Crawler Excavator Rock Drill Attachment Color Customized OEM Available

Product Specification

Excavator DTH drill attchment ProDrill high quality Excavator drill attachment,rock drill attachment

Hydraulic drilling rig
Application areas:
Outdoor: blasting drilling, static cracking drilling, used for foundation excavation, urban municipal engineering construction
Coordination between equipment, stone (marble, granite, sandstone, limestone, etc.) mining, quarry, etc
The use of expansion agents, handheld splitting machines, static explosive mining, explosives, etc.
Tunnel: Adding single-stage/two-stage rotary drilling on the basis of hydraulic rock drilling rig for open-pit excavation
Supporting mechanism, capable of operating at multiple positions and angles such as tunnel working face, roof, side support, etc., effectively
360 degree drilling without blind spots. Especially suitable for tunnel, roadway and other section excavation blast holes and
Anchor hole operation.

EXCAVATOR DRILL
Dopro Excavatot Drill Advantages:
Multi-purpose: do not change the performance of the original
machine, 1 hour can be realized drilling, excavator exchange.
Simple operation: in the excavator cab, the operator can
operate after simple training, without professional personnel.
Fast speed: The hydraulic drill in the hardness of 5.6 degrees
above the rock drilling speed can reach a minute 2-4 meters, is 8
to 10 times of the pneumaticequipment
Flexibilitly: The excavator rock drill fully combines the walking
convenience of the excavator and the drilling speed and other
advantages of the drill, can be suitable for complex conditions of
drilling operations.
Compared with the traditionall drilling machine, it has the
following advantages :
1 It greatly improves the construction environment, reduces the
labor intensity and labor cost
2, the construction efficiency is improved several times.
3. Reduce environmental pollution and reduce energy
consumption.
4. The excavator rock drill has strong walking abilitly and large
operating range.

Performance parameter 
Drill hole diameter of 120mm (commonly 80mm)
Drilling depth of 10m (without changing the rod, commonly 3m and 6m)
Drilling time 1500-3500mm/min
Suitable for rocks below grade 6 and 7 (such as shale, sandstone, mudstone)
technical parameter
Drill pipe diameter 60mm
Drill rod length 3.66m7.2m
Rotation torque 360~1180N. m (infinitely adjustable)
Rotation speed 0~540r/min (infinitely adjustable)
Working air volume 3m '/min
Working wind pressure 0.7-1Mpa
The hydraulic system uses a pressure of 16Mpa
The required excavator tonnage for one-time drilling of 3m
135 and above
One time pore formation of 6m180 or more

Drilling parameters for down the hole method
performance parameter
Drilling diameter ≤ 110mm (commonly 80mm)
Drilling depth ≤ 20m (without rod replacement, commonly 3m and 6m)
Drilling time 700-1100mm/min
Suitable for rocks above grade 6 and 7 (such as limestone, bluestone, granite)
Required excavator tonnage 150-200 drilling diameter: 70-90mm hole depth: ≤ 10m air compressor: GCU30 or GCU55
220-300 drilling diameter: 70-100mm hole depth: ≤ 15m air compressor: GCU55
Drilling diameter of 300 and above: 70-110mm, hole depth: ≤ 20m, air compressor: GCU75

DOPRO is a professional manufacturer committed to the design and production of Hydraulic Breaker and Attachments Whether your job is breaking down concrete surfaces, trenching, or preventing blockage in crushing systems, DOPRO is made to withstand continuous breaking in harsh environments. We DOPRO use only high quality low materials to produce superior product and all the manufacturing process such as heat treatment, forging, machining, grinding and ets, are strictly controlled by qualitied and experienced engineers in our factory with computerized and latest facilities. All parts are thoroughly inspected at every time that each process such as cutting, heat treatment, machining, grinding, cleaning, assembly, etc. is carried out, and all inspection data per each production lot are maintained and controlled so as to be utilized as data for better qualities and performance improvement. Major parts such as piston cylinder and etc are designed for outstanding durability through structure analyses, and mass production is started only when a proto type has been completely