Suzhou Delfino Environmental Technology Co., Ltd.
| Payment Terms | Western Union, L/C, T/T |
| Supply Ability | 100 piece/ month |
| Delivery Time | negotiatable |
| Packaging Details | Carton and PE foam |
| Product Name | dissolved oxygen sensor |
| Model | OPD7 |
| Range | 0.00~20.00 mg/L |
| Principle | Fluorescence method |
| Resolution | 0.01 mg/L |
| Accuracy | 0.1 mg/L |
| Response Time | T90 less than 60s |
| Temperature Compensation | Automatic, built-in temperature unit |
| Protection Grade | IP68 |
| Operating Temperature | 0.0~50.0℃ |
| Material | ABS |
| Weight | 170g(not include wire) |
| Brand Name | Daruifuno |
| Model Number | OPD7 |
| Certification | ISO9001 CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Titanium Solution Ground PH Electrode With NTC10K Temp. Unit For Industrial
Fluorescence Dissolved Oxygen Sensor Enhanced ABS For Power Plant
Do Probe Dissolved Oxygen Sensor ABS Water Station Monitoring
RS485 Interface Fluorescence Principle Dissolved Oxygen Sensor For Sewage Water
Product Specification
| Payment Terms | Western Union, L/C, T/T | Supply Ability | 100 piece/ month |
| Delivery Time | negotiatable | Packaging Details | Carton and PE foam |
| Product Name | dissolved oxygen sensor | Model | OPD7 |
| Range | 0.00~20.00 mg/L | Principle | Fluorescence method |
| Resolution | 0.01 mg/L | Accuracy | 0.1 mg/L |
| Response Time | T90 less than 60s | Temperature Compensation | Automatic, built-in temperature unit |
| Protection Grade | IP68 | Operating Temperature | 0.0~50.0℃ |
| Material | ABS | Weight | 170g(not include wire) |
| Brand Name | Daruifuno | Model Number | OPD7 |
| Certification | ISO9001 CE | Place of Origin | China |
| High Light | Dissolved Oxygen Sensor IP68 ，RS485 Interface Dissolved Oxygen Sensor ，Fluorescence Dissolved Oxygen Analyzers | ||
Fluorescence Digital Dissolved Oxygen Sensor For Thermal Power Plants
The dissolved oxygen analyzer(DO controller and DO sensor) is widely used in industrial applications. For example, in thermal power plants, in order to inhibit the metal corrosion of the system by dissolved oxygen in the water and ensure the safe and economic operation of thermal equipment, the dissolved oxygen content of the outlet water and condensate of the deaerator should be monitored to facilitate Adjust the operating conditions or change the operating mode according to the monitoring results to reduce the dissolved oxygen content to the allowable range.
Specification of Dissolved Oxygen Sensor
| Model | OPD70 |
| Measuring Range | Oxygen content: 0.00~20.00 mg/L |
| Resolution | 0.01mg/L 1% |
| Accuracy | 0.1 mg/L 1% |
| Response Time | T90 less than 60s |
| Temperature Compensation | Automatic, built-in temperature unit |
| Calibration Method | Zero position/slope/deviation |
| Work Pressure | 0~3Bar |
| Operating Temperature | 0.0~50.0℃ |
| Material | ABS |
| Dimensions | Diameter: 35mm Total length: 260mm |
| Installation Size | 1"NPT at both ends of the installation thread; |
| Protection Grade | IP68 |
| Weight | 170g |
Features of the dissolved oxygen sensor
● No calibration required
● Without consuming oxygen
● All-in-one package
● RS485 interface, Modbus RTU
● The protection grade is IP68
● Internal storage of calibration data
● Automatic temperature compensation
Factors affect the measurement of dissolved oxygen
1. The water temperature: The higher the water temperature, the lower the solubility of oxygen.
2. Pressure: The solubility of gas is also closely related to atmospheric pressure, so pay attention to compensation for atmospheric pressure.
3. The dissolved salt in the water: At the same temperature, the dissolved oxygen will decrease by about 1% for every 100mg/L increase in salt content.
In addition, the diffusion of oxygen through the solution is faster than the diffusion through the membrane, and the flow rate is too slow to cause interference. Our dissolved oxygen controller has the compensation for air, salinity and temperature.
Application
◇ Sewage
◇ Surface water monitoring
◇ Aquaculture water bodies
◇ Urban sewage treatment
◇ Industrial wastewater treatment
◇ Aquariums
FAQ:
1. Is your company a manufacturer?
We are a manufacturer. We have our own R&D team and production workshop to ensure the quality and quantity of products.
2. How is the price of the product determined?
The price of the product is ordered according to the purchase quantity. If your purchase is large and will have a long-term cooperation, then we will give you a special price.
3. How long is your production cycle?
According to your quantity and product model, we have our own production workshop, generally within 50, we can finish it in one month as soon as possible.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2015
Ecer Certification：
Verified Supplier
Suzhou Delfino Environmental Technology Co., Ltd. is a professional manufacturer of water analysis instruments and sensors, integrating development and production together. Our main products include online, portable water quality analysis instruments. Since its establishment, we have focused on the ... Suzhou Delfino Environmental Technology Co., Ltd. is a professional manufacturer of water analysis instruments and sensors, integrating development and production together. Our main products include online, portable water quality analysis instruments. Since its establishment, we have focused on the ...
Get in touch with us
Leave a Message, we will call you back quickly!