5mm Q345 Welding Metal Stamping Service Solar Bracket

Product Specification

Carbon Steel Q345 Welding Stamping Parts Welding Solar Bracket
 
Steel welding stamping parts introduction

1.Welding Stamping Parts material: aluminum / stainless steel /  steel / alloy steel / brass

2.Welding Stamping Parts are mainly composed of using metal stamping / deep drawing / shearing / punching.

3.Welding Stamping Parts machine including Hand arc welding, submerged arc welding, tungsten electrode argon arc welding, melting electrode gas shielded welding

4. The surface of the welding Stamping Parts is powder sprayed / painted /passivation. The product is not easily affected by the environment during the later use, which causes other problems such as rust..

What is welding process?

The welding Stamping Parts process is related to the welding method and other factors. The operation must be determined according to the material, brand, chemical composition of the workpiece to be welded, the type of weldment structure, and welding performance requirements.

We must first determine the welding Stamping Parts method, such as manual arc welding, submerged arc welding, tungsten argon arc welding, melting electrode gas shielded welding, etc. There are many types of welding methods, which can only be selected according to the specific circumstances. After determining the welding method, formulate welding process parameters. The types of welding process parameters are different. For example, manual arc welding mainly includes: electrode type (or brand), diameter, current, voltage, welding power source type, polar connection method, welding Number of floors, number of tracks, inspection methods, etc.

* High efficiency and long service life;

* Durable and reliable;

* Economical, practical and easy to install;

*Can be customized according to customer drawings and requirements

*Your inquiry will be answered within 24 hours.
 

 
Below is some questions you may want to know:
Questions: How to know the chemical composition of stainless steel deep drawing parts according to our requirements?
Answers: When we offer samples or batch parts, we will also send you our material list from our material factory, it shows more detailed.
Questions: How to guarantee your final size can meet our drawing request?
Answers: we will make moulds according to your 3D drawing. And we also do sampling when batch production start, to make assure the final dimension can meet your request.
Questions: How to make sure the color after painting or powder coating can be correct?
Answers: We have color card with different color number, such as RAL9016, we will contrast the sample surface and color card, to make sure the final surface effect is correct.
Questions: Generally, how do you packing the goods?
Answers: normally, for inner package: the goods is nude, for outer package: carton + plywood. If you have special request for inner or outer package, pls indicate it when you send us new inquiry.
Questions: If we find the defect products exist in the batch parts, how to do?
Answers: Yes,your caution is very good, in fact, when batch production, we need do sampling. Before shipment, we also do testing to make sure the quality is ok. If you found several defect product exists, pls take photos and send your quality feedback, we will check and send you quality products. But pls be assured that our products is qualified, unless caused by the worker's mistake to place.