Shijiazhuang Haobaijiu Trading Co., Ltd.
| Payment Terms | L/C |
| Delivery Time | 5-8 work days |
| Transmission | 6-speed Dual Clutch Transmission (DCT) |
| Combined Power Output | 321 kW |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Engine Type | 1.5L Turbocharged Inline-4 |
| Electric Motor | Permanent Magnet Synchronous Motor |
| Drive Type | Front-Wheel Drive |
| Dimensions (L×W×H) | 4780 mm × 1837 mm × 1495 mm |
| Vehicle Type | Plug-in Hybrid Sedan |
| Infotainment System | BYD DiLink Intelligent Connectivity System |
| Fuel Consumption | 1.4 L/100km |
| Acceleration (0-100 Km/H) | 4.3 seconds |
| Curb Weight | 1760 kg |
| Seating Capacity | 5 |
| Electric Range | 81 km (NEDC) |
| Model | BYD Qin Pro DMI |
| Brand Name | BYD |
| Model Number | BYD Qin Pro dmi |
View Detail Information
Explore similar products
BYD Qin Pro DM-i Windshield Washer Reservoir with Motor | Washer Fluid Tank
BYD Qin Pro DM-i Side Skirt Assembly (L/R) | Lower Door Trim OEM Spec
BYD Qin Pro DM-i Engine Lower Cover (Front) | Chassis Protection Plate OEM Spec
BYD Qin Pro DM-i Rear Shock Absorber Assembly | Rear Strut Multi-Link Suspension
Product Specification
| Payment Terms | L/C | Delivery Time | 5-8 work days |
| Transmission | 6-speed Dual Clutch Transmission (DCT) | Combined Power Output | 321 kW |
| Battery Type | Lithium Iron Phosphate (LiFePO4) | Engine Type | 1.5L Turbocharged Inline-4 |
| Electric Motor | Permanent Magnet Synchronous Motor | Drive Type | Front-Wheel Drive |
| Dimensions (L×W×H) | 4780 mm × 1837 mm × 1495 mm | Vehicle Type | Plug-in Hybrid Sedan |
| Infotainment System | BYD DiLink Intelligent Connectivity System | Fuel Consumption | 1.4 L/100km |
| Acceleration (0-100 Km/H) | 4.3 seconds | Curb Weight | 1760 kg |
| Seating Capacity | 5 | Electric Range | 81 km (NEDC) |
| Model | BYD Qin Pro DMI | Brand Name | BYD |
| Model Number | BYD Qin Pro dmi |
This product is specifically designed for the rear suspension system of the BYD Qin Pro DM-i (including DM dual-mode plug-in hybrid version). It is a core load-bearing component of the multi-link independent suspension connecting the rear wheel to the subframe—the rear trailing arm assembly. The rear trailing arm acts as the "skeletal joint" of the rear suspension system, firmly connecting the rear wheel to the vehicle body,承受ing longitudinal impact forces and lateral forces during driving, while cushioning road vibrations through rubber bushings. It is a critical chassis component for ensuring handling stability, ride comfort, and uniform tire wear.
The BYD Qin Pro DM-i features a multi-link independent rear suspension structure, tuned by former Mercedes-Benz chassis tuning expert Heinz Keck, balancing comfort and sporty handling. The rear suspension design follows the "chopstick suspension" structure derived from Toyota, consisting of three steel tubular arms. Unlike the flagship Tang DM which uses aluminum alloy control arms, the Qin Pro DM-i uses steel components for cost control. The Qin Pro DM-i is equipped with a 1.5T turbocharged engine + electric motor DM dual-mode plug-in hybrid system, with increased overall vehicle weight compared to the fuel version, placing higher demands on the load-bearing capacity of rear suspension components. Due to the addition of battery packs and electronic control systems in plug-in hybrid models, the chassis height is reduced and ground clearance is decreased, increasing the risk of chassis damage to some extent.
As a professional manufacturer of automotive chassis suspension parts, we develop and produce strictly according to BYD OEM technical standards, using high-strength alloy steel stamping/casting, with key stress areas optimized through finite element analysis (FEA), and ball joints and bushings featuring precision fit structures. The product passes rigorous dynamic fatigue tests, high-low temperature cycle tests, and salt spray tests, with OE numbers precisely matching the original vehicle for direct replacement of deformed, cracked, or bushing-aged original rear trailing arm assemblies.
Company Details
Business Type:
Exporter
Year Established:
March 2019
Total Annual:
1 million-2.5 million
Employee Number:
two hundred and thir
Ecer Certification：
Verified Supplier
We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha... We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha...
Get in touch with us
Leave a Message, we will call you back quickly!