Allen Bradley Modules 1394-AM75 1394AM75 AB 1394-AM75 MODULE NEW in sealed box

Product Specification

Allen Bradley Modules 1394-AM75 1394AM75 AB 1394-AM75 MODULE NEW in sealed box

Product Description:

All parameters required for any given drive function will be contained within a group, eliminating the need to changegroups to complete a function.To help differentiate parameter names and display text from
other text in this manual, the following conventions will be used – Parameter Names will appear in [Brackets] – Display Text will appear in “Quotes.” Parameter information in this chapter is presented for users who have a Human Interface Module (HIM) installed. For those users without a HIM installed, the drive can be operated using the factory default values for each parameter or parameter values can be changed through the serial port. FUNCTION INDEX The Function Index shown provides a directory of various drive functions. The Page Number will direct you to the parameters associated with each function.

Related Product Recommendation:

Product's Character:

All drives come equipped with a fault LED. When the fault LED is illuminated it is an indication a fault condition exists. Refer to page 2-3 for the location of the fault LED. Once the fault is properly cleared the LED will return to an off state. Diagnostics As can be seen in Figure 2.3, there are two indicators provided to display the drive’s status condition. The DC Bus Charge Indicator is a neon bulb that will be illuminated when power is applied to the drive. The Fault Indicator is an LED that will be illuminated if a drive fault condition exists. Refer to details on How To Clear a Fault, below.How To Clear a Fault Important:Resetting a fault will not correct the cause of the fault condition. Corrective action must be taken prior to resetting the fault. To clear a fault perform one of the following:Cycle power to the drive. Cycle the stop signal to the drive. Cycle the [Clear Fault] parameter.

1747-ACN15 ControlNet Adapter Module AB
1747-ACNR15 ControlNet Adapter Module AB
1747-AIC Isolated Link Coupler AB
1747-ASB Remote I/O Adapter AB
1747-BSN Backup Remote I/O Scanner AB
1747-C11-A Programmer Cable AB
1747-DCM 1747-DCM A Direct Communication Module AB
1747-DPS2 Configurable Port Splitter AB
1747-FC Ferrite Collar AB
1747-KE Interface Module AB
1747-KFC15 ControlNet Messaging Module AB
1747-L20A/A 1747-L20A Processor Unit - Series A AB
1747-L20A/B 1747-L20A Processor Unit - Series B AB
1747-L20A/C 1747-L20A Processor Unit - Series C AB
1747-L20B/B 1747-L20B Processor Unit - Series B AB
1747-L20C/B 1747-L20C Processor Unit - Series B AB
1747-L20C/C 1747-L20C Processor Unit - Series C AB
1747-L30A/B 1747-L30A Processor Unit - Series B AB
1747-L30B/B 1747-L30B Processor Unit - Series B AB
1747-L30C/B 1747-L30C Processor Unit - Series B AB
1747-L40A/B 1747-L40A Processor Unit - Series B AB
1747-L40A/C 1747-L40A Processor Unit - Series C AB
1747-L40B/B 1747-L40B Processor Unit - Series B AB
1747-L40L 1747-L40L Processor Unit - Series A AB
1747-L511 SLC 5/01 SLC 5/01 Controller AB
1747-L511/A SLC 5/01 SLC 5/01 Controller AB
1747-L511/B SLC 5/01 SLC 5/01 Controller AB
1747-L514/A SLC 5/01 SLC 5/01 Controller AB
1747-L514/B SLC 5/01 SLC 5/01 Controller AB
1747-L524/C SLC 5/02 SLC 5/02 Controller AB

1747-L531/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L531/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/A SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/B SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/C SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L541/B SLC 5/04 SLC 5/04 Processor - Series B AB
1747-L541/C SLC 5/04 SLC 5/04 Processor - Series C AB
1747-L542/A SLC 5/04 1747-L542 Processor - Series A AB
1747-L542/B SLC 5/04 1747-L542 Processor - Series B AB
1747-L542/C SLC 5/04 1747-L542 Processor - Series C AB
1747-L543/B SLC 5/04 Processor - Series B AB
1747-L543/C SLC 5/04 Processor - Series C AB

The use of the product: