Product Specification

Overhead Electric Power ADSS Fiber Optic No Armoured Cable Track-resistant Outer Sheath High voltage HDPE 110KV

       ADSS cable, Loose tube construction, tubes jelly filled, tubes with filler rods lay up around non-metallic FRP (Fiber-glass Reinforced Plastic) central strength member, water-blocking material, aramid yarns reinforced and HDPE outer sheath.

       ADSS cable is up to 144 optical fibres in jelly-filled loose tubes, laid up around a central non-metallic strength member. The cable is water blocked, aramid yarn reinforced and polyethylene sheathed. Surface printing for the cable includes sequential length marking at one-metre intervals. Mainly installed at existing 220kV or lower voltage power lines . Two Jacket and stranded loose tube design.

     Two important materials: 1.  It is Track-resistant HDPE; 2.  Imported aramid.

   Applications: 

  Cable design

         1. 48 SM-fibers

         2. G652 D operating wavelength at 1260~1625nm.

         3. FRP as central strength member.

         4. Loose buffer tubes SZ-stranded.

         5. The buffered tube filled with filling compound while the stranded core covered with water block material

         6. Aramid yarns as peripheral strength member

         7. Track-resistant HDPE(PE outer sheath is applied for the application in which cable is installed at the place where the spatial potential ≤12KV)

        8. Suitable as: Aerial installation (Span:150m)

   Reference Standard

       IEC 60793-1, 60793-2, 60794-1

 ITU-T G650, G652

  Fiber color coding

      Tube color coding

            The tubes and filler rods are stranded according to full color code as follows, if there are fillers, the color will be natural.
   Cable structure and parameter

 Mechanical Performance of Cable

  Characteristic of Optical Fiber

G652D

Core material

The core of the optical fiber, with a higher refractive index compared to the cladding, is made of SiO₂ (Silicon dioxide) doped with GeO₂ (Germanium dioxide).

Cladding material

The cladding of the optical fiber is made of SiO₂ (Silicon dioxide).

Type of primary coating

The primary coating is made of an UV-curable acryl ate.

 Characteristic of Optical Cable

  Environmentally

   The product is accord with the instruction of EU ROHS

  Packing and Logo

   1 Packing

   1.1 Each single length of cable shall be wound on an Iron stand-wooden composite drum.

   1.2 Covered by plastic buffer sheet.

   1.3 Sealed by strong wooden battens.

   1.4 Drum length

   1.4.1 Standard drum length is 4000m;

   1.4.2 Total quantity is at least the ordered quantity.

   1.4.3 Or it can be delivered according to customers’ requirements, but not longer than 5000m.

   2. Drum Marking

• Manufacturer name;
• Manufacturing year and month;
• Roll-direction arrow;
• Cable outer end position indicating arrow;
• Cable type and size;
• Drum number;
• Drum length;
• Gross / net weight;
• Caution plate indicating the correct method for loading, unloading and convey the cable;
• Other customer information such as contract no., project no., and delivery destination. (if needed)

   3 Cable identification documents

• Product qualified certificate;

          Test report.

Package and Shipping:

A. All of our fiber optic cable package are with export wooden drum.

B. 2~3km/drum, Outdoor fiber optic cable's wooden dimension is 110cm*110cm*71cm, 0.85CBM,

C. Can be load about 39 drums for a 20GP.

Also accept custom cable drum from customers. welcome to contact us!