Aquacells Membrane Technologies Co., Ltd.
| Material | Sanitary-grade stainless steel and FDA-approved polymers |
| Operating temperatur erange | Up to 85 °C |
| Recovery rate | Up to 95% |
| Water qualityoutput | Ultrapure water suitable for pharmaceutical and food applications |
| Connection type | Sanitary Tri-Clamp or Flanged |
| Maximum Pressure | 150 psi |
| Power consumption | Depends on module size, typically 20-100 W |
| Electrical conductivity | Less than 1 µS/cm |
| Module type | EDI (Electrodeionization) |
| Dimensions | Varies by model, typically compact for skid integration |
| Flowrate | Varies by model, typically 1-10 GPM |
| Product name | Hot Water Sanitizable EDI Module |
| Application | Pharmaceutical, food & beverage, microelectronics, and laboratory water purification |
| Sanitization method | Hot Water |
| Certification | FDA，EU，CE，RoHS ，REACH |
| Place of Origin | China |
| Model Number | EIMD-05HP |
| Brand Name | Aquacells |
View Detail Information
Explore similar products
Product Specification
| Material | Sanitary-grade stainless steel and FDA-approved polymers | Operating temperatur erange | Up to 85 °C |
| Recovery rate | Up to 95% | Water qualityoutput | Ultrapure water suitable for pharmaceutical and food applications |
| Connection type | Sanitary Tri-Clamp or Flanged | Maximum Pressure | 150 psi |
| Power consumption | Depends on module size, typically 20-100 W | Electrical conductivity | Less than 1 µS/cm |
| Module type | EDI (Electrodeionization) | Dimensions | Varies by model, typically compact for skid integration |
| Flowrate | Varies by model, typically 1-10 GPM | Product name | Hot Water Sanitizable EDI Module |
| Application | Pharmaceutical, food & beverage, microelectronics, and laboratory water purification | Sanitization method | Hot Water |
| Certification | FDA，EU，CE，RoHS ，REACH | Place of Origin | China |
| Model Number | EIMD-05HP | Brand Name | Aquacells |
| High Light | EIMD-05HP Hot Water Sanitizable EDI Module ，Pharmaceutical Hot Water Sanitizable EDI Module | ||
The Aquacells EIMD-HP module is specifically engineered for hot water sanitization applications and is widely utilized in Pharmaceutical, biotechnology, and cosmetics industries. Constructed from high-temperature resistant materials to accommodate instantaneous heating and cooling requirements, this module delivers a constant flowrate of high-purity water without the need for chemical regeneration.
| Parameter | Specification |
|---|---|
| FCE (including CO2 and Silica) | < 45 µS/cm |
| Temperature | 5-45 ℃ (40-113 ℉) |
| Feed pressure | 1.4-7 bar (20-100 psi) |
| Total Chlorine (as CI2) | <0.05ppm |
| Fe | <0.01ppm |
| Mn | <0.01ppm |
| S2- | <0.01ppm |
| pH | 4-11 |
| Total Hardness (as CaCO3) | <1.0ppm |
| Dissolved Organics (TOC as C) | <0.5ppm |
| Silica (SiO2) | <1.0ppm |
| Parameter | Performance |
|---|---|
| Typical Recovery | 90-95% |
| Maximum Feed Pressure | 7 bar (100 psi) |
| Maximum Feed Temperature | 45 ℃ (113 ℉) |
| Sanitization Temperature at 30 psi (2.0 bar) | 85 ℃ (185 ℉) |
| DC Voltage* | 0-600 V |
| DC Amperage | 0-10 A |
| Product Conductivity | <0.1 µS/cm |
| Silica (SiO2) Removal | 90-99% depending on feed water |
*Voltage required depends on module size
The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.
Company Details
Business Type:
Manufacturer
Ecer Certification：
Verified Supplier
Aquacells Membrane Technologies Co., Ltd. Aquacells Membrane Technologies Co., Ltd.
Get in touch with us
Leave a Message, we will call you back quickly!