Glasurit P-C-40 2K Scratch Resistant Clearcoa High Gloss Automotive Clear Coat

Glasurit P-C-40 Scratch Resistant Clear Coat is a two-component automotive refinishing clear coat designed for high-end repair work, full-panel refinishing, luxury vehicle collision repair and custom paint applications. Used with P-H-440 Slow Hardener and 10% compatible thinner, it delivers a high-gloss, transparent and full-bodied protective finish.

The system uses a 2:1 mixing ratio by volume and is formulated for professional spray application over properly flashed automotive basecoat systems, particularly Glasurit 90 Series basecoats. Its slow-reacting hardener option supports smoother flow and better film formation on bonnets, doors, quarter panels and other large vehicle surfaces.

After curing, the coating forms a dense, resilient acrylic-polyester crosslinked film designed to reduce the appearance of fine wash scratches and everyday abrasion marks while preserving gloss and visual depth.

P-C-40 is positioned for workshops that need more than a basic fast-dry clear coat. It is suitable for repair centers handling premium vehicles, full resprays, show cars and high-value repainting jobs where gloss retention and surface appearance influence final delivery quality.

Frequent washing, wiping and light contact can create swirl marks and fine surface scratches. The resilient cured clear film is designed to better withstand these minor abrasion stresses than ordinary automotive clear coats.

Fast systems can dry too quickly during bonnet, roof, side-panel or complete vehicle spraying, increasing the risk of dry spray, blend lines and orange peel. The P-H-440 slow hardener supports more controlled solvent release and leveling, especially where working time is needed.

The clear coat is designed to provide film fullness after two coats. Its high transparency helps metallic and pearl basecoat colors remain vivid, while the cured film gives the repair area a deeper, more refined appearance.

Professional refinishers can choose ambient drying or accelerated bake curing depending on shop workflow:

• Air dry: 10 hours at 20°C
• Bake dry: 30 minutes at 60°C

This is a professional 2K clear coat system consisting of:

2 parts P-C-40 Clear Coat : 1 part P-H-440 Hardener + 10% thinner

Use a compatible fast, standard or slow thinner based on ambient temperature, ventilation, panel size and repair workflow.

• 2K acrylic automotive clear coat for professional refinishing.
• Scratch-resistant clear film designed to help reduce fine wash marks and minor abrasion damage.
• High-gloss finish with strong visual depth and reflection.
• High transparency to support the appearance of metallic, pearl and solid-color basecoats.
• High film fullness after two recommended coats.
• Slow hardener system suitable for large panels and complete respray work.
• Controlled solvent release helps reduce the risk of pinholes in elevated-temperature baking conditions.
• Compatible with Glasurit 90 Series basecoat systems when applied according to the relevant paint-system procedure.
• Suitable for air drying or bake curing.
• Designed for professional body shop spray application.

Glasurit P-C-40 is suitable for professional automotive refinishing applications such as:

1. Luxury vehicle collision repair For refinishing repaired doors, bumpers, hoods, trunk lids, fenders and quarter panels where appearance must match high customer expectations.
2. Complete vehicle resprays Suitable for full-body repainting where consistent leveling and gloss are important across large surfaces.
3. Large-panel refinishing A practical choice for hoods, roofs, side panels and other broad areas that need more flow time than fast-dry systems provide.
4. Custom color and show-car projects Helps enhance the visual clarity of metallic, pearl and special-effect basecoat colors.
5. High-throughput body shops The 60°C / 30-minute baking cycle supports fast return-to-service workflows when correct booth conditions are available.
6. High-contact vehicle areas Suitable for refinished areas exposed to frequent wiping, washing and daily use, including hoods, door zones and exterior panels.

Premium repair shops need consistent gloss, transparency and surface uniformity. P-C-40 offers a professional clear coat system for repairs where customer perception of finish quality is critical.

In warm regions such as the Middle East, coating flow and solvent release require careful control. The slow hardener option can provide additional working time for properly managed applications.

Large panels expose the limitations of overly fast systems. P-C-40 with P-H-440 helps support a smoother application window for complete vehicle repainting and broad panel repair.

The product can be supplied as clear coat and hardener components for automotive refinish distributors, paint stores, workshop supply companies and regional wholesale networks.

Actual results depend on surface preparation, spray equipment, temperature, film build, flash-off time, booth ventilation and curing conditions.

Make sure the 90 Series basecoat, or other approved compatible basecoat, has been applied correctly and has flashed off sufficiently. The surface must be clean, dry and free from dust, oil, silicone and contaminants.

Mix by volume:

• 2 parts P-C-40 Clear Coat
• 1 part P-H-440 Slow Hardener
• 10% compatible thinner

Select fast, standard or slow thinner according to ambient temperature and job requirements. Stir thoroughly until uniform, then filter before filling the spray gun cup.

Recommended setup:

• Spray gun: HVLP
• Nozzle size: 1.3–1.4 mm
• Spray pressure: 2.0 bar

Confirm atomization and fan pattern before spraying the vehicle panel.

Apply 2 even coats with appropriate overlap and stable gun distance. Avoid excessive film build in a single pass.

Allow 3–5 minutes flash-off between coats.

Choose one of the following drying options:

• Ambient cure: 10 hours at 20°C
• Baking cure: 30 minutes at 60°C

After complete curing and cooling, inspect the finish. Polish only when the coating has cured adequately for the selected process.

For large panels, high ambient temperatures or complete resprays, use process controls that support wet-edge retention and even flow. Excessive air movement, unsuitable thinner selection or incorrect gun distance can affect final appearance.

Always refer to the applicable Technical Data Sheet, Safety Data Sheet and local regulatory requirements before use, transport or sale.

Supply combinations can be discussed based on distributor, workshop or export order requirements.

Build a complete automotive refinish system with related products:

• Glasurit 90 Series Basecoat
• 2K Automotive Primer Surfacer
• Automotive Epoxy Primer
• Polyester Body Filler
• Fast, Standard and Slow Automotive Thinners
• 2K Clear Coat Hardener
• Automotive Degreaser and Panel Wipe
• Tack Cloth and Paint Strainer
• HVLP Automotive Spray Gun
• Automotive Polishing Compound and Finishing Pad

1. What is Glasurit P-C-40 clear coat used for?

It is used as a high-gloss protective topcoat in professional automotive refinishing, including collision repair, large-panel repair, full resprays and custom paintwork.

2. What hardener should be used with P-C-40?

P-C-40 is used with P-H-440 Slow Hardener at a 2:1 volume ratio.

3. How much thinner should be added?

Add 10% compatible thinner after mixing P-C-40 and P-H-440. Choose fast, standard or slow thinner based on workshop temperature and application conditions.

4. Can this clear coat be sprayed over metallic or pearl basecoat?

Yes. Its transparent high-gloss finish is designed to support the visual depth of metallic and pearl basecoat colors when the basecoat is properly applied and flashed.

5. How many coats are recommended?

Apply two coats, allowing 3–5 minutes of flash-off between coats.

6. Can P-C-40 be baked in a spray booth?

Yes. The recommended baking condition is 30 minutes at 60°C. Ensure correct booth operation, airflow and panel-temperature control.

7. Is P-C-40 suitable for large panels such as hoods and side panels?

Yes. Used with the P-H-440 slow hardener, it is intended to provide a more controlled application window on large surfaces than many fast-dry clear coat systems.

8. What is the HS code for this automotive clear coat?

The supplied HS code is 3208100000. Importers should confirm the final customs classification with their local customs broker or destination-country authority.