High Hardness Wood Finish Aluminium Profiles Corrosion Resistance For Doors /

Product Specification

Aluminium doors and windows accessories , wood finished aluminum frames

Specifiaction:

Wood grained

    New technology in finishing to form a texture look like real wood. Handtouch or film transfering are both available

1: Wood grain thermal transfer paper, PET thermal transfer film are implemented by using the principle of heat sublimation and penetration of transfer printing decoration, transfer printing process is: the selected base material to use wood grain thermal transfer paper or PET wrapped in tight base material to heat transfer printing, thermal transfer membrane to inspection, packaging and cleaning on the surface.

2: Base material: the base material must be the high temperature resistant plastic material, or the substrate material, such as painting, baking paint, electrophoresis, etc., the substrate material should be suitable for the transfer of the material.

3: This is a description of the process of transfer printing of wood grain heat transfer paper and PET heat transfer film.

4: Transfer printing paper with wood grain heat transfer paper

5: Process 1: apply heat transfer glue to paste the transfer, apply to the first step of large or foreign material: select the base material that has been sprayed or electrophorated.

Step 2: use thermal transfer glue, wood grain positive thermal transfer paper and transfer printing substrate have been transfer to face (the selecting of the manual brushing glue, sticker manual operation mode, or choose the universal wheel brush glue coating machine, sticker machine operation), using thermal transfer glue is designed to make wood grain thermal transfer paper can be transfer to be heat transfer surface of base material.

Step 3: wrap has good base material sent to the oven to bake, the length of the baking temperature and time should be according to the characteristics of the transfer printing substrate, to transfer the texture depth and comprehensive factors such as specific performance of oven do appropriate adjustments, usually transfer printing temperature is 160 ~ 180 ℃, time is 5 ~ 8 minutes. Step 4: remove the material from the oven, remove the heat transfer paper and make the surface clean.

6: Process two: apply to the first step of large scale or foreign base material: select the base material that has been sprayed or electrophoresis.

Step 2: use a wood print heat transfer paper to cover the base material that is reprinted and hold the paper's interface with the high temperature adhesive paper, in case the wood print heat transfer paper is released. (note: the front of the wood print heat transfer paper should be reprinted with the reprinted substrate.)

Step 3: in has wrapped in wood grain thermal transfer paper base material are last live high temperature resistance and good sealing tube plastic bag, and then from the two ends of the plastic bag, vacuum until the plastic bag can be fully and effectively close to the base material. The negative pressure size of the vacuum should be adjusted according to the characteristics of the reprinted substrate and the negative pressure of the plastic bag, usually between 0.3 and 0.8 Mpa. (note: use the plastic bag is the purpose of through negative pressure is close to the base material of the plastic bag forced grain thermal transfer paper can fully and effectively in the substrate.)

Step 4: wrap has good base material sent to the oven to bake, the length of the baking temperature and time should be according to the characteristics of the transfer printing substrate, to transfer the texture depth and comprehensive factors such as specific performance of oven do appropriate adjustments, usually transfer printing temperature is 160 ~ 180 ℃, time is 5 ~ 8 minutes.

Step 5: has been out of the oven transfer printing substrate, from one end of the transfer printing substrate to pull off the plastic bag (note: this plastic bag can be benefited to reuse), tear off thermal transfer paper, do the surface clean.

7: Process 3: suitable for the first step of flat surface substrate: select the material that has been sprayed or electrophorated. Step 2: it is facing the shop facing the front of the printing paper. Step 3: pressure, heating plate heat transfer machine, usually transfer printing temperature is 160 ~ 180 ℃, time of 18 ~ 25 seconds. Step 4: tear down the heat transfer paper.

Corporate Introduction :

Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hongying" brand. Strong comprehensive strength and excellent service make Yong long "Hongying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.

The company has 900 employees, including 120 high and intermediate engineering technology and management personnel, with advanced and perfect design, production, testing and testing methods as well as perfect sales network and after-sales service system. The products sell well in more than 10 national and foreign ports, Australia and Taiwan areas.

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.

Welcome to visit our company !

Choose us & contact us !