PPG SPRAGON DC266 Automotive Refinishing Clear Coat G266 Hardener Glossy Fast

PPG SPRAGON DC266 is engineered for professional automotive refinishing, providing a balanced formula that prioritizes practical efficiency, consistent finish quality and shop productivity.

Developed by PPG—a global coating leader—DC266 serves professional body shops, collision centres and refinish distributors who require dependable performance on daily repair jobs.

Key Attributes:

• Brand: PPG SPRAGON
• Type: Two-component acrylic polyurethane clearcoat
• Mixing: 2:1 (DC266 : G266)
• Drying: 30 min  60°C or 8 hours  25°C
• Film Build: Full-bodied, bright gloss finish
• Best For: Panel repair, spot work and high-volume refinishing

Three Core Advantages:

1. Consistent PPG System Integration DC266 is part of the PPG SPRAGON professional ecosystem, with proven compatibility data and industry recognition.
2. Practical Shop Efficiency Fast leveling and quick drying reduce booth occupancy and labour time, improving throughput and profitability.
3. Reliable Finish Quality DC266 delivers full-bodied, bright gloss coatings with low defect risk, supporting customer satisfaction.

Feature 1: Fast Leveling & Smooth Flow

The clearcoat flows smoothly after application, self-leveling to create a flat, smooth surface and minimize orange-peel and sag defects.

Feature 2: Full Film Build

DC266 creates a thick, transparent protective layer that appears rich, deep and saturated.

Feature 3: Bright, Long-Lasting Gloss

Once hardened, DC266 provides a sharp, glossy finish that maintains lustre through typical use and weathering.

Feature 4: Flexible Drying Schedules

• Air Dry: 30 minutes dust-free; 8 hours full cure
• Force Dry: 30 minutes  60°C

Feature 5: Climate-Matched Hardener System

Temperature-specific hardeners (G266-0, G266-2, G266-3) allow optimal performance in cool, moderate or hot climates.

Collision & Accident Repair

Provides the final protective layer on accident-damaged and repaired vehicles.

Panel Replacement & Spot Repair

Ensures fast, reliable colour matching and gloss uniformity on doors, fenders, bonnets and bumpers.

High-Volume Body Shop Operations

Ideal for shops handling multiple vehicle repairs daily, supporting continuous workflow.

Automotive Restoration & Repainting

Suitable for older vehicles, fleet vehicles and cosmetic or full repainting projects.

Multi-Climate Refinishing

Temperature-specific hardener options reduce formulation complexity for global suppliers.

G266-0 / G266-1 — Below 15°C

Use T201. Slower evaporation for cold, dry conditions.

G266-2 — 15–25°C

Use T202. Balanced hardening and film leveling.

G266-3 — 25–35°C

Use T203. Faster hardening for hot climates.

1. Surface Readiness

   Basecoat must be clean, dry and dust-free. Use a tack cloth.

2. Mixing

   Mix DC266 and temperature-matched G266 at 2:1 ratio. Add corresponding thinner. Stir 5–10 minutes.

3. Spraying

   Apply light, even passes: first coat, 8–10 min flash-off, then 1–2 full-coverage coats.

4. Drying & Curing

   Choose air dry (8 hours) or force dry (30 min  60°C). Sand and polish once fully cured.

5. Finishing

   Sand with P1200 or finer; machine-polish to final gloss.

Quality Consistency

PPG standards ensure batch-to-batch uniformity. Generic products often show gloss or flow variation.

Brand Recognition & Support

PPG backing reduces liability and risk with technical documentation and warranty.

System Integration

DC266 engineered as part of the full PPG SPRAGON system, reducing compatibility issues.

Environmental Compliance

Complies with VOC regulations in Europe, North America and other major markets.

Clearcoat (DC266):

• 5L per can, 4 cans per box
• Box: 37.3 × 24.5 × 34 cm, ~22 kg

Hardener (G266-3):

• 2.5L per can, 8 cans per box
• Box: 37.3 × 24.5 × 34 cm, ~22 kg

Shelf Life: 24 months

Q1: Can I use DC266 over a different brand's basecoat?

A: Compatibility should be verified through testing or technical consultation.

Q2: Is a flex additive needed for plastic parts?

A: DC266 is for typical automotive surfaces. For flexible parts, consult the TDS or test.

Q3: What spray equipment is recommended?

A: Gravity (1.3 mm nozzle) or suction (1.4 mm nozzle) guns at 3.0–4.0 bar.

Q4: How long after spraying can I sand or polish?

A: 8 hours air dry  25°C, or 30 minutes force dry  60°C.

Q5: What if I spray in very hot, humid conditions?

A: Above 35°C with >70% humidity, consult PPG technical support.

Q6: Can mixed DC266 be stored for later use?

A: No. Pot life is 2 hours. Use mixed batch within pot life; do not store.

Q7: How should leftover material be disposed of?

A: Follow local environmental regulations and the product SDS.

Volume Discounts:

• 10–50 units/month: Preferred pricing
• 50–200 units/month: Premium wholesale rates
• 200+ units: Custom pricing

Support:

• Technical seminars
• Marketing materials
• Dedicated technical hotline
• Product updates