CRAMOS TAKrags 1020 Nonwoven Tack Cloth 35x35cm Pre-Paint Dust Removal for

CRAMOS TAKrags 1020 is a nonwoven tack-rag solution designed for the final dust-removal step before spray painting. Each 35 × 35 cm sheet is used to pick up loose dust, fine particles, and surface fibers from properly prepared workpieces before primer, basecoat, or clearcoat application.

In automotive refinishing, even small airborne particles can become visible as dust nibs or rough points after coating. A controlled final wipe helps painters prepare vehicle panels, bumpers, doors, hoods, alloy wheels, chrome-finished parts, and other components for a cleaner spray process.

The product is supplied in a compact format of 10 sheets per box. Twenty boxes are packed per outer carton, providing a total of 200 sheets per carton for workshops, distributors, and industrial coating operations.

Use the cloth after the required sanding, cleaning, and degreasing steps to remove loose dust and minor surface contamination before paint application.

The nonwoven construction supports gentle, controlled wiping on properly prepared surfaces. Light wiping is recommended to avoid transferring contaminants or disturbing the prepared surface.

By reducing loose particles before spraying, the cloth helps minimize the risk of dust-related imperfections that may affect the visual smoothness of primer, basecoat, or clearcoat finishes.

Suitable for use before:

• Primer application
• Basecoat and metallic color application
• Clearcoat application
• Wheel coating and alloy-effect paint application
• Industrial metal spray coating

The 10-sheet box supports practical storage, easy access, controlled consumption, and convenient carrying around a repair or coating facility.

Use on prepared car body panels before paint application, including:

• Bumpers
• Doors
• Hoods
• Fenders
• Quarter panels
• Repair areas and replacement panels

The cloth is suitable as a final dust-removal wipe before primer, basecoat, metallic color, and clearcoat processes.

Use to remove loose dust from prepared wheel surfaces before applying wheel coatings, metallic paint, alloy sparkle finishes, or clearcoat.

Typical uses include:

• Aluminum alloy wheels
• Refinished wheels
• Custom wheel projects
• Chrome-finished wheel components
• Metal-effect and metallic coating preparation

Suitable for pre-spray preparation of metal and hardware components where surface cleanliness matters, such as:

• Metal sheets
• Equipment housings
• Industrial cabinets
• Machinery covers
• Hardware parts
• Metal fixtures and decorative components

1. Complete the required substrate preparation, including sanding and cleaning according to the coating system.
2. Ensure the surface is dry and the working area is reasonably clean.
3. Remove one CRAMOS TAKrags 1020 sheet from the box.
4. Fold the sheet as needed for comfortable handling.
5. Wipe the prepared surface lightly and evenly to collect loose dust and fine particles.
6. Do not use excessive pressure.
7. Apply primer, basecoat, or clearcoat according to the relevant paint product technical instructions.

Important: This product is a pre-paint dust-removal cloth. It does not replace degreasing, sanding, masking, substrate repair, or other required surface-preparation steps.

• Unit packing: 10 sheets per box
• Master carton: 20 boxes per carton
• Total quantity: 200 sheets per carton
• Inner box size: 12.5 × 5.5 × 14 cm
• Outer carton size: 35.5 × 27.5 × 28 cm

For distributor orders, OEM/private-label packaging, sample requests, and export packing requirements, confirm MOQ and available options before placing an order.

• Automotive wax and grease remover
• Masking tape and masking film
• Abrasive paper and sanding discs
• 2K primer surfacer
• Waterborne basecoat colorants
• 2K metallic topcoat paints
• 2K alloy wheel and chrome clearcoat
• Spray gun cleaning supplies

It is used to remove loose dust, fine particles, and surface fibers from prepared workpieces before spray painting.

Yes. It is suitable as a final dust-removal wipe before these coating stages, provided the surface has been prepared correctly.

Yes. It can be used to remove loose dust from prepared alloy wheel, metal wheel, and selected chrome-finished wheel surfaces before coating.

No. It does not replace the required degreasing process. Remove oil, wax, silicone, and other contaminants using an appropriate cleaner before the final tack-rag wipe.

Use light and even wiping pressure. Excessive pressure is not recommended.

Yes. It is suitable for metal panels, cabinets, equipment housings, hardware, and other parts before spray coating.

One carton contains 20 boxes, with 10 sheets per box, for a total of 200 sheets.

It may be available subject to MOQ, artwork approval, packaging requirements, and supplier confirmation.