Winan Industrial Limited
| Payment Terms | T/T, L/C, Western Union |
| Supply Ability | 300 Sets/Month |
| Delivery Time | Shipped in 15 days after payment |
| Packaging Details | Carton, Pallet, Wooden case or as required |
| Type | Vertical/horizontal |
| Capacity | 200-10000L |
| Flow range | 4-360L/S |
| Working Pressure | 6-12 bar |
| Mixing Ratio | 3% or 6% |
| Proportioner Size | 3"-10" |
| Material | Carbon Steel |
| Color | RAL3000 |
| Usage | Foam / Water fire sprinkler |
| Item Name | Foam Bladder Tank |
| Brand Name | WINAN |
| Model Number | PHYM |
| Certification | ISO CCCF |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Vertical / Horizontal Water Bladder Tank Fire Fighting Suppression Foam Type
200L-10000L Tank Bladder Tank Foam System Fire Protection 6-12 Bar Working
Carbon Steel Material Pressure Gauge Foam Bladder Tank 3% 6% Vertical /
Bladder Tank Foam Proportioning Machine 3% 6% Carbon Steel Red For Firefighting
Product Specification
| Payment Terms | T/T, L/C, Western Union | Supply Ability | 300 Sets/Month |
| Delivery Time | Shipped in 15 days after payment | Packaging Details | Carton, Pallet, Wooden case or as required |
| Type | Vertical/horizontal | Capacity | 200-10000L |
| Flow range | 4-360L/S | Working Pressure | 6-12 bar |
| Mixing Ratio | 3% or 6% | Proportioner Size | 3"-10" |
| Material | Carbon Steel | Color | RAL3000 |
| Usage | Foam / Water fire sprinkler | Item Name | Foam Bladder Tank |
| Brand Name | WINAN | Model Number | PHYM |
| Certification | ISO CCCF | Place of Origin | Guangdong, China |
| High Light | foam bladder tank ，foam proportioning equipment | ||
Fire Suppression 50 Gallon Foam Bladder Tank For Fire Fightin
INTRODUCTION
The foam bladder tank is the main unit of the foam extinguishing system. The device consists of pressure tank, bladder, proportioner, pressure gauge, valves and pipeline. A pump is needed to supply pressurized water. When pressurized water flow though proportioner, a small part of water (3%-6%) flow into tank from branch pipe to press the bladder to swap out equal foam concentrate and then mix with another part of water (97%-93%) to form foam solution in proportioner and provide to foam generator.
The foam tank and the low/medium expansion foam generator construct the low/medium foam spraying system. It can also construct the high expansion total flooding extinguishing system with high expansion foam generator.It is especially suitable to put out fire caused by inflammable liquid tank or large scale of spill fire.This method allows the water/foam ratio to remain stable by automatically adjusting to the variable flow rates and pressure conditions that may occur during system operation. It aims at fire of class A and class B, especially for fire of class B. The foam bladder tank mainly applied in occasions such as places where inflammable liquid was produced, stored and transported. This feature makes bladder tanks particularly suitable for multiple hazard systems, sprinkler systems and any other system operating under variable, non predictable, flow and pressure conditions.
PARAMETERS
| Working Pressure Range (MPa) | 0.6~1.2 (87~174 PSI) | |
| Pressure Drop (MPa) | ≤0.2 | |
| Test Pressure | Strength (MPa) | 1.5 |
| Sealing (MPa) | 1.32 | |
| Tank Capacity (L) | 200~15000 (52~3963 Gallon) | |
| Size of Proportioner (mm) | DN80~DN250 (3"~10") | |
| Flow Capacity(L/S) | 4~360 (63~1513 GPM) | |
| Mixing Ratio (L/S) | 3% OR 6% | |
INSTALLATION
1. Device should be installed at places with shelter to avoid sun and rain. Ambient temperature should be within 40°C and leave enough space for operation. Device should be installed at concrete floor and fastened with anchor nuts.
2. Do the hydraulic test after installing. Open the tank vent valve first then fill water into bladder from concentrate draining pipe. Then close tank vent valve when bladder is full of water. Pressurize the system and keeping for 10 minutes when pressure gets test pressure, tank should have no leakage. Close water inlet valve and open water drainage valve and concentrate drainage valve to drain water away in tank and bladder. (We will do this test when products leave the factory)
FAQ
1. Do you offer free sample for your clients?
Yes, we offer sample for most of the products.
2. What's the MOQ of your products?
Our MOQ is one (1) piece/set.
3. Are you manufacturer with your own factory?
Yes, we are the manufacturer for more than 20 years.
4. What's your payment terms?
We accept T/T, L/C, Western Union,etc.
5. How long is the delivery time?
Usually around 12 days after payment.
6. Do you have technical support?
Yes, we have a professional engineering team.
7. Do you have warranty?
Yes, all products have one year warranty.
8. Can you accept OEM?
Yes, we do customized design for our clients.
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
1995
Total Annual:
5million-10million
Employee Number:
100~200
Ecer Certification：
Active Member
Winan Industrial Limited The Winan Industrial Limited. (WINANF FIRE) was set up in 1995 with registered capital of 13,680,000RMB. We specialized in manufacturing and installing fire fighting equipment for more then 20 years and we devote to provide our clients with high quality and reliable produ... Winan Industrial Limited The Winan Industrial Limited. (WINANF FIRE) was set up in 1995 with registered capital of 13,680,000RMB. We specialized in manufacturing and installing fire fighting equipment for more then 20 years and we devote to provide our clients with high quality and reliable produ...
Get in touch with us
Leave a Message, we will call you back quickly!