CRAMOS 1020 Nonwoven Sticky Tack Rag 35cm x 35cm Automotive Spray Paint Surface

A high-quality coating job depends on more than paint selection. Loose dust, fibers, and small particles can remain on a prepared panel and become visible after primer, color, metallic paint, or clearcoat is sprayed. CRAMOS 1020 Nonwoven Sticky Tack Rags are designed for the final wipe before coating application.

The 35 * 35 cm nonwoven sheets are suitable for professional paint shops, wheel restoration workshops, and industrial coating lines. They help collect loose surface contamination from clean, dry, correctly prepared parts, supporting a more controlled spraying environment.

Each retail box contains 10 sheets. For bulk supply, 20 boxes are packed in one outer carton, equal to 200 sheets per carton.

• A Final Step for Surface Cleanliness — Use the tack rag immediately before spraying to pick up loose dust that may have settled during sanding, masking, handling, or movement around the work area.
• Built for Refinish Workflows — The product is relevant to many common coating sequences, including primer surfacer application, automotive basecoat application, metallic and special-effect paint application, high-gloss clearcoat application, and wheel paint and clearcoat application.
• Nonwoven Material for Controlled Wiping — The cloth is intended for light, controlled wiping. This makes it a practical choice for prepared automotive panels, wheel surfaces, metal components, and industrial parts that require a final check before spray coating.
• Helps Reduce Common Surface Defects — Removing loose dust before paint application can help lower the chance of dust nibs, embedded particles, and rough visual texture in the finished coating. Actual results depend on the complete preparation process, paint booth conditions, and application practice.
• Efficient Packing for Daily Workshop Use — Ten sheets in each box make it easier to manage daily consumption without opening a large bulk pack. The master carton format supports distributor and workshop purchasing.

• Car Body and Repair Panels — For prepared automotive surfaces before spray coating, including car doors, hoods and trunks, bumpers, fenders, repair sections, and replacement panels.
• Wheel Reconditioning and Custom Coating — A useful final wipe before applying paint to alloy wheels, CNC-finished wheels, repaired wheels, wheel spokes and rim faces, chrome wheel components after suitable preparation, and metallic, sparkle, and clearcoat wheel systems.
• Motorcycle Components — For tanks, frames, wheel components, covers, and metal accessories that are being prepared for spray-paint application.
• Industrial and Decorative Metal — For coating preparation on equipment casings, electrical cabinets, metal doors and trim, hardware products, machinery components, display fixtures, and fabricated metalwork.

1. Prepare the Workpiece — Carry out all required repair, sanding, masking, cleaning, and degreasing work according to the paint-system instructions.
2. Allow the Surface to Become Dry and Clean — Do not use the cloth on a wet, oily, waxed, or visibly dirty surface. Remove those contaminants first using the correct cleaning process.
3. Take One Sheet — Remove one 35 * 35 cm sheet from the CRAMOS 1020 box. Fold it to suit the surface shape and the operator's handling preference.
4. Wipe Lightly — Move the cloth gently across the surface to collect loose dust and fine particles. Avoid excessive pressure.
5. Spray According to the Coating System — Apply the selected primer, basecoat, metallic color, or clearcoat in accordance with the relevant technical data sheet.

• Use only on clean, dry, properly prepared surfaces.
• The product is intended to remove loose dust and does not replace degreasing.
• Use light pressure during wiping.
• Follow the technical instructions and safety requirements for the coatings being applied.
• Keep unused sheets clean and protected from contamination.

• Surface cleaner / wax and grease remover
• Automotive masking tape
• Masking paper and plastic film
• Sandpaper and abrasive discs
• Primer surfacer
• Automotive basecoat and waterborne colorant systems
• 2K clearcoat for vehicle panels and alloy wheels
• Spray-gun maintenance products

Q: Is CRAMOS 1020 only for car painting?

A: No. It is suitable for automotive refinishing, wheel coating, motorcycles, industrial metal parts, and other spray-coating preparation tasks.

Q: What does a tack rag do?

A: It is used as a final wipe to collect loose dust, fibers, and small particles before spraying paint or clearcoat.

Q: Can I use it before metallic paint?

A: Yes. It is suitable before metallic basecoat and other compatible color-coating processes, after correct preparation.

Q: Can I use it directly on a dirty or oily panel?

A: No. First clean and degrease the surface using the appropriate procedure. The tack rag is for final loose-dust removal.

Q: Can it be used for alloy wheel painting?

A: Yes. It is suitable for removing loose dust from properly prepared alloy wheel surfaces before paint or clearcoat application.

Q: What is the carton quantity?

A: There are 20 boxes per carton, with 10 sheets per box, totaling 200 sheets.

Q: Can I order with my own brand?

A: OEM or private-label service may be available, subject to MOQ, package design approval, and supplier confirmation.