Round Hole 0.5mm Decorative Stainless Steel Mesh Ventilation Heat Dissipation

Product Specification

Stainless Steel Round Hole Ventilation And Heat Dissipation Sieve Plate Metal Decorative Mesh

1. Product Introduction

 The rhombus net is made by crocheting, and its processing and manufacturing process is relatively simple. Moreover, the diamond-shaped net is a kind of mesh with relatively uniform meshes and a fairly flat surface, and the first impression of the diamond-shaped net is that it is beautiful and generous.

2. Parameter table

3. Product application

  It conforms to the specifications of fixed platforms, walkways and stairs stipulated by British Standards. It is the most ideal product in occasions with small spans. It is no exception even under the load of transportation equipment aisles. It can also be used as warehouse racks, Panels of pavilions, trestle bridges, protective fences, sun curtains, etc.

4. Product advantages

   Good manufacturability; the aluminum plate punching net can be processed into various complex geometric shapes such as plane, arc and spherical surface by adopting the process of processing first and then spraying paint.

5. Production process

  We can use a leveling machine to restore the punched and deformed punching plate to its original flat state. Steel plates with a thickness of 0.8mm-12mm can be leveled. And cleaning the punching hole requires the use of lubricant, but we also have a degreasing process to remove traces on its surface and make the orifice plate look clean. Forming and deep processing In addition to customer reservations, we can also provide a series of follow-up processing for stainless steel punching mesh, including: leveling, cutting, labeling, packaging, degreasing, deburring, forming, annealing, painting, electroplating, welding , Polishing, bending, rolling, etc.

6. Installation method

 Install directly with screws through the mounting holes, punch mounting holes around the punching net and stainless steel punching plate, and fix it directly later. Through bending, it can be stuck on the equipment that needs to be installed. The bending can not only enhance the strength of the board, but also facilitate the installation. Through the welding process, the punching plate is directly welded to the bracket, and the eye is sprayed with plastic. In this case, the front view is very beautiful.

7. Matters Needing Attention

 During the cleaning process, especially when cleaning the perforated net products with extremely thin sheets, be careful not to damage the perforated net plates to avoid distortion of the perforated net plates.

8. Packing method

 In order to prevent the problems of drop, friction and scratch in the process of placing the stainless steel punching plate, the following points should be paid attention to when transporting and packing the stainless steel punching plate: the lower part of the packing of the stainless steel punching plate (also called the steel grating plate) is padded with wooden square, for easy loading and unloading of forklift trucks, the stainless steel piercing plate for export must be fastened with twisted square steel and fasteners. Because the square steel has the risk of spreading insect diseases, it must abide by the laws and regulations of the destination country. Channel Steel or plywood can be used instead of square steel, both the supplier and the demander agree that the bottom of the package should be used as the lifting position instead of the twisted square steel or flat steel of the stainless steel punching plate.