DT-GS1000 Linear Filling Machine with Diving-Type Dual-Speed Filling, 100ml

Model DT-GS1000 Anti-Foaming Linear Tracking Filling Machine is specially customized for production scenarios of foam-prone materials. It adopts diving-type dual-speed tracking filling technology, adapts to a wide 100ml-5000ml filling range, and effectively eliminates material foaming and overflow. With stable operation and strong adaptability, it is the dedicated equipment for automatic filling of foam-prone fluid materials.

1. Diving-type dual-speed filling valve rises synchronously with the liquid level, fundamentally eliminating material foaming and overflow
2. Dynamic tracking filling, synchronous operation during bottle movement without shutdown, adjustable production capacity from 20 to 80 bottles per minute
3. High-precision servo metering with filling error ≤±1%, stable and controllable net content
4. Anti-drip suck-back structure to prevent material stringing, drip leakage and bottle body pollution
5. Intelligent parameter storage, one-click switch of material/bottle type parameters, convenient for quick changeover
6. Photoelectric positioning control, no bottle no fill, automatic shutdown for deviation, ensuring stable production

1. Will foaming and overflow occur when filling foam-prone materials?
   No. It adopts a diving-type dual-speed filling structure, the filling nozzle goes deep into the bottle bottom and rises with the liquid level, controlling the flow rate in a fast-first-then-slow mode, fundamentally eliminating material foaming and overflow.
2. Can it be adapted to foam-prone materials with different viscosities?
   Yes. It can be adapted to various low and medium viscosity foam-prone materials by adjusting filling speed and suck-back parameters.
3. Will material stringing and drip leakage occur during filling?
   It is equipped with an anti-drip suck-back filling valve, which sucks back residual material instantly after filling, preventing material stringing, drip leakage and bottle body pollution.
4. Can the filling speed of the equipment be adjusted?
   Yes. The production capacity can be freely adjusted from 20 to 80 bottles per minute, adapting to production needs of different batches.
5. Does it require complex debugging when changing different bottle types?
   No. It supports one-click storage and call of more than 100 sets of formula parameters. When changing bottle type/material, you only need to simply adjust the guide parts without complex debugging.
6. Can irregular bottles be filled normally?
   Yes. It can be adapted to round, square, irregular and other daily chemical packaging bottle types by customizing guide parts.
7. Will incorrect filling occur when there is no bottle?
   It is equipped with a high-precision photoelectric positioning system, realizing no bottle no fill, and automatic shutdown when the bottle is deviated, avoiding material waste.
8. What is the stable filling accuracy of the equipment?
   Under rated working conditions, the filling error is stably ≤±1%, ensuring the compliance of the net content of each bottle.
9. Can it be linked with other equipment of the daily chemical production line?
   Yes. It can be seamlessly docked with bottle unscrambling, capping, labeling, coding and other equipment to build a fully automatic production line.
10. What are the power supply and air supply requirements of the equipment?
    It adopts AC220V 50Hz general power supply, and requires a stable air supply pressure of 0.5-0.8MPa, which can be met by conventional daily chemical workshops.