Allen Bradley Modules 1756-IB16D 1756 IB16D AB 1756IB16D Input Module 12 month

Product Specification

Allen Bradley Modules 1756-IB16D 1756 IB16D AB 1756IB16D Input Module 12 month warranty

Product Description:

For the requested packet interval, enter the number of milliseconds desired between each I/O message
between the ControlLogix processor and the 1203-CN1. The 1203-CN1 can handle a packet interval as
low as 5 milliseconds; therefore, make sure that this value is set to at least Click the "Finish" button to
complete the configuration of the I/O connection in RSLogix 5000. At this point, download your configuration to the ControlLogix processor, then exit RSLogix 5000. To actually schedule the I/O, you will need to start RSNetWorx for ControlNet. Once RSNetWorx starts, go online to the ControlNet network
containing the ControlLogix chassis and 1203-CN1 being configured. Turn on the "Enable Edits" check box, then save the network. This causes the I/O connection created in RSLogix 5000 to be scheduled in the ControlLogix processor. After a few seconds, the I/O LED on the ControlLogix processor and the module LED on the 1203-CN1 should stop blinking and remain green. If they do not, it could indicate a number of I/O-related problems

Related Product Recommendation:

Product's Character:

After starting RSLogix 5000 and either starting a new project or opening an existing project, make sure
that you are OFFLINE with the ControlLogix processor. I/O configuration is only available when offline.
If you have not already defined the contents of your ControlLogix chassis under your project's "I/O
Configuration" folder, you will need to define the ControlNet bridge module at a minimum. Use the right
mouse button to click on the "I/O Configuration" folder, then choose "New Module" from the pop-up menu.From the dialog box that appears, choose the ControlNet bridge of the type (1756-CNB or 1756-CNBR)and series that you are using. In the next screen, you will need to name the ControlNet bridge and
indicate its position in the ControlLogix chassis (slot 0 is the leftmost).After defining the ControlNet bridge, use the right mouse button to click on the ControlNet bridge under"I/O configuration", then choose "New Module" from the pop-up menu

Series A AB
1756-L61/A Logix5561 Logix5561 Processor - 2MB AB
1756-L61/B Logix5561 Logix5561 Processor - 2MB AB
1756-L62/A Logix5562 Logix5562 Processor - 4MB Memory AB
1756-L62/B Logix5562 Logix5562 Processor - 4MB Memory AB
1756-OB16E/A Digital Fused Output Module - Series A AB
1756-PA72/A 1756-PA72 Power Supply - Series A AB
1756-PA72/B 1756-PA72 Power Supply - Series B AB
1756-PA72/C 1756-PA72 Power Supply - Series A AB
1761-CBL-PM02 Program Storage Device Cable AB
1761-L32BBB MicroLogix 1000 Unit AB
1762-IQ16 16PT 24VDC Power Supply Module AB
1762-MM1 MicroLogix Memory Module AB
1762-MM1RTC MicroLogix Memory and Real-Time Clock Module AB
1762-OF4 Analog Output Module AB
1762-OW16 16PT VAC/VDC Relay Output AB
1762-RTC MicroLogix Real-Time Clock Module AB
1764-24BWA MicroLogix 1500 Base Unit AB
1764-LRP Processor AB
1764-LSP Processor Module AB
1766-L32BWA Micro Logic Relay Output AC Power AB
1769-ECR Right End Cap AB
1769-IF4 Analog Input Module AB
1769-IQ16 Digital Input Module AB
1756-L55M12/A 1756-L55/A, 1756-M12/A Logix5555 Processor, 750KB memory, Series A AB
1756-L55M13/A 1756-L55/A, 1756-M13/A Logix5555 Processor, 1.5 MB memory, Series A AB
1756-L55M14/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 3.5 MB memory, Series A AB
1756-L55M16/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 7.5 MB memory,

The use of the product: