Shenzhen Fire Power Control Technology Co., LTD
| Payment Terms | T/T |
| Supply Ability | 200/month |
| Packaging Details | sponge/box |
| Gyro bias stability | 8°/h |
| gyro Repeatability | 15°/h |
| Daily start repeatability | 30°/h |
| Zero bias | 0.15°/s |
| accelerometer bias | 5mg |
| accelerometer scale factor | 3000 ppm |
| Power supply | 5±0.1 v |
| Brand Name | Firepower |
| Model Number | IMU200B |
| Certification | CE ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
ADIS16488 Replacement Imu Mems Sensor Optional Version
Stim300 IMU Accelerometer Gyro Sensor Factory Supply
Lightweight 6-axis Inertial Measurement Unit Accelerometer Gyroscope Sensor
Temperature Compensated IMU Accelerometer Gyro 16488-C 3 axis
Product Specification
| Payment Terms | T/T | Supply Ability | 200/month |
| Packaging Details | sponge/box | Gyro bias stability | 8°/h |
| gyro Repeatability | 15°/h | Daily start repeatability | 30°/h |
| Zero bias | 0.15°/s | accelerometer bias | 5mg |
| accelerometer scale factor | 3000 ppm | Power supply | 5±0.1 v |
| Brand Name | Firepower | Model Number | IMU200B |
| Certification | CE ROHS | Place of Origin | China |
| High Light | 3000 ppm Inertial Measurement Unit ，MEMS Gyroscope Inertial Measurement Unit ，Micromachining Technology IMU Accelerometer Gyro | ||
Inertial Measurement Unit (IMU) Based On Micromachining Technology (MEMS)
The IMU200B-IMU is an inertial measurement unit (IMU) based on micromachining technology (MEMS) with built-in high-performance MEMS gyroscope and MEMS accelerometer, which outputs 3 angular velocities and 3 accelerations.
|
|
Test conditions |
Typical value |
|
|||||
|---|---|---|---|---|---|---|---|---|
| Angular velocity |
|
|
|
|
|
|
||
| Zero bias | Stability | 10 s average, + 70 ℃, + 20 ℃, -40 ℃ |
|
|
|
|
||
| Allan variance, + 20 ℃ |
|
2.85 | 3.8 |
|
||||
| Repeatability of successive starts |
|
|
22.5 | 30 |
|
|||
| Daily start repeatability |
|
|
45 | 60 |
|
|||
| Monthly Start Repeatability |
|
|
90 | 120 |
|
|||
| Zero-bias total temperature variation | -40 ℃ ~ + 70 ℃, 1 ℃/min, 10 s average, 1σ |
|
0.03 | 0.04 |
|
|||
| Zero bias | Life-cycle change, accelerated testing |
|
0.225 | 0.3 |
|
|||
| Scale factor | Repeatability of successive starts |
|
|
150 | 200 |
|
||
| Daily start repeatability |
|
|
300 | 400 |
|
|||
| Monthly Start Repeatability |
|
|
600 | 800 |
|
|||
| Non-linearity |
|
|
300 | 400 |
|
|||
| Full temperature change |
|
|
600 | 800 |
|
|||
| Scale factor | Life-cycle change, accelerated testing |
|
4500 | 6000 |
|
|||
| Acceleration sensitive term |
|
|
|
|
||||
| Random walk |
|
|
|
°/√hr | ||||
| Noise density |
|
|
|
°/s/√Hz | ||||
| Bandwidth |
|
|
|
|||||
| Data delay | Excluding transmission time |
|
|
|||||
|
|
|
|
|
|
||||
| Zero bias | Stability | 10 s average, + 70 ℃, + 20 ℃, -40 ℃ |
|
|
||||
| Allan variance, + 20 ℃ |
|
|
||||||
| Repeatability of successive starts |
|
|
|
|||||
| Daily start repeatability |
|
|
|
|||||
| Monthly Start Repeatability |
|
|
|
|||||
| Zero-bias total temperature variation | -40 ℃ ~ + 70 ℃, 1 ℃/min variation |
|
|
|||||
| Zero bias | Life-cycle change, accelerated test instead |
|
|
|||||
| Scale factor | Repeatability of successive starts |
|
|
|
|
|||
| Daily start repeatability |
|
|
|
|
||||
| Monthly Start Repeatability |
|
|
|
|
||||
| Non-linearity |
|
|
|
|
||||
| Full temperature change |
After full temperature calibration and compensation, 1 ℃/min, 10 s average peak-peak value |
|
|
|
||||
| Scale factor | Life-cycle change, accelerated test instead |
|
|
|
||||
| Bandwidth |
|
|
|
|||||
| Data delay | Excluding transmission time |
|
|
|||||
| Start time | Time from power up to output valid data |
|
|
|||||
| Reset time | Time from reset to output valid data (hard reset) |
|
|
|||||
| Time from reset to output valid data (soft reset) |
|
|
||||||
|
3 gyro axes and 3 acceleration axes The degree of nonorthogonality between any two ax |
|
|
|
|||||
| Power supply |
|
|
||||||
| Power consumption |
|
|
||||||
| Communication update rate | 1-way RS422 |
200 (default) 500 (Max) |
|
|||||
| Communication baud rate | 1-way RS422 |
230.4 (default) 921.6 (Max) |
|
|||||
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2001
Total Annual:
10000000-15000000
Employee Number:
60~100
Ecer Certification：
Verified Supplier
Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is comp... Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is comp...
Get in touch with us
Leave a Message, we will call you back quickly!