MOORE AUTOMATION LIMITED
| Payment Terms | T/T |
| Supply Ability | 10 pieces a day |
| Delivery Time | today |
| Packaging Details | new and original with factory sealed |
| Manufacture Year | 2020 |
| Con 6DS1311-8AEtrol System | IOP-D |
| Application | Nuclear Power Plant |
| lead time | in stock |
| description | DUTEC |
| Weight | 4lbs |
| Brand Name | DUTEC |
| Model Number | IOP-D |
| Certification | CO.CQ |
| Place of Origin | USA |
View Detail Information
Explore similar products
Automobile SST-DN4-104-2 Automation DCS BRAD HARRISON WOODHEAD
IRDH265-4 BENDER A-ISOMETER Insulation Monitoring Device For IT AC Systems
ARISTA ARP-2610A Fanless Industrial HMI Panel Computer VIA 667 GHz
5PP320.1043-39 5PP320.104339 B&R Power Panel PP320
Product Specification
| Payment Terms | T/T | Supply Ability | 10 pieces a day |
| Delivery Time | today | Packaging Details | new and original with factory sealed |
| Manufacture Year | 2020 | Con 6DS1311-8AEtrol System | IOP-D |
| Application | Nuclear Power Plant | lead time | in stock |
| description | DUTEC | Weight | 4lbs |
| Brand Name | DUTEC | Model Number | IOP-D |
| Certification | CO.CQ | Place of Origin | USA |
| High Light | sst pb3 clx rll ， dcs modules | ||
IOP-D DUTEC I/O PLEXER Remote I/O Controllers 16 Channel
| Brand/Manufacturer | DUTEC /USA |
| Part Number | IOP-D |
| Alternate Part Number | IOP-D |
| Description | Remote I/O Controllers |
| Dimennsions | 17.3 cm x 5.0 cm x 3.0 cm |
| Weight | 0.6kg |
Product Details
The I/O PLEXER is a complete, industrial-grade, remote I/O controller which can operate under the control of a host computer via a serial communications link, or in a STANDALONE mode, with or without supervision. By locating I/O PLEXERs near the process, the serial link eliminates the expense of lengthy, noise-prone analog sensor and actuator field wiring. Because the I/O PLEXER supports any mix of a large variety of analog and digital I/O signals, the requirements of virtually any process can be accommodated. Omni-isolated I/O modules provide 1,500 volts of isolation protection between each and every I/O line, host computer and power supplies.
Omni-isolated I/O, and the ability to mix and match individual analog or digital signals* from virtually any sensor or actuator reduces system design, installation and trouble shooting costs, as well as simplifying future maintenance and system expansion. I/O PLEXERs, complete with a built-in wide range power supply, are shipped ready to connect to your sensors, actuators, host's serial port and power. A single I/O PLEXER can handle any mix of 16 analog and/or digital I/O points. With expanders, the number of digital I/O points can be increased by up to 48. An I/O PLEXER network can serve a mix of over 1,000 analog and digital I/O lines.
Remote Operation
There are several dozen third-party HMI/MMI/SCADA software packages that have I/O PLEXER drivers for polling sensor data. Most have extensive graphics displaying the process, only a few have the capability to transmit control commands to actuators. The open architecture communication protocol instructions are readily available for those writing their own proprietary software.
STANDALONE Operation
Built-in LCFs (Local Control Functions) allow an I/O PLEXER to perform control operations with or without host supervision. LCFs include logic gates, analog compare and math, dead-band and PID control, and ladder logic. Because analog and digital modules are available on the same unit, LCFs can perform closed-loop control operations.
Physical Specifications
Power (standard) 90-264 Vac, 47-440Hz, 30 watts; 3.0A fuse; (optional: 9-18Vdc and 18-36Vdc, 25 watts each)
Operating Temperature 0-60o C
Humidity 95% non-condensing
More Products
| INDRAMAT | BTV06.1HN-RS-FW | INTERFACE | PCI-2726CM |
| INDRAMAT | CTA10.1B-000-FW | INTERFACE | PCI-8521 |
| INDRAMAT | DKC01.3-040-7-FW | JDS UNIPHASE | 2214-30SLQT |
| INDRAMAT | NAM 1.3-15 | JDS UNIPHASE | 2213-75SLRAMO72 |
| INDRAMAT | REFU RZB 01.2-UN | JOHNSON CONTROLS | LP-DIS60U00-C |
| INDRAMAT | DKC10.3-012-3-MGP-01VRS | JORDAN CONTROL | EC-0895 50B-040652-001 |
| INDUSTRIAL | ATR-4D41133 MS-DOS | KEBA | C50D01VX |
| INFRANOR | DRIVE MATE 2404 K81 | KEBA | DI260/A |
| INFRANOR GMBH | MSM0606 | KEBA | DI325/B |
| INTEGRAL SOLUTIONS | QPS-1050 QST-2002 | KEBA | DO272/A |
| INTERNIX | PROFORT80 PF80-ATHD02 | KEBA | DO321/B |
Contact Us
miya@mvme.cn(Click)
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng52
Company Details
Business Type:
Agent,Trading Company
Year Established:
2011
Total Annual:
<200000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod... Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod...
Get in touch with us
Leave a Message, we will call you back quickly!