Payment Terms | T/T |
Supply Ability | 100000 Tons per year |
Delivery Time | 2-10weeks |
Packaging Details | Plywood cases or pallets |
Standard | ASTM |
Grade | A234 |
Product name | 45D Bend |
Type | Steel Pipe Bend |
Brand Name | HEBEIPENGXIN |
Model Number | 45D Bend, ASTM A234 WPB, 3D Radius, 4 Inch, SCH STD, Standard ANSI B16.49, Beveled Ends |
Certification | ASME |
Place of Origin | CHINA |
View Detail Information
Explore similar products
Schedule 40 60 Deg A234 WPB DN200 Steel Pipe Bend 5D Oiled Surface
30Degree ANSI B16.49 4 Inch Radius 3D Steel Pipe Bend ASTM A234 WPB
10D ASTM A234 Grade WPB 4 Inch 45 Degree Bend , Metal Pipe Bender Hot Rolled
ASTM A234 WPB 5D 6 Inch Steel Pipe Bend , 60 Degree Pipe Bend SCH40
Product Specification
Payment Terms | T/T | Supply Ability | 100000 Tons per year |
Delivery Time | 2-10weeks | Packaging Details | Plywood cases or pallets |
Standard | ASTM | Grade | A234 |
Product name | 45D Bend | Type | Steel Pipe Bend |
Brand Name | HEBEIPENGXIN | Model Number | 45D Bend, ASTM A234 WPB, 3D Radius, 4 Inch, SCH STD, Standard ANSI B16.49, Beveled Ends |
Certification | ASME | Place of Origin | CHINA |
High Light | ANSI B16.49 Steel Pipe Bend ,SCH STD Steel Pipe Bend ,ASTM A234 WPB 3d pipe bend |
45D Bend, ASTM A234 WPB, 3D Radius, 4 Inch, SCH STD, Standard ANSI B16.49, Beveled Ends
Bend pipe is a complete set of bending equipment for bending, divided into cold simmer and hot push two processes. No matter which kind of machine equipment and pipeline, most of them are used to bend pipe, mainly for oil, gas, infusion, engineering bridge construction and so on.
Analysis of the main causes of the decrease in the quality of the bend pipe and the methods for attention:
When the 1. is pure bending, the outer arm wall of the neutral layer is thinned by tensile stress &1 under the action of M external force distance, and the inner compression stress. The joint force N1 and N2 make the cross section of the pipe change. On the basis of this factor, the main reasons for the decrease of bend pipe quality are RX and SX. Therefore, in the GBJ235-82, the RX value and the lateral thinning amount under various pressure grades are clearly stipulated. The purpose is to control the value of RX and SX to ensure quality.
As has been said in the front of the 2., the outside of the material is pulled when the bend is bent, and the position of the inner compression neutral shaft is different from the bend method. The neutral axis is 2/3 from the outer wall. Therefore, thin-walled pipe bending, the use of rotary bending method is beneficial.
3. the accuracy of bending tire is also one of the factors affecting the quality of bend pipe. In the manufacture of bending tire, in addition to the specification and size requirements to control in a certain tolerance range, but also require users to use according to the bending pipe diameter to select the corresponding bending tire.
4. bending property and surface corrosion of pipe itself may also affect the quality of bend pipe. During site construction, the operator should also understand the material, processing performance and surface corrosion of the pipeline.
5. R. available The curve of bending radius / tube diameter is used for reference when selecting the relationship between pipe diameter and wall thickness. Reflecting the influence of relative bending radius and relative wall thickness on the quality of bend pipe, according to the acceptance code of pipe processing: cold bending steel pipe, medium and low pressure 4 D, high pressure 5 D. Therefore, our bending tire design is R=4 D( special case), so the pipe bender produced by our factory mainly chooses the relative wall thickness SX, the upper part of the drawing is the coreless shaft area, the middle part of the drawing is the ordinary core shaft area, and the lower part of the drawing is the special core shaft area. Because the special core shaft design and manufacture are very difficult, the operation is not very convenient, so I generally do not supply. Special circumstances may be agreed upon separately.
Carbon Steel Bend |
|
Stainless Steel 6D pipe bends |
|
Alloy Steel ASME B16.9 5d bend |
|
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
2002
Total Annual:
21000000-45000000
Employee Number:
100~200
Ecer Certification:
Active Member
HEBEI PENGXIN PIPELINE EQUIPMENT GROUP CO.,LTD.. was established in the early 1990s, is located in China elbow pipe capital "mengcun" golden hinterland New hope. Here north of Beijing and Tianjin, south of Jinan, east Huanghua port, excellent location, ease of access and the uniq... HEBEI PENGXIN PIPELINE EQUIPMENT GROUP CO.,LTD.. was established in the early 1990s, is located in China elbow pipe capital "mengcun" golden hinterland New hope. Here north of Beijing and Tianjin, south of Jinan, east Huanghua port, excellent location, ease of access and the uniq...
Get in touch with us
Leave a Message, we will call you back quickly!