Suzhou Zhemu Industrial Equipment Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 5000kg per Week |
| Delivery Time | 25-35 days |
| Packaging Details | Plywood Box |
| Name | MONEL K500 UNS N05500 Alloy K500 NiCu30Al Nickel Copper Alloy 500 Round Bar |
| Grade | Nickel |
| Ni (Min) | 63 |
| SIZE | Customized Size |
| Brand Name | ZHEMU |
| Model Number | N05500 |
| Certification | ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Monel 400 Rod Monel Alloy 400 UNS N04400 Monel Nickel Alloy Black Bar Flat Bar
High Mechanical Strength DIN 2.4375 UNS N05500 Nickel Alloy Monel K500 Plate
Corrosion Resistant 2.4375 Nickel Alloy Ni201 Ni200 Monel K500 Uns N05500 Monel
Hastelloy 1000 Nickel Base Alloy Sheet Uns N05500 K500 B865 2.4375 Nicu30al
Product Specification
| Payment Terms | T/T | Supply Ability | 5000kg per Week |
| Delivery Time | 25-35 days | Packaging Details | Plywood Box |
| Name | MONEL K500 UNS N05500 Alloy K500 NiCu30Al Nickel Copper Alloy 500 Round Bar | Grade | Nickel |
| Ni (Min) | 63 | SIZE | Customized Size |
| Brand Name | ZHEMU | Model Number | N05500 |
| Certification | ISO | Place of Origin | CHINA |
| High Light | Alloy K500 NiCu30Al ，Monel K 500 ，UNS N05500 NiCu30Al | ||
MONEL K500 UNS N05500 Alloy K500 NiCu30Al Nickel Copper Alloy 500 Round Bar
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging.
When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.
In what forms is Monel K500 Available at Mega Mex?
Bar
Rod
Corrosion Resistant Monel K-500
The corrosion resistance of alloy K-500 is substantially equivalent to that of alloy 400 except that when in the age-hardened condition, nickel alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel K-500 has been found to be resistant to a sour-gas environment. The combination of very low corrosion rates in high-velocity sear water and high strength make alloy K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.
What are the characteristics of Monel K500?
Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
Excellent resistance to high velocity sea water
Resistant to a sour-gas environment
Excellent mechanical properties from sub-zero temperatures up to about 480C
Non-magnetic alloy
|
item
|
value
|
|
Place of Origin
|
China
|
|
|
Shandong
|
|
Brand Name
|
LCKC
|
|
Application
|
Other
|
|
Alloy Or Not
|
Is Alloy
|
|
Section Shape
|
Round
|
|
|
21mm - 60mm
|
|
Special Pipe
|
Other
|
|
Standard
|
ASTM
|
|
Certificate
|
ISO9001
|
|
Grade
|
nickel-based alloy
|
|
Surface Treatment
|
Hot Rolled/Cold Rolled
|
|
Tolerance
|
±1%
|
|
Processing Service
|
Welding, Punching, Cutting, Bending
|
|
Oiled or Non-oiled
|
Slightly Oiled
|
|
Delivery Time
|
15-21
|
|
Material
|
nickel-based alloy
|
|
Product name
|
nickel-based alloy round steel
|
|
MOQ
|
1 Ton
|
|
Size
|
Customized Size
|
|
Quality
|
High Quaity
|
|
monel k 500chemical component
|
||||||||
|
Ni
|
Cu
|
Al
|
Ti
|
Fe
|
Mn
|
C
|
Si
|
S
|
|
63.0-70.0%
|
27.0-33.0%
|
2.30-3.15%
|
0.35-0.85%
|
2.00%
|
1.50%
|
0.25%
|
0.50%
|
0.010%
|
|
Physical properties of Monel K500
|
|
|
density
|
melting point
|
|
8.05g/cm3
|
1288-1343 ℃
|
|
Monel k500 mechanical property
|
||
|
strength of extension
|
yield strength
|
ductility
|
|
1100
|
790
|
20
|
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
2005
Employee Number:
>100
Ecer Certification：
Verified Supplier
Suzhou Zhemu Material Co., Ltd (refered as Zhemu afterwards) is a professional supplier of high performance alloys. Our factory is specialized in suppling Nickel alloys , Hastelloy Alloy, Incoloy Alloy, Monel Alloy, Duplex Stainless Steel, Titanium Alloy, Zirconium Alloy, Copper Alloy and other spec... Suzhou Zhemu Material Co., Ltd (refered as Zhemu afterwards) is a professional supplier of high performance alloys. Our factory is specialized in suppling Nickel alloys , Hastelloy Alloy, Incoloy Alloy, Monel Alloy, Duplex Stainless Steel, Titanium Alloy, Zirconium Alloy, Copper Alloy and other spec...
Get in touch with us
Leave a Message, we will call you back quickly!