Jet Type Heat Shrink Packing Machine Automatic Shrink Packaging Machine 4.5KW

Product Specification

Top Seller High Quality Jet Type Heat Shrinking Packing Machine QNBS-4525J Long Serving Span

The jet type heat shrink packaging machine is a new type of automatic continuous shrink packaging equipment in China. It adopts a hot air circulation structure and uses an intelligent temperature controller to control the temperature. The metal heating tube heats up and comes with a heat sink, making the temperature control inside the furnace more accurate and stable. The conveying speed can be adjusted to better control the shrink effect, save electricity and be efficient. The shrink temperature is very high. The motor transmission speed is stable and adjustable, and the adjustable range is wide. The advanced jet type device allows the height and wind direction of the shrink furnace to be freely adjusted. It is suitable for PVC, POF, PP and other heat shrink films.

Features:

1. Jet heating furnace hot air circulation: Adopting a hot air circulation structure, the entire furnace has strong sealing, effectively forming a hot air circulation inside the furnace, resulting in more uniform heating and better packaging shrinkage effect.

2. Metal heating tube: A metal heating tube with built-in heat sink, which will not be damaged after long-term use, is more stable and energy-saving than quartz tubes.

3. Adjustable furnace height: The furnace height can be adjusted according to the size of the packaging, and the dust cloth can also be adjusted in length according to the height of the furnace, greatly improving the packaging performance of the equipment.

4. Intelligent digital temperature controller: Adopting a pure digital control intelligent digital controller, the temperature control is more accurate, the furnace temperature is more stable, and the shrinkage effect is better! 

Details:

1. Chain conveyor belt: Pure metal chain conveyor belt, covered with high-temperature resistant silicone tape, shrink wrapped without leaving marks, better and more stable product packaging effect, effectively improving work efficiency.

2. Safety protection operation: The digital control intelligent digital temperature controller, combined with a leakage protection safety switch, greatly improves the safety of machine operation.

3. Heat dissipation tube heating: The machine uses heat dissipation tubes for heating, which saves more than 15% of electricity compared to traditional quartz heating tubes. The bottom heating is less susceptible to interference and has higher stability.

4. Built in wind blade device: The machine is equipped with a large wind blade device inside, providing super large wind force to form a good wind circulation system for the shrinkage furnace, making the shrinkage effect more uniform!

5. Jet air force adjustment: The hot air force of the machine can be controlled by adjusting the tightness of the nut, which can adjust the jet angle according to actual needs, making the contraction accuracy more accurate.

6. Adjustable height of the furnace: The furnace can be adjusted up and down according to the height of the products, making the heating of the products in the furnace more uniform and the packaging effect better.

7. High temperature resistant dust-proof cloth: The machine is equipped with high-quality high-temperature resistant dust-proof cloth at the inlet and outlet, which is dust-proof, non sticky, easy to clean, and has a long service life!

8. Increase the power of the motor: High quality high-power motors with stable and strong output power effectively extend the lifespan of the motor, making the machine more widely applicable.

9. High temperature resistant dust-proof cloth: There are four rollers installed under the machine, which can make the machine move without wasting time. The brake design increases flexibility and effectively improves work efficiency.

Technical parameters: