Shanghai Tankii Alloy Material Co.,Ltd
| Payment Terms | L/C, T/T, Western Union |
| Delivery Time | 7-15days |
| Packaging Details | Wooden Case |
| Material | Nickel -Copper - Iron - Manganin Alloy |
| Density | 8.83g/cm3 |
| Width | 1-400mm |
| thickness | 0.02-2.5mm |
| Standard | ASTM,DIN,GB |
| Shape | Strip, wire, plate, pipe |
| Brand Name | TANKII |
| Model Number | Monel 400 |
| Certification | SGS ISO |
| Place of Origin | Shanghai China |
View Detail Information
Explore similar products
White Colour Al2O3 Porous Alumina Tube Wear Resisting High Insulation
Inconel 601 High Temp Alloy Corrosion Resistant Ncf601 Round Bar Bright Surface
Ni29co18/ Uns K94610 (4J29) Kovar Expansion Precision Alloy Pipe / Tube
Resistohm 80 Ni80cr20 High Temp Alloy For Electric Heating Elements
Product Specification
| Payment Terms | L/C, T/T, Western Union | Delivery Time | 7-15days |
| Packaging Details | Wooden Case | Material | Nickel -Copper - Iron - Manganin Alloy |
| Density | 8.83g/cm3 | Width | 1-400mm |
| thickness | 0.02-2.5mm | Standard | ASTM,DIN,GB |
| Shape | Strip, wire, plate, pipe | Brand Name | TANKII |
| Model Number | Monel 400 | Certification | SGS ISO |
| Place of Origin | Shanghai China | ||
| High Light | high temperature wire ，high temperature metal alloys | ||
UNS N04400 Monel 400 Nickel Copper Alloy Strip Used for Corrosion Resistance
Monel 400(UNS N04400/2.4360) is a nickel-copper alloy with high strength and excellent resistance to a range of media including seawater, dilute hydrofluoric and sulfuric acids, and alkalies.
Monel 400 containing about 30–33% copper in a nickel matrix has many similar characteristics of commercially pure nickel, while improving upon many others. Addition of some iron significantly improves the resistance to cavitation and erosion in condenser tube applications. The main uses of Monel 400 are under conditions of high flow velocity and erosion as in propeller shafts, propellers, pump-impeller blades, casings, condenser tubes, and heat exchanger tubes. Corrosion rate in moving seawater is generally less than 0.025 mm/year. The alloy can pit in stagnant seawater, however, the rate of attack is considerably less than in commercially pure alloy 200. Due to its high nickel content (approx. 65%) the alloy is generally immune to chloride stress corrosion cracking. The general corrosion resistance of Monel 400 in nonoxidizing mineral acids is better compared to nickel. However, it suffers from the same weakness of exhibiting very poor corrosion resistance to oxidizing media such as nitric acid, ferric chloride, cupric chloride, wet chlorine, chromic acid, sulfur dioxide, or ammonia. In unaerated dilute hydrochloric and sulfuric acid solution the alloy has useful resistance up to concentrations of 15% at room temperature and up to 2% at somewhat higher temperature, not exceeding 50°C. Due to this specific characteristic, Monel 400 produced by NiWire is also used in processes where chlorinated solvents may form hydrochloric acid due to hydrolysis, which would cause failure in standard stainless steel.
Monel 400 possesses good corrosion resistance at ambient temperatures to all HF concentration in the absence of air. Aerated solutions and higher temperature increase the corrosion rate. The alloy is susceptible to stress corrosion cracking in moist aerated hydrofluoric or hydrofluorosilic acid vapor. This can be minimized by deaeration of the environments or by stress relieving anneal of the component in question.
Typical applications are valve and pump parts, propeller shafts, marine fixtures and fasteners, electronic components, chemical processing equipment, gasoline and freshwater tanks, petroleum processing equipment, boiler feedwater heaters and other heat exchangers
Chemical Composition
| Grade | Ni% | Cu% | Fe% | C% | Mn% | C% | Si% | S% |
| Monel 400 | Min 63 | 28-34 | Max 2.5 | Max 0.3 | Max 2.0 | Max 0.05 | Max 0.5 | Max 0.024 |
Specifications
| Grade | UNS | Werkstoff Nr. |
| Monel 400 | N04400 | 2.4360 |
Physical Properties
| Grade | Density | Melting Point |
| Monel 400 | 8.83 g/cm3 | 1300°C-1390°C |
Mechanical Properties
| Alloy | Tensile Strength | Yield Strength | Elongation |
| Monel 400 | 480 N/mm² | 170 N/mm² | 35% |
Our Production Standard
| Standard | Bar | Forging | Pipe/Tube | Sheet/Strip | Wire | Fittings |
| ASTM | ASTM B164 | ASTM B564 | ASTM B165/730 | ASTM B127 | ASTM B164 | ASTM B366 |
Size Range
Monel 400 wire, bar, rod, strip, forging, plate, sheet, tube, fastener and other standard forms are available.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1981
Total Annual:
8000000-100000000
Employee Number:
90~100
Ecer Certification：
Verified Supplier
Shanghai Tankii Alloy Material Co., Ltd.specialized in production of Resistance Heating Alloy, Nickel Chromium Alloy, Iron Chromium Aluminum Alloy, Nickel Aluminum Alloy, Manganin, Copper Nickel Alloy, thermocouple wire, pure nickel and other precision alloy materials in the form of round wire, ribb... Shanghai Tankii Alloy Material Co., Ltd.specialized in production of Resistance Heating Alloy, Nickel Chromium Alloy, Iron Chromium Aluminum Alloy, Nickel Aluminum Alloy, Manganin, Copper Nickel Alloy, thermocouple wire, pure nickel and other precision alloy materials in the form of round wire, ribb...
Get in touch with us
Leave a Message, we will call you back quickly!