Shanghai Tankii Alloy Material Co.,Ltd
| Payment Terms | L/C, T/T, Western Union, Paypal |
| Supply Ability | 2000+TON+YEAR |
| Delivery Time | 7-12 DAYS |
| Packaging Details | spool, coil, carton or plywood case with plastic film according to clients' requirements |
| Surface | Clean without spots Bright |
| Composition | Copper Nickel Manganese |
| Sample free | Available |
| Other Grades Provided | CuNi19, CuNi23, CuNi40, CuNi30 |
| Size | 0.01*3-0.3*600 |
| Colour | Silver white |
| Brand Name | TANKII |
| Model Number | CUNI44 |
| Certification | ISO9001:2008/ ROHS |
| Place of Origin | Shanghai, China |
View Detail Information
Explore similar products
Dumet Wire 0.35mm Red Color Filament Used As Sealing Material For All Kinds Of
Dia 1.2mm Aluminum Magnesium Alloy Extruding Welding Wire Az31 Az61 Az91
ROHS Standard Precision Alloys FeNi48/50 SUPRA 50 / 50T / 50SP Sheet For
Kovar / Nilo K Expansion Precision Alloy Ribbon For Glass Sealing
Product Specification
| Payment Terms | L/C, T/T, Western Union, Paypal | Supply Ability | 2000+TON+YEAR |
| Delivery Time | 7-12 DAYS | Packaging Details | spool, coil, carton or plywood case with plastic film according to clients' requirements |
| Surface | Clean without spots Bright | Composition | Copper Nickel Manganese |
| Sample free | Available | Other Grades Provided | CuNi19, CuNi23, CuNi40, CuNi30 |
| Size | 0.01*3-0.3*600 | Colour | Silver white |
| Brand Name | TANKII | Model Number | CUNI44 |
| Certification | ISO9001:2008/ ROHS | Place of Origin | Shanghai, China |
| High Light | soft magnetic alloy ，precision tubing | ||
0.6mm Thick CuNi44 Constantan/ Konstantan Strip/ Foil/ Sheet Cupronickel Precision Strip
Constantan is a copper-nickel alloy usually consisting of 55% Copper and 45% Nickel. Its main feature is its resistance which is constant over a wide range of temperatures. Other alloys with similarly low temperature coefficients are known, such as Manganin (Cu86Mn12Ni2).
Of all modern strain gauge alloys, Constantan is the oldest, and still the most widely used. This situation reflects the fact that constantan has the best overall combination of properties needed for many strain gauge applications. This alloy has, for example, an adequately high strain sensitivity, or gauge factor, which is relatively insensitive to strain level and temperature. Its resistivity is high enough to achieve suitable resistance values in even very small grids, and its temperature coefficient of resistance is not excessive. In addition, constantan is characterized by good fatigue life and relatively high elongation capability. It must be noted, however, that constantan tends to exhibit a continuous drift at temperatures above 65 °C (150 °F); and this characteristic should be taken into account when zero stability of the strain gauge is critical over a period of hours or days.
a) Ni= 44%, Mn= 1.5%, Fe= 0.5% , Cu= Balance
b) A-Alloy: Very importantly, constantan can be processed for self-temperature compensation to match a wide range of test material coefficients of thermal expansion. An alloy is supplied in self-temperature-compensation (S-T-C) numbers 00, 03, 05, 06, 09, 13, 15, 18, 30, 40 and 50, for use on test materials with corresponding thermal expansion coefficients, expressed in parts per million by length (or µm/m) per kelvin or degree Celsius or degree Fahrenheit.
c) P-alloy: For the measurement of very large strains, 5% (50 000 microstrain) or above, annealed constantan (P alloy) is the grid material normally selected. Constantan in this form is very ductile; and, in gauge lengths of 0.125 in (3 mm) and longer, can be strained to >20%. It should be borne in mind, however, that under high cyclic strains the P alloy will exhibit some permanent resistance change with each cycle, and cause a corresponding zero shift in the strain gauge. Because of this characteristic, and the tendency for premature grid failure with repeated straining, P alloy is not ordinarily recommended for cyclic strain applications. P alloy is available with S-T-C numbers of 08 and 40 for use on metals and plastics, respectively.
| Cu | CuNi2 | CuNi6 | CuNi10 | CuNi23Mn | CuNi44 | ||
| Tensile strength | [N/mm²] | 220-300 | 260-360 | 270-370 | 300-390 | 500-550 | 560-680 |
| Yield strength at 1% elongation | [N/mm²] | 120-200 | 140-240 | 160-220 | 140-250 | 200-330 | 400-500 |
| Bending proof performance | [%] | 100 | 160 | 760 | |||
| Resistance (IACS) | [%] | 101 | 34 | 17 | 12 | 6 | 3 |
| Conductivity | [S*m/mm²] | 58.5 | 20.0 | 10.0 | 6.7 | 3.33 | 2.0 |
| Resistivity | [Ohm*mm²/m] | 0.0171 | 0.05 | 0.10 | 0.1493 | 0.30 | 0.50 |
| Thermal coefficient of resistance | [1E-6/K] | 3900-4300 | 1100-1600 | 500-900 | 350-400 | 150-200 | -80 - +40 |
| Solderability | [-] | good | good | good | good | good | no conventional soldering |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1981
Total Annual:
8000000-100000000
Employee Number:
90~100
Ecer Certification：
Verified Supplier
Shanghai Tankii Alloy Material Co., Ltd.specialized in production of Resistance Heating Alloy, Nickel Chromium Alloy, Iron Chromium Aluminum Alloy, Nickel Aluminum Alloy, Manganin, Copper Nickel Alloy, thermocouple wire, pure nickel and other precision alloy materials in the form of round wire, ribb... Shanghai Tankii Alloy Material Co., Ltd.specialized in production of Resistance Heating Alloy, Nickel Chromium Alloy, Iron Chromium Aluminum Alloy, Nickel Aluminum Alloy, Manganin, Copper Nickel Alloy, thermocouple wire, pure nickel and other precision alloy materials in the form of round wire, ribb...
Get in touch with us
Leave a Message, we will call you back quickly!