Bicheng Electronics Technology Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 5000PCS per month |
| Delivery Time | 8-9 working days |
| Packaging Details | Vacuum bags+Cartons |
| Base material | RO4730G3 20mil |
| Layer count | 2 layers |
| PCB thickness | 0.6mm |
| PCB size | 110mm x 50mm = 1 type = 1 piece |
| Solder mask | Green |
| Silkscreen | White |
| Copper weight | Outer layer 35 μm |
| Surface finish | Immersion gold |
| Brand Name | Bicheng |
| Model Number | BIC-058.V1.0 |
| Certification | UL, ISO9001, IATF16949 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Rogers 4350 High frequency PCB 1.524mm Double Sided RF Circuit Board
High frequency PCB Rogers 10mil 0.254mm RO4350B Double Sided RF PCB
Rogers PCB 60mil 1.524mm RO4003C Double Sided RF PCB for WLAN
Customized Double Sided RF PCB 32mil Rogers 0.813mm RO4003C
Product Specification
| Payment Terms | T/T | Supply Ability | 5000PCS per month |
| Delivery Time | 8-9 working days | Packaging Details | Vacuum bags+Cartons |
| Base material | RO4730G3 20mil | Layer count | 2 layers |
| PCB thickness | 0.6mm | PCB size | 110mm x 50mm = 1 type = 1 piece |
| Solder mask | Green | Silkscreen | White |
| Copper weight | Outer layer 35 μm | Surface finish | Immersion gold |
| Brand Name | Bicheng | Model Number | BIC-058.V1.0 |
| Certification | UL, ISO9001, IATF16949 | Place of Origin | CHINA |
| High Light | 2 Layers Immersion Gold PCB ，0.6mm Immersion Gold PCB ，IATF16949 0.6 mm PCB | ||
Rogers High Frequency PCB Built On RO4730G3 20mil 0.508mm DK3.0 With Immersion Gold for Cellular Base Station Antenna
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Rogers RO4730G3 antenna grade laminates are reliable, low-cost alternative to the conventional PTFE-based laminates. It has the mechanical and electrical properties that antenna designers need. The materials have a dielectric constant of 3.0 and a loss tangent of 0.0022 measured at 2.5 GHz when using LoPro Reverse Treated EDC foil. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Materials are available with demonstrated low PIM performance, with values better than -160dBc.
RO4730G3 materials are compatible with conventional epoxy and high temperature lead-free solder processing. It does not require the special treatment needed on traditional PTFE-based laminates for plated through holes preparation. Multi-layer can be achieved using RO4450F bondply at 175 ℃. The resin systems of RO4730G3 are designed to provide the properties sought after by antenna designers. The glass transition temperature exceeds 280oC, leading to a low Z-axis CTE, excellent plated through holes reliability, and lead free solder processability.
Typical application is cellular base station antennas.
General description
This is a type of double sided RF PCB built on 0.508mm (20mil) RO4730G3 for the application of Cellular Base Station Antenna PCB.
Basic specifications
Base material: RO4730G3 20mil (0.508mm)
Dielectric constant: 3.0+/-0.5
Layer count: 2 layers
Type: Through holes
Format: 110mm x 50mm = 1 type = 1 piece
Surface finish: Immersion gold
Copper weight: Outer layer 35 μm
Solder mask | Legend: Green | White
Final PCB height: 0.60 mm
Standard: IPC 6012 Class 2
Packing: 20 pieces are packed for shipment.
Lead time: 7 working days
Shelf life: 6 months
Data Sheet of Rogers 4730 (RO4730G3)
| RO4730G3 Typical Value | |||||
| Property | RO4730G3 | Direction | Units | Condition | Test Method |
| Dielectric Constant,εProcess | 3.0±0.5 | Z | 10 GHz 23℃ | IPC-TM-650 2.5.5.5 | |
| Dielectric Constant,εDesign | 2.98 | Z | 1.7 GHz to 5 GHz | Differential Phase Length Method | |
| Dissipation Factor,tanδ | 0.0028 | Z | 10 GHz 23℃ | IPC-TM-650 2.5.5.5 | |
| 2.5 GHz | |||||
| Thermal Coefficient of ε | +34 | Z | ppm/℃ | -50 ℃to 150℃ | IPC-TM-650 2.5.5.5 |
| Dimensional Stability | <0.4 | X, Y | mm/m | after etech +E2/150 ℃ | IPC-TM-650 2.4.39A |
| Volume Resistivity (0.030") | 9 X 107 | MΩ.cm | COND A | IPC-TM-650 2.5.17.1 | |
| Surface Resistivity (0.030") | 7.2 X 105 | MΩ | COND A | IPC-TM-650 2.5.17.1 | |
| PIM | -165 | dBc | 50 ohm 0.060" | 43 dBm 1900 MHz | |
| Electrical Strength (0.030") | 730 | Z | V/mil | IPC-TM-650 2.5.6.2 | |
| Flexural Strength MD | 181 (26.3) | Mpa (kpsi) | RT | ASTM D790 | |
| CMD | 139 (20.2) | ||||
| Moisure Absorption | 0.093 | - | % | 48/50 | IPC-TM-650 2.6.2.1 ASTM D570 |
| Thermal Conductivity | 0.45 | Z | W/mK | 50℃ | ASTM D5470 |
| Coefficient of Thermal Expansion | 15.9 14.4 35.2 | X Y Z | ppm/℃ | -50 ℃to 288℃ | IPC-TM-650 2.4.4.1 |
| Tg | >280 | ℃ | IPC-TM-650 2.4.24 | ||
| Td | 411 | ℃ | ASTM D3850 | ||
| Density | 1.58 | gm/cm3 | ASTM D792 | ||
| Copper Peel Stength | 4.1 | pli | 1oz,LoPro EDC | IPC-TM-650 2.4.8 | |
| Flammability | V-0 | UL 94 | |||
| Lead-free Process Compatible | Yes | ||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2003
Total Annual:
10 million-18 million
Employee Number:
350~450
Ecer Certification：
Verified Supplier
Company Profile Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millime... Company Profile Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millime...
Get in touch with us
Leave a Message, we will call you back quickly!