Shenzhen Fire Power Control Technology Co., LTD
| Payment Terms | T/T |
| Supply Ability | 1000/month |
| Delivery Time | 1 week |
| Packaging Details | Box with sponge |
| Product name | Inertial measurement unit |
| Gryo range | ±500deg/s |
| Accelerometer measure range | 16g |
| Accelerometer allan variance | 0.02mg |
| Gryo allan variance | 0.6deg/h |
| MTBF | 20000h |
| Gyro scale factor nonlinearity | 0.02%FS |
| Vibration | 20~2000Hz |
| Brand Name | Firepower |
| Model Number | GI200H-A0 |
| Certification | CE ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
ADIS16488 Replacement Imu Mems Sensor Optional Version
Stim300 IMU Accelerometer Gyro Sensor Factory Supply
Lightweight 6-axis Inertial Measurement Unit Accelerometer Gyroscope Sensor
Temperature Compensated IMU Accelerometer Gyro 16488-C 3 axis
Product Specification
| Payment Terms | T/T | Supply Ability | 1000/month |
| Delivery Time | 1 week | Packaging Details | Box with sponge |
| Product name | Inertial measurement unit | Gryo range | ±500deg/s |
| Accelerometer measure range | 16g | Accelerometer allan variance | 0.02mg |
| Gryo allan variance | 0.6deg/h | MTBF | 20000h |
| Gyro scale factor nonlinearity | 0.02%FS | Vibration | 20~2000Hz |
| Brand Name | Firepower | Model Number | GI200H-A0 |
| Certification | CE ROHS | Place of Origin | China |
| High Light | 500deg/S Inertial Measurement Units ，High Precision Inertial Measurement Units ，Low bias Inertial Measurement Units | ||
Low bias IMU 500deg/S Range Inertial Measurement Units
Product Description
GI200H-A0-IMU is an inertial measurement unit (IMU) based on micro-mechanical technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations.
1)Three-axis digital gyroscope:
2)Triaxial digital accelerometer:
3)High reliability: MTBF > 20000h;
4)Guaranteed accuracy within the full temperature range (-40 ℃~ 70 ℃): built-in high-performance temperature calibration and compensation algorithm;
5)Suitable for working under strong vibration conditions;
6)Interface 1-channel RS42
| Parameter | Test conditions | Design accuracy | Unit | |
| Gyro | Dynamic measuring range | - | ±500 | º/s |
| Zero bias stability | Allan variance (500 °/s range, normal temperature) | 0.6 | º/h | |
| 10 s average (-40 ℃ ~ + 70 ℃, constant temperature), | 3 | º/h | ||
| Zero bias | Zero bias range | 0.1 | º/s | |
| Zero-bias variation over full temperature range | 0.03 | º/s | ||
| Start repeatability | 0.005 | º/s | ||
| Effect of linear acceleration on bias | 0.002 | º/s/g | ||
| Influence of vibration on zero bias, change before and after vibration | 0.003 | º/s/g | ||
| Influence of vibration on zero bias, change before and during vibration | 0.003 | º/s/g | ||
| Scale factor | Scale factor accuracy | 0.2 | % | |
| Scale factor nonlinearity | 0.02 | %FS | ||
| Bandwidth | - | 200 | Hz | |
| Accelerometer | Dynamic measuring range | - | 16 | g |
| Zero bias stability | Allan variance (16g range, normal temperature) | 0.02 | mg | |
| 10 s average (normal temperature, 1σ) | 0.1 | mg | ||
| Zero bias | Zero bias range | 1 | mg | |
| Zero bias variation over full temperature range | 1 | mg | ||
| Startup repeatability (1σ) | 0.2 | mg | ||
| Scale factor | Scale factor accuracy | 0.3 | % | |
| Scale factor nonlinearity | 0.02 | %FS | ||
| Bandwidth | - | 200 | Hz | |
| Communication interface | 1-channel SR422 | Baud rate | 460.8 | MHz |
| Sampling frequency | UART | 1000 | Hz | |
| Electrical characteristics | Voltage | - | 5±0.1 | V |
| Power consumption | - | ≤1.5 | W | |
| Ripple | P-P | 150 | mV | |
| Structural characteristics | Size | Tolerance ± 0.1 | 38.5×44.5×21.5 | mm |
| Weight | Potting/no potting | 70±2/45±2 | g | |
| Use environment | Operating temperature | - | -40~70 | ℃ |
| Storage temperature | - | -45~85 | ℃ | |
| Vibration | - | 20~2000Hz,6.06g | ||
| Impact | - | 6000g,0.5ms | ||
| Reliability | MTBF | - | 20000 | h |
| Continuous working time | - | 120 | h | |
L38.5mm x W44.5mm x H21.5mm(L x W x H)
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2001
Total Annual:
10000000-15000000
Employee Number:
60~100
Ecer Certification：
Verified Supplier
Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is comp... Shenzhen Fire Power Control Technology Co., Ltd. is a professional manufacturer specializing in the production of electronic products and inertial devices, and providing technical consultation and export services. The company has a strong independent team. The technical team is comp...
Get in touch with us
Leave a Message, we will call you back quickly!