75% Alcohol Sanitizer Gel in a 500ml Round Bottle with Dispensing Pump

Product Specification

75% Alcohol Sanitizer Gel - 500ml Round Pump Bottle

This product is conservatively identified from the reviewed company catalogue as a 500ml alcohol sanitizer gel in a pump bottle. The catalogue presents it as a nominal 75% alcohol gel and lists ethanol at 70-80% (v/v). It also places the product within hygienic and surgical hand use. Because the current archive does not contain a product-specific instruction sheet, MSDS or matched efficacy report for product ID 55687290, those catalogue points are identification references only. They do not establish a certified reduction rate, destination-country registration or a universal clinical procedure.

Source-Listed Identification and Packing Data

Gel-Specific Product Identity

The gel form and pump package are central to this SKU. They must not be supported with the product instruction, MSDS, transport classification or use directions for the separate 75% liquid alcohol products. Even when the nominal alcohol percentage is similar, viscosity, dispensing, excipients, label instructions and transport documentation may differ. Quotations and samples should therefore retain the exact gel name, 500ml capacity, pump image and product ID.

Practical B2B Packing Points

• The 500ml pump format is intended for controlled dispensing at a fixed hygiene point.
• Do not use the source-listed locked-pump height as the raised-pump overall height. Confirm the shown configuration before specifying shelf clearance or holders.
• The carton contains 30 bottles and measures 43.5 × 37 × 21cm; do not reuse the carton data of a liquid alcohol bottle.
• Request a sealed production sample to confirm gel appearance, pump output, label text and packaging before volume ordering.

Safety and Use Verification

The catalogue describes hand-sanitizing uses, but this page intentionally sets no fixed dose, rubbing time or clinical sequence. Use must follow the approved label and the buyer’s local protocol. Until an exact MSDS is supplied, the buyer should treat it as an alcohol-containing product and obtain confirmed instructions for ignition control, storage temperature, first aid, spills, disposal and transport directly from the supplier. No liquid-alcohol MSDS has been used to fill those gaps.

Order Confirmation Record

Record the approved gel sample, front and back artwork, pump specification, batch-code location, carton marks and technical-document revision on the purchase order. The retained sample should be checked against the delivered product, because another 500ml alcohol item may use a similar bottle while having a different physical form and document set.

Documents Required Before Market Release

Request the gel-specific product instruction sheet, complete formulation or specification, MSDS, current front and back label, efficacy testing, batch COA and applicable manufacturing documents. The importing party should confirm product classification, permitted claims, label language and registration requirements in the destination country, especially where “hygienic” or “surgical” positioning is proposed.

Claims Boundary

No “99.9%” claim, ten-second claim, virus or organism claim, food-grade claim, certification, skin-compatibility promise or target-country approval is stated. The catalogue supports conservative identification; it does not replace the missing product-level technical and regulatory file.

Product FAQ

What is supplied? One 500 ml round bottle with a dispensing pump. The commercial carton contains 30 bottles.

Is it a liquid or a gel? This SKU is alcohol sanitizer gel, separate from the capped liquid-alcohol products.

What strength is printed? Nominal 75% alcohol. The catalogue lists 70%-80% V/V; this is not an independent assay of the current batch.

Which directions should be used? The current manufacturer-approved gel-specific label and matching safety data.

Gallery and Attached Reference

The original bottle image preserves its pump, red shield, date-entry frame, checkboxes and label printing. Dimension arrows mark the body diameter and the unconfirmed shown-pump height. Original label printing is not independently verified as an efficacy claim by this review.

The English gallery page and PDF are editorial summaries of the gel catalogue entry, not original English manufacturer instructions, full safety-data sheets or reports. The Chinese page is the supplied company catalogue excerpt. Confirm the delivered formula, current label revision, dating and packaging record before final purchase, and do not borrow missing documents from a similar-looking liquid-alcohol bottle.

The application scene shows the same pump bottle on a counter with natural hand-rubbing in the background. It is an illustrative usage setting, not a photograph of an actual customer, a clinical trial or a hospital endorsement. The original printed brand, label and date-entry fields are preserved without adding a new efficacy claim.