Qingdao Guihe Measurement & Control Technology Co., Ltd
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 5000PCS per month |
| Delivery Time | 5-7 working days |
| Packaging Details | pipe leak detector wooden case packing |
| product name | fuel pipeline leak detector |
| Inspection time | ≤1s |
| Cabling mode | Parallel input |
| keywords | pipe leak detector |
| Application | gas station underground pipe |
| Warranty | 12 months |
| Brand Name | Guihe |
| Model Number | SYW-SL |
| Certification | PCEC Explossion proof certification |
| Place of Origin | China |
View Detail Information
Explore similar products
gas station SYW - SL 6 Sensors Support Automatic gasoline Fuel pipe leak
protecting the environment 220V petroleum fuels Automatic Pipe Line Leakage
Fuel Pipe Leak Testing Equipment , Double Wall Oil Line Leak Detector
Petrol Station Stainless Steel Material 220V Double Wall Automatic pipe Line
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 5000PCS per month |
| Delivery Time | 5-7 working days | Packaging Details | pipe leak detector wooden case packing |
| product name | fuel pipeline leak detector | Inspection time | ≤1s |
| Cabling mode | Parallel input | keywords | pipe leak detector |
| Application | gas station underground pipe | Warranty | 12 months |
| Brand Name | Guihe | Model Number | SYW-SL |
| Certification | PCEC Explossion proof certification | Place of Origin | China |
| High Light | electronic line leak detector ，pipe leak testing equipment | ||
Double walled pipe leakage detector, fuel and water leak detection alarm for UPP KPS FRANKLIN fuel filling pipeline
P
Underground Double wall Pipe Leakage Detector
Product introduction:
GUIHE Management offers fuel leak detection solutions that will find leaks before they find you.
The fuel leak detection system has these basic parts:
Fuel-Leak-Detection
Sensing cables – these cables provide early detection of below ground or above ground “weeps and seeps” before they accumulate into large spills. And the location is reported to the nearest meter.
Probes – these detect fuel floating on water or fuel accumulating in low spots like sumps or valve pits or on flat surfaces like pump pads. The probes react instantly to even a thin film of fuel and can be reset and reused and even “wet tested” if desired.
Sensor Interface Modules and Alarm Panels – these are designed to energise the sensor cables and probes, monitor their condition and report the existence and location of any leak detection to operators and other alarm and supervisor systems.
Technical Parameters:
Detector voltage:220VAC Sensor voltage :+12VDC
Alarming mode :audible and visual alarm Inspection time:≤1s
Range of temperature :-40℃~+70℃ Environment humidity:<85%
Output mode:switch value Cabling mode:Parallel input
Detector size:300*180*113 Number of supported sensors :12
Product Features:
1, Running safety, stability, easy maintenance: sensor device is composed of liquid float switch, with simple structure and stable running.
2, High sensitivity: response time is less than one second.
3, Less cost, high efficiency:one leakage detector can take six leakage
detection sensor, each leakage detection sensor can take four double-layer pipeline and one manhole well.
4, Simple installation and wide application : it can be easily installed in a gas station, oil depot and other regions.
5, Relay output port, can make the equipment chain control with a third party.
6, 485 communication port can realize uploading function.
Install Leakage Detection Sensor:
1, Put the Leakage detection sensor vertical installed in the fixed bolt of manhole well.
2, Connection pipe test ports and detection device ports with oil conduit,oil conduit need short enough to avoid bending.
3. Connect snorkel to his connection Port.Complete the snorkel connection,the specific location is : on the manhole well inner wall of oil tank , directly above 1m and vertical direction.
4. Installation :use and maintenance of detection sensor should also comply with the product manual,GB3836-2010 explosion-proof criteria,Design of automotive filling oil and gas,construction specifications and other national standards. It is only allowed to make the installation construction who have the qualification of explosion-proof electrical equipment installation.
1. Provide necessary conditions for the customers visiting factory.
2. Good quality with competitive price.
3. All products have been strictly Quality Checked before shipping.
4. Free repair within 12 months.
5. Great after-sale service and offer solution within 24 hours.
6. OEM is ok.
Qingdao Guihe Measurement & Control Technology Co., Ltd was founded in 2002, is a professional manufacturer of petroleum equipment. We specialized in producing Magnetostrictive liquid level meter (tank gauging system), Underground fuel tank volume table calibration system, Double layer tank leakage detector, Double layer pipeline leakage detector, Tank car liquid level meter, Human body electrostatic discharge alarm. We also providing different customers with personalized solutions.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
3000000-50000000
Employee Number:
100~500
Ecer Certification：
Active Member
Qingdao Guihe Measurement & Control Technology Co., Ltd was founded in 2002, is a professional manufacturer for petrol station and oil depot equipment. We specialized in producing Magnetostrictive probe, Automatic tank gauge, Oil depot tank level gauge, Tank truck ATG, Unde... Qingdao Guihe Measurement & Control Technology Co., Ltd was founded in 2002, is a professional manufacturer for petrol station and oil depot equipment. We specialized in producing Magnetostrictive probe, Automatic tank gauge, Oil depot tank level gauge, Tank truck ATG, Unde...
Get in touch with us
Leave a Message, we will call you back quickly!