| Polishing Type | Mechanical Polishing, Chemical Polishing |
| Materialcompatibility | Aluminum and Aluminum Alloys |
| Proflie Type | Industrial Aluminum Profile |
| Mode Type | Semi automatic |
| Delivery Time | 60-90 days |
| Environmentalprotection | Wastewater Treatment System Included |
| Payment Terms | L/C,T/T |
| Coloring Rectifier | 2 sets |
| Packaging Details | Standard Packaging |
| Dying Color | black, brown... |
| Dimention | Customizied |
| Product name | Hardcoat Production Line |
| Model Number | MEI-AL-EE405 |
| Brand Name | MEI-AL |
| Place of Origin | Foshan, China |
View Detail Information
Explore similar products
Horizontal Anodizing Production Line 6500mm Max Profile Length
1000 Ton Manual Anodizing Production Line 10µM - 12µM Micron
150 Ton Anodizing Production Line Aluminum Alloy Horizontal Mode
Horizontal Anodizing Line Construction Automatic Operation Style
Product Specification
| Polishing Type | Mechanical Polishing, Chemical Polishing | Materialcompatibility | Aluminum and Aluminum Alloys |
| Proflie Type | Industrial Aluminum Profile | Mode Type | Semi automatic |
| Delivery Time | 60-90 days | Environmentalprotection | Wastewater Treatment System Included |
| Payment Terms | L/C,T/T | Coloring Rectifier | 2 sets |
| Packaging Details | Standard Packaging | Dying Color | black, brown... |
| Dimention | Customizied | Product name | Hardcoat Production Line |
| Model Number | MEI-AL-EE405 | Brand Name | MEI-AL |
| Place of Origin | Foshan, China | ||
| High Light | 20–80 μm Film Thickness Hard Anodizing Line ,HV 400–600 Surface Hardness Hard Anodizing Line ,Wastewater Treatment System Included Hard Anodizing Line | ||
This hard anodizing line is engineered for industrial aluminum components requiring a thick, wear-resistant Type III hard coat. Utilizing low-temperature sulfuric acid electrolyte controlled at 0–5°C, the process operates with higher voltage and current density than Type II decorative anodizing.
The system produces film thickness ranging from 20–80 μm, with configurations available for up to 100 μm. Surface hardness typically reaches HV 400–600. Ideal for hydraulic pistons, gears, mold parts, wear-resistant components, military structural parts, and other industrial applications demanding high hardness and wear resistance.
Due to distinct electrolyte and process conditions, this hard anodizing line requires dedicated high-voltage rectifiers, high-capacity low-temperature chillers, and separate process tanks. Hard anodized parts typically exhibit natural black or gray appearance rather than decorative coloring. Production capacity is customized based on part size, racking method, film thickness, and cycle time requirements.
| Parameter | Specification |
|---|---|
| Applicable Workpieces | Hydraulic pistons, gears, mold parts, wear-resistant components, military structural components, industrial aluminum components |
| Operation Mode | Automatic / semi-automatic / manual, project-specific |
| Anodizing Type | Type III hard anodizing, low-temperature sulfuric acid |
| Electrolyte | Low-temperature sulfuric acid |
| Film Thickness | 20–80 μm; up to 100 μm in specific configurations |
| Surface Hardness | Typically HV 400–600 |
| Process Temperature | 0–5°C, controlled by low-temperature chiller |
| Voltage Range | 30–80 V DC |
| Rectifier Power Supply | Dedicated high-voltage rectifier / high-current rectifier, model dependent |
| Cooling | High-capacity low-temperature chiller; cooling load is higher than Type II anodizing |
| Tanks | Separate process tanks; cannot share electrolyte with Type II sulfuric acid anodizing |
| Coloring | Generally not dyed; natural black or gray appearance is common |
| Sealing | Potassium dichromate sealing / low-temperature sealing, configurable according to environmental requirements |
| Filtration | Micron PP filter |
| Exhaust | Acid fume treatment |
| Control System | PLC control, recipe storage, temperature control, manual override |
| Wastewater Treatment | Acid / nickel-containing wastewater treatment, project-specific |
| Production Capacity | Project-specific; determined by part size, racking density, tank size and cycle time |
A: Type II is a decorative sulfuric acid anodizing process, typically 8–15 μm. Type III is hard anodizing, typically 20–80 μm, with higher hardness and wear resistance.
A: 20–80 μm is typical, with up to 100 μm available in specific configurations.
A: Hard anodizing typically uses low-temperature sulfuric acid at 0–5°C, controlled by a high-capacity chiller.
A: Hard anodized parts are generally not dyed in the same way as decorative anodizing. Natural black or gray appearance is common.
A: No. Hard anodizing requires separate process tanks and cannot share electrolyte with Type II sulfuric acid anodizing.
A: Potassium dichromate sealing or low-temperature sealing can be configured according to environmental requirements.
Get a customized hard anodizing line layout and process solution based on part size, racking method, film thickness, hardness requirements, capacity and factory conditions. Our engineering team can configure the operation mode, tank layout, high-voltage rectifier, low-temperature chiller, filtration, exhaust and wastewater treatment accordingly.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
430000-10000000
Employee Number:
50~90
Ecer Certification:
Verified Supplier
Guangdong MEI-AL Technology | Leading Anodizing Line Manufacturer Since 2011 MEI-AL Technology has been committed to serve the aluminum profile surface treatment industry with its strong technical force, excellent production and processing, scientific management methods and excellent m... Guangdong MEI-AL Technology | Leading Anodizing Line Manufacturer Since 2011 MEI-AL Technology has been committed to serve the aluminum profile surface treatment industry with its strong technical force, excellent production and processing, scientific management methods and excellent m...
Get in touch with us
Leave a Message, we will call you back quickly!