High Accuracy Plastic Molding / Abc Plastic Moulding For Tool Box

Product Specification

Plastic injection tooling with ABS/PC material for Tool box

Product Quick detail:

1. Cavity: single cavity mold

2. Molding Material: ABS/PC

3. Mold type: serial mold

4. Mold style: big size mold

5. Mold base standard: Hasco

6. Runner system: hot runner

7. Delivery terms: FOB

8. Mold life: 500K Shots

9. Mold status: Insert mold

10. Cavity steel: LKM738H+Nitriding

Product specification:

1. Hot runner brand: Synventive
2. Gate style: hot runner with Valve gate on the part
3. Ejection: ejector pins and sleeve
4. Mold unit: Metric tools
5. Surface finish: normal polishing
6. Combining Moldflow analysis to optimize design
7. Combining DFM report to optimize design
8. Mold structure is safty and stable
9. Mold have sufficient air venting
10. Mold have sufficient cooling line
11. Mold produce the Part no defective, such like sink mark, bur mark, flow mark, flush etc
12. Scientific trial out to find optimum injection parameter
13. Every procedure follow ISO9001 strictly
14. Before tool shipped out no any sigle open opint
15. We will make the lifter and (inner) slider in these undercut position.

Product advantage:

1. Mold match customer injection machine
2. Mold is desgined follow customer standard
3. Mold is bulit with safest operation when production
4. Mold is in guarantee all over the word
5. 3 Parters in different area can deal it, in Mexico,Czech and Spain can provide after-serivice on the overseas.
6. Tool have been testing and pass the CPK.
7. Tool have been bulit in High Quality and short lead time with best engineering service

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Issue Solution example

Weld Lines

Description: Weld lines are actually more like a plane than a line that appears in a part where molten plastics meet each other as they flow from two different parts of the mold.

Causes: Weld lines are caused by the inadequate bonding of two or more flow fronts when there is partial solidification of the molten plastic.

Remedies:

1. Raise the temperature of the mold or molten plastic.
2. Increase the injection speed.
3. Adjust the design for the flow pattern to be a single source flow.
4. Switch to a less viscous plastic or one with a lower melting temperature

Short Shot

Description: As the term implies, short shots can be described as a situation where a molding shot falls short. This means that the molten plastic for some reason does not fully occupy the mold cavity or cavities, resulting in a portion where there is no plastic. The finished product becomes deficient because it is incomplete.

Causes: Short shots can be caused by a number of things. Incorrect calibration of the shot or plasticizing capacities can result in the plastic material being inadequate to fill the cavities. If the plastic is too viscous, it may solidify before fully occupying all the cavities and result in a short shot. Inadequate degassing or gas venting techniques can also result in short shots because air is trapped and has no way to escape; plastic material cannot occupy the space that air or gas is already occupying.

Remedies:

1. Select a less viscous plastic with higher flowability. This plastic will fill the hardest-to-reach cavities.
2. Increase mold or melt temperature so as to increase flowability.
3. Account for gas generation by designing the mold so that gas is not trapped within the mold and is properly vented.
4. Increase the material feed in the molding machine or switch to a machine that has a higher material feed in the event that the maximum material feed has been reached.

=======================================================================================

Our Main Services:

1. Plastic molds:

Hot runner mold, precision mold, over mold, two-shot mold, unscrewing mold, multi-cavity mold, IML/IMI mold, Stack mold, Die-casting mold, etc.

90% molds exported to North America, South American, Europe and Australia.

2. Injection Molding:

We have rich experience in molding various engineering grade resins:

ABS, PC, PC+GF, PC/ABS, PBT, PA6+GF, PA66+GF, PPS, PU, PP, PE, TPE, TPU, LCP, Ultem, etc.

3. One Stop Services

Based on our strong engineering capability,GOM provide a full turnkey solution for customers bespoke plastic

injection moulding needs inclusive of design, development, mould tooling, production and post moulding support.

• 3D Scanning

• Prototype

• Painting

• Pad-printing

• Silk-Screen Printing

• Hot Stamping

• Plating

• Color Match

• Ultrasonic Welding

• Automation

• Production Line Assembly

• Precision Metal Parts

• Die casting Parts