Shanghai Bestcomp Compressor Co., Ltd
| Payment Terms | TT/LC |
| Supply Ability | 2,000-3,000 per month |
| Delivery Time | 3-30 days |
| Packaging Details | According to international standards |
| Condition | New Screw Air Compressor |
| Noise | 78dB |
| Cooling | Air or Water Cooled |
| Power Supply | 220/380/415//440V 50/60Hz 3Ph |
| Size | 1540*920*1240mm |
| Cooling Method | Air or Water Cooled |
| Colour | Blue |
| Transmission Mode | direct driven |
| Cooling Model | Air cooling |
| Power Rating | 7.5 KW To 400 KW |
| Advanced Design | Design in Germany |
| Start | Delta Start |
| Driving System | protection system |
| Inlet Pressure | Atmospheric Pressure |
| Brand Name | AIRERA |
| Model Number | AGCD-30D C VP |
| Certification | ISO、CE、TUV |
| Place of Origin | made in China |
View Detail Information
Explore similar products
Product Specification
| Payment Terms | TT/LC | Supply Ability | 2,000-3,000 per month |
| Delivery Time | 3-30 days | Packaging Details | According to international standards |
| Condition | New Screw Air Compressor | Noise | 78dB |
| Cooling | Air or Water Cooled | Power Supply | 220/380/415//440V 50/60Hz 3Ph |
| Size | 1540*920*1240mm | Cooling Method | Air or Water Cooled |
| Colour | Blue | Transmission Mode | direct driven |
| Cooling Model | Air cooling | Power Rating | 7.5 KW To 400 KW |
| Advanced Design | Design in Germany | Start | Delta Start |
| Driving System | protection system | Inlet Pressure | Atmospheric Pressure |
| Brand Name | AIRERA | Model Number | AGCD-30D C VP |
| Certification | ISO、CE、TUV | Place of Origin | made in China |
| High Light | 30kW Energy Efficient Screw Air Compressor ，Screw Air Compressor Industrial 380V ，Screw Air Compressor Industrial 415V | ||
Why our AGCD high efficient screw compressor?
1, Coupling connected air screw compressor with less noise and higher efficiency,
2, Best balance of quality &prices in selection of main parts
3, Upgraded Air end with SKF 6 bearings
4, ISO, TUV, GB, SGS certificates performance guaranteed
5, Special design for mid-east working environment
1 Drives and electrics
The almost loss-free power transmission
guarantees reliable, high-performance compressor operation. The
regular maintenance requirement is reduced to lubrication of the
motor. All the electronic components are brand products of leading
manufacturers. r
ives and electrics
2 Air end block – reliable centrepiece – Design in Germany
The centrepiece of the compressor is the air end, which is constructed
and manufactured with the most modern production methods in
Germany. The optimal air end for your compressor can be used on a
modulating basis. In frequency-controlled units, where the operating
pressure changes, adjustments can also be made on the frequency
controller to optimally adjust the speed of the compressor to the
compressor performance.
3 Electric motor
Only electric motors from well-known manufacturers of protection
class IP55/IE3&4 are used. As a standard, the drive motors are monitored both
thermally (via the thermistor of the motor) as well as electronically
(overload protection via the frequency inverter).
4 Oil separation system
Compressors up to 132 kW are equipped with external separators
that can be changed in a simple spin-off/spin-on process. Larger
units have an internal separator cartridge. Due to the excellent
separation efficiency of the system as a whole, the compressors can
be used in the pressure range of 5.0 to 15.0 bar. Special pressures
on request.
5 Oil circuit
The amount of oil in the units is determined in such a way as to
extend the oil change intervals (depending on ambient conditions).
An oil level sensor is integrated as standard and is read by the
controller. All the units in this series have a horizontal oil separation
vessel in which the oil is separated from the compressed air highly
efficiently at low speeds.
Frequency inverters (optional)
The frequency converter minimises idle times and optimises supply
with fluctuating compressed air requirements. Start-up peaks are
avoided and the compressor’s delivery rate is controlled continuously
– that saves electricity costs! The total costs for your compressed air
supply are significantly reduced and investment costs are amortised
in the shortest possible time.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
1981
Total Annual:
13200000-15000000
Employee Number:
115~1040
Ecer Certification：
Verified Supplier
Since 1981, Airera has been dedicated to the development & production of compressors for over 4 decades, it has overseas R&D centers and provincial enterprise technology centers, 106 R&D technicians, 12 third-generation Rotorcomp patented lines, and cooperates with German Rotorcomp and A... Since 1981, Airera has been dedicated to the development & production of compressors for over 4 decades, it has overseas R&D centers and provincial enterprise technology centers, 106 R&D technicians, 12 third-generation Rotorcomp patented lines, and cooperates with German Rotorcomp and A...
Get in touch with us
Leave a Message, we will call you back quickly!