Glasurit P-C-30 2K Acrylic Polyurethane Clear Coat High Gloss Car Refinish With

Glasurit P-C-30 High Gloss Clear Coat is a professional two-component acrylic polyurethane clear coat for automotive refinishing. Designed for premium collision repair, fast-turnaround body shops, complete resprays and high-gloss vehicle restoration, it provides a transparent, smooth and full-bodied finish.

The P-C-30 system is mixed at 2:1 by volume with a compatible hardener, followed by 10% compatible thinner. It can be used with:

• P-H-410 Fast Clear Coat Hardener
• P-H-430 Standard Clear Coat Hardener
• P-H-440 Slow Clear Coat Hardener

For workshops seeking faster process flow, P-C-30 supports an efficient 1.5-coat application method: a light mist coat followed immediately by a full wet coat, with no intercoat flash-off and no flash-off before baking. It can also be applied in a conventional two-coat process.

With a recommended dry-film thickness of 40–60 μm, P-C-30 provides natural leveling, mirror-like gloss and a deep paint appearance with reduced need for post-polishing.

Traditional clear coat processes often require two full coats and 10–15 minutes of intercoat flash-off. P-C-30 can be applied using a 1.5-coat method, helping reduce the workflow time before baking.

In the high-efficiency application method, the coating does not require intercoat flash-off or flash-off before baking. This allows a more continuous body shop process during peak repair periods.

For small repair areas, P-C-30 can be processed with short-wave infrared drying in approximately 8 minutes, supporting fast handling and post-processing after correct cooling.

The acrylic polyurethane clear coat system is designed to create a smooth, high-gloss and visually full finish. Strong leveling performance helps reduce orange peel and may reduce the polishing workload.

At 20°C, the mixed product has a 2-hour pot life, giving painters more practical working time for large panels and complete vehicle repainting.

• Professional 2K acrylic polyurethane clear coat
• High-gloss, transparent and high-leveling finish
• Efficient 1.5-coat flash-free application option
• Conventional two-coat process also available
• No flash-off required before baking in the 1.5-coat process
• 2-hour pot life at 20°C
• Recommended dry-film thickness: 40–60 μm
• 60°C bake cure in 30 minutes
• Short-wave infrared drying in 8 minutes
• Ambient curing at 20°C for 10 hours
• Compatible with fast, standard and slow hardener options
• Suitable for spot repair, panel repair and full vehicle refinishing
• Supports reduced polishing requirements through natural leveling and film fullness

During peak workshop periods, P-C-30 helps streamline the clearcoat process. The 1.5-coat application route allows painters to move vehicles into the bake cycle without waiting for conventional intercoat and pre-bake flash-off periods.

The 2-hour pot life at 20°C gives professional painters a practical working window for full vehicle refinishing, including roofs, hoods, doors, quarter panels and multiple connected panels.

For bumpers, fenders, mirrors and localized repair areas, short-wave infrared drying can bring the surface to a post-processing condition in approximately 8 minutes, subject to equipment setup and process control.

The high-gloss, smooth and full-film appearance supports high-end customer handover standards for luxury vehicles, dealership preparation, restoration work and custom paint jobs.

P-C-30 can be paired with P-H-440 slow hardener and P-R-130 slow thinner for large panels, warm weather or applications requiring more controlled flow and leveling.

Actual performance depends on substrate preparation, film thickness, equipment, environmental conditions, application technique and curing equipment.

Ensure the automotive basecoat is fully flashed, clean, dry and free from dust, silicone, oil and other contamination. Follow the relevant basecoat system procedure before applying clear coat.

Mix the product by volume:

100% P-C-30+50% compatible hardener+10% compatible thinner100% P-C-30+50% compatible hardener+10% compatible thinner

Equivalent mixing ratio:

P-C-30:Hardener=2:1P-C-30:Hardener=2:1

Select P-H-410, P-H-430 or P-H-440 hardener according to temperature, panel size and working speed. Select P-R-110, P-R-120 or P-R-130 thinner as required.

Stir thoroughly and filter before adding to the spray gun.

1. Apply one light mist coat.
2. Immediately follow with one full wet coat.
3. No intercoat flash-off required.
4. No flash-off required before baking.

1. Apply the first full coat.
2. Allow approximately 3 minutes flash-off.
3. Apply the second full coat.

Short-wave IR drying may be enhanced using P-A-920 curing accelerator, where applicable and according to the approved process.

Let the painted surface cool fully to room temperature. If minor dust nibs or surface imperfections are present, wet sand lightly with fine abrasive paper and polish carefully.

Create a complete automotive refinishing solution with:

• P-H-410 Fast Clear Coat Hardener
• P-H-430 Standard Clear Coat Hardener
• P-H-440 Slow Clear Coat Hardener
• P-R-110 Fast Automotive Thinner
• P-R-120 Standard Automotive Thinner
• P-R-130 Slow Automotive Thinner
• Automotive basecoat system
• 2K primer surfacer
• Epoxy primer
• Polyester body filler
• Automotive panel wipe and degreaser
• Paint strainers, mixing cups and tack cloths
• HVLP automotive spray gun
• Polishing compound and finishing pads

1. What is P-C-30 used for?

P-C-30 is a high-gloss 2K acrylic polyurethane clear coat for professional automotive collision repair, panel refinishing, complete resprays and custom paintwork.

2. What is the mixing ratio for P-C-30?

Mix 2 parts P-C-30 clear coat with 1 part compatible hardener, then add 10% compatible thinner by volume.

3. Which hardener should I use with P-C-30?

Use P-H-410 for fast process requirements, P-H-430 for standard conditions, or P-H-440 for slower, more controlled application on larger panels or in warmer conditions.

4. Can I use the 1.5-coat application process?

Yes. Apply a light mist coat followed immediately by a full wet coat. This method does not require intercoat flash-off or flash-off before baking.

5. How long is the pot life?

The mixed material has a pot life of up to 2 hours at 20°C.

6. How quickly can P-C-30 be dried?

It can air dry for 10 hours at 20°C, bake for 30 minutes at 60°C, or be dried with short-wave infrared for approximately 8 minutes under suitable process conditions.

7. What dry film thickness is recommended?

The recommended dry-film thickness is 40–60 μm.

8. What is the HS code for P-C-30 clear coat?

The supplied HS code is 3208100000. Buyers should confirm final import classification with their customs broker or local authority.