Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd
| Supply Ability | 1000tons/month |
| Packaging Details | 25kg/carton |
| Raw materials | Epoxy resin |
| color | ral colors |
| application | used for rebar to anticorrosive |
| Application Method | Electrostatic spray |
| Gloss | high/Low/Matt |
| state | powder coating |
| Brand Name | Greentech |
| Model Number | no |
| Certification | no |
| Place of Origin | Tianjin,China |
View Detail Information
Explore similar products
Solid Epoxy Powder Coating For Coal Mine Pipe Good Mechanical Performance
RAL 9005 Satin Black Epoxy Coating Wrinke Finish Excellent Leveling / Gloss
Special Powder Epoxy Coating , Low Melting Temperature Heat Proof Powder Coating
Rebar Steel Epoxy Powder Coating Average Grain Diameter 30µM - 50µM
Product Specification
| Supply Ability | 1000tons/month | Packaging Details | 25kg/carton |
| Raw materials | Epoxy resin | color | ral colors |
| application | used for rebar to anticorrosive | Application Method | Electrostatic spray |
| Gloss | high/Low/Matt | state | powder coating |
| Brand Name | Greentech | Model Number | no |
| Certification | no | Place of Origin | Tianjin,China |
| High Light | complete powder coating ，epoxy resin powder coating | ||
Introduction: a thermosetting epoxy modified heavy-duty powder coatings specially designed for epoxy anti-corrosion coating steel, this product adopts imported two step method special epoxy, part functional epoxy, match up dedicated anticorrosive epoxy firming agent, unique compound design and practical by the authoritative department detection, has good reactivity, strong adhesion strength, good toughness and bending resistance, excellent chemical resistance, solvent resistance, cathodic disbonding resistance, impact resistance and other properties.
Feature:
6. Low melting temperature, high reactivity, high curing completion rate, good mechanical properties
7. Versatility, low powder consumption
8. Steel wire drawing in the powder coating can be reduced or avoided
Power Specification
| Test Items | Technical Indicators | Test Method | |
| Appearance | Even color, no caking | visual | |
| Colour | As customer required | visual | |
| density(g/cm³) | 1.2-1.5 | GB/T 4472 | |
| average grain diameter | 30µｍ-50µｍ | Laser laser particle size analyzer | |
| Particle size distribution % | 150μm Sieve the powder | ≤3.0 | GB/T 6554 |
| 250μm Sieve the powder | ≤0.2 | ||
| volatile matter content (%) | ≤ 0.6 | GB/T 6554 | |
| magnetic material content(%) | ≤ 0.002 | GB/T 2482-86 | |
| Gel time(s) | 200℃ ≤ 20S | GB/T 6554 | |
| Curing time(s) | 230℃ ≤ 60S | GB/T 6554 | |
Coating Specification
| Test Items | Technical Indicators | Test Method |
| Appearance | smooth,uniform color, no bubble , no cracking and sinkhole, allow light crack | visual |
| cathodic disbonding resistance | ≤2mm | GB/T 25826-2010 |
| continuity | No visible holes, gaps, cracks, and visual defects | GB/T 25826-2010 |
| pliability(40mm) | no visible cracks, fracture, coating peel off | GB/T 25826-2010 |
| bonding strength | Coating on steel bond strength is not less than 85% of uncoated steel | GB50152 |
| impact strength | No coating material fracture | GB/T 25826-2010 |
| Resistance to chloride penetration | ＜1×10-4M | GB/T 25826-2010 |
| Chemical resistance | No softening, no bubbles, good adhesion and no pores, no sag | GB/T 25826-2010 |
| abrasive resistance | ≤100 mg | GB/T 1768-1979 |
| salt spray test(800h) | ≤3mm | GB/T 25826-2010 |
Carried Standard: JG 3042-1997; GB/T 25826-2010
Application Area: Can be widely used in Bridges, ports, airports, buildings, basements, high-speed rail, etc.
Applicable process: Electrostatic Coating
Notes:
1. Steel surface scale remove clean, reveal metal color; Steel surface roughness handling quality standard, appropriate for 50-70 - mm; Derusting grade level Sa2 1/2 (GB/T8923, no chloride attached on steel surface. Preheating: temperature should be controlled in 220-245 ℃.)
2. Product should be stored in ventilated, dry, indoor temperature below 27 ℃, away from heat, corrosive chemicals and chemical solvents, avoid bright light, the maximum stack height should not exceed 4 layers, avoid prolonged pressure, ensure airtight box. In case the clot and damp affects the fluidization performance.
3. As the product has high reactivity, it is recommended that storage period for 27 ℃ under 3 months for the best. Exceed shelf life, should be test its performance first.
Prices | Prices denpend on the colors and using environment,please tell us the colors and using environment(indoor use or outdoor use). |
Sample | 1kg powder sample is available for each color for your testing. One sample is free of cost,while you have to pay for the air freight. |
M.O.Q | The minimum order is 500kg,each color≥100kg. |
Payment | 30% T/T prepayment,70% T/T before shipment(or against BL)or L/C at sight |
Time of delivery | Production normally will be delivered in 5-8 days after receipt of prepayment. |
Our service | 1.We offer professional products and fast delivery. 2.We will help you solve problems during your usage of our products. 3.Any question can turn to the technology department of our company. |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2011
Total Annual:
1.8million-3.6million
Employee Number:
120~150
Ecer Certification：
Active Member
Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 e... Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 e...
Get in touch with us
Leave a Message, we will call you back quickly!