Product Specification

18m³ Dongfeng Rear-Loader Garbage Compactor Truck

1. Product Overview

The 18m³ Dongfeng Rear-Loader Garbage Compactor Truck is designed for the collection and transportation of municipal household waste. The truck consists of a sealed garbage body, hydraulic system, loading and compression system, and electronic control system.

The fully enclosed compactor body provides automatic loading, waste compression and hydraulic discharge, while wastewater generated during the compression process is collected in a dedicated wastewater tank. This design helps reduce leakage and secondary pollution during waste transportation.

The truck can be equipped with either a rear bin-lifting mechanism or a rear hopper/tipping mechanism, according to the customer's waste collection requirements.

2. Main Features

• 18 m³ large-capacity compactor body
• Fully enclosed garbage container
• Hydraulic waste loading and compression system
• Automatic waste compression and discharge
• Integrated wastewater collection tank
• Reduced leakage and secondary pollution during transportation
• German Siem intelligent electronic control system
• Remote control operation from the driver's cab
• Imported hydraulic solenoid valves and key hydraulic components
• Durable cast components at key structural positions
• WISCO steel used for the compactor body
• Curved-frame body design for improved structural strength
• Optional rear loading systems for different garbage containers

3. Rear Loading Options

The rear section can be configured according to the customer's waste collection system:

Rear Bin-Lifting Mechanism

Suitable for lifting standard garbage bins with capacities of approximately 180–660 L.

Rear Hopper / Tipping Mechanism

Suitable for directly loading loose garbage into the compactor hopper.

The final loading mechanism can be customized according to the customer's local garbage collection method.

4. Compactor System

The compactor body mainly consists of:

• Garbage Compactor Body
• Wastewater Tank
• Loading / Filling Hopper
• Scraper Plate
• Sliding / Push Plate
• Multi-Way Hydraulic Control Valve
• Hydraulic System
• Garbage Bin Lifting Mechanism
• Rear Discharge System

During operation, garbage is loaded through the rear hopper and compressed by the hydraulic scraper and sliding plate. Wastewater produced during compression flows into the dedicated wastewater tank rather than leaking onto the road.

The hydraulic discharge system pushes the compressed waste out of the body at the disposal site.

5. Control & Hydraulic System

The truck is equipped with an intelligent electronic control system and hydraulic control system.

Key Features

• German Siem intelligent electronic control system
• Remote control operation from the driver's cab
• Imported hydraulic solenoid valves
• Separate mounting of the hydraulic valve assembly
• Simplified hydraulic piping
• Reduced number of hydraulic connections
• Cast components used at key structural positions

These features are intended to improve operating convenience, system reliability and serviceability.

6. Main Technical Specifications

Chengliwei CLW5251ZYSE6 Garbage Compactor Truck

* The source table contains several chassis configurations/options. The final value should be confirmed according to the actual selected chassis configuration.

7. Chassis Parameters

Dongfeng EQ1250GL6DJ Chassis

The manufacturer specifies that this garbage compactor is modified using a chassis with a 4,350 + 1,350 mm wheelbase for the listed configuration.

8. Engine Options

9. Manufacturer's Configuration & Service Information

The source manufacturer states that:

• The compactor body is manufactured using WISCO steel.
• The body adopts a curved-frame structural design.
• Hydraulic piping is designed to minimize unnecessary connections.
• Hydraulic valves are sourced from imported components.
• The hydraulic valve assembly is independently mounted on the body.
• The electronic control system uses German Siem control components.
• Remote operation from the driver's cab is available.
• The vehicle can be equipped with a satellite positioning-enabled driving recorder.
• The rear loading mechanism can be selected according to the customer's requirements.
• The rear protection structure has a ground clearance of approximately 400 mm.
• Side protective guards are welded to the vehicle.
• The rear protection structure is integrated with the special-purpose equipment.

After-Sales Service

The manufacturer states a service commitment of 1 year / 30,000 km. During this period, covered problems are handled free of charge through cooperating service stations. After the warranty period, the customer is charged for replacement parts.