Green / Yellow Football Field Balcony Roof Fake Grass Outdoor Mat

Product Specification

Payment Terms	L/C, T/T	Delivery Time	5-15 work day
Color	green/yellow	Delivery time	3-10 Days
Pile height	8cm	Material	plastic
Size	40*60 cm	Density	308 grass
Brand Name	PALM TREE	Place of Origin	HeBei China
High Light	balcony fake grass outdoor mat ，Football Field Simulated Green Lawn

Artificial turf for football field, artificial simulation lawn, balcony roof greening grass

 

For crafts or the bigger works like buildings, artificial grass is very suitable for your projects.
Imagine you can suit your garden furniture, even your car inside or out with artificial grass! Our artificial grass is perfectly soft and you can give your vehicle, garden or home touch of green. Make a nice artificial grass for your children’s room to give it a natural feel. Or use it for decorating an exhibition stand. This will surely attract viewers to you stand, giving you the opportunity to start a conversation.

 

 

 

Color	green/yellow
Delivery time	3-10 Days
Pile height	8cm
Material	plastic
Size	40*60 cm
Density	308 grass

 

 

Advantages of artificial grass:

 

Adhere to the idea of safety and protection
Convenient daily maintenance and low cost
Good elasticity, shock absorption, noise abatement, safety, quietness
Availability of lineation and mark, without the need of relining, easy maintenance
Ensure stable performance even under ultraviolet sunshine
Resistance to moisture, contraction and expansion on the surface, anti corrosion and mold prevention, without chemical reaction
Containing anti-corrosion additive, firm sewing of fiber yarn
Environment-friendly artificial grass, construction of finished product, free from toxic substances, without the need of maintenance, quick and convenient installation
Extremely ventilated and permeable, not glued to the bottom
Safe, non-toxic, elastic with less sport injury
Evergreen, fastness without cracking, good flame resistance, suitable for all kinds of weather

 

 

How to install the Simulated Green Lawn:

 

 

 

 

1.1. Inspection:

 

 

 

Inspect the foundation to ensure it has a flat and smooth surface and appropriate slopes,making sure the foundation is qualified for installing artificial turf;

 

 

 

1.2. Measuring:

 

 

 

Locate the centers of the ground and the two semicircles, and according to these three centers locate the intersecting point of half-way lines and touchlines, and then determine the positions of functional lines and spot by using Pythagorean proposition;

 

 

 

2. Turf layout:

 

 

 

According to drawing, position the turf rolls on the exact places along the touchline.The turf with white lines should be placed at the half-way lines and base line, and then lay out the rolls in order;

 

 

 

3. Preparing functional line:

 

 

 

Cut white turf piece into strips(width to be as per actual need) for white functional lines(half-way lines, base lines etc.), and put them aside preparing for Green Artificial Grass Carpet installation;

 

 

 

4. Seaming:

 

 

 

The adiacent turf rolls must be join together with 20~30mm excess on both sides, then cut the excess part with a special cutting knife on the joint center and trim the cut to make the turf join perfectly together. After trimming, place the seam tape on the foundation surface and make the joint line of turf right on the middle of the seam tape. And then apply the adhesive to seam tape evenly with a rubber spreader, and press down the turf on both sides of the seam tape firmly;

 

 

 

5.1. Installing functional lines:

 

 

 

Measure and re-position the functional line on the turf that has been all well joined on the ground. Cut the turf out and place the seam tape beneath the cuts, then spread the adhesive on the seam tape and install the well-prepared functional lines, press it firmly to ensure the immobility.

 

 

 

5.2. Trimming:

 

 

 

Inspect the finished lawn, if any uneven found, cut it open, pull it straight and cut the excess away.And rejoin it with adhesive;

 

 

 

6. Infilling sand:

 

 

 

Place the sand piles on the finished lawn on different spots evenly at a distance of 4m from each other,then spread them evenly on the lawn(the quantity if sand depends on the pile height of the turf).

Afterwards, use the combing machine to sweep the sand into the fibers and to comb uo the fibers. Do this process once longitudinally and transversely.

 

 

 

7. Infill rubber granules:

 

 

 

After sand infilling, Place the rubber granules piles on the lawn on different spots evenly at a distance of 4m from each other, then spread them evenly on the lawn(the quantity of sand depends on the pile height of the turf). Afterwards, use the combing machine to sweep the sand into the fibers and to comb up the fibers. Do this process once longitudinally and transversely.

 

 

 

8. Combing:

 

 

 

Once the infilling is finished, comb the turf once more with the combing machie to make the fibers point up to the sky.

 

 

 

9. Inspection:

 

 

 

Inspect the entire finished lawn as per concerned standards and requirement.If any defects found, correct it.