Remanufactured Rear Differential Assembly LR061681 G/R 2.58 Ratio For Land Rover

This remanufactured rear differential carrier carries core OE number LR061681 / EJ324N053BB, fixed gear ratio 2.58, exclusively compatible with Land Rover Range Rover Evoque L538.

Rear differential is the core power distribution component of four-wheel drive vehicles. Worn pinion gear, broken bearing or cracked housing will trigger abnormal roaring noise, vibration during acceleration, wheel lock and power failure. Our remanufactured diff undergoes full disassembly, worn parts replacement and bench load testing, cost-effective replacement for overseas Land Rover repair shops.

Warm Reminder: This differential only fits Evoque models matched with 2.58 final drive ratio. Send complete 17-digit VIN for free ratio & compatibility verification before bulk orders to avoid mismatching differential assemblies.

1. Complete Disassembly: Fully take apart housing, pinion gear, ring gear, bearings, clutch pack and seal kits, clean all metal sludge and metal debris;
2. Fault Component Replacement: Discard worn gears, pitted bearings and aged oil seals, install brand-new high-strength bearings and OEM-spec sealing kits;
3. Gear Gap Precision Calibration: Adjust pinion & ring gear backlash strictly per factory standard to eliminate abnormal roaring noise;
4. Full Load Bench Simulation Test: Simulate road acceleration, climbing and high-speed cruising under load for noise, vibration and leak inspection;
5. Leak-Proof Sealing Treatment: Refill high-performance limited-slip differential oil, re-seal housing with high-temperature resistant sealant to prevent oil leakage;
6. Shockproof Export Packing: Each differential wrapped with anti-rust oil film + customized thick foam, reinforced export carton to protect heavy gear assembly during long sea transport.

Precision 2.58 Fixed Gear Ratio Matching

Strictly follow original OE 2.58 reduction ratio, consistent power output and fuel consumption without changing vehicle driving parameters.

Full Replacement Of Consumable Internal Parts

All bearings, oil seals and worn gear teeth replaced with brand-new industrial-grade accessories, eliminate hidden noise and oil leakage risks.

Strict Backlash Calibration To Eradicate Roaring Noise

Professional gear gap adjustment technology avoids humming, howling vibration at medium and high speeds, a common fault of cheap second-hand differential.

1:1 OEM Housing & Mounting Bracket Dimension

Aluminum housing mounting hole, axle interface and bolt position fully consistent with original unit, direct plug-and-play without modification.

Wholesale-Friendly Support Policy

MOQ only 1 unit for sample inspection, tiered discount for bulk orders, neutral logo-free packaging and private brand label customization available.

1. Lift vehicle completely, drain old differential oil fully before removing the original rear differential assembly;
2. Clean rear axle connecting flange surface, remove residual old sealant and metal grit to prevent oil leakage after installation;
3. Align mounting brackets evenly and fasten all fixing bolts with torque wrench per Land Rover factory torque standard;
4. Fill dedicated Land Rover limited-slip differential fluid after assembly, do not use ordinary AT or gear oil;
5. Complete 20km road test after installation, check for abnormal noise, vibration and oil leakage at low, medium and high speed.

Our factory focuses on remanufacturing European 4WD vehicle differential assemblies, covering Land Rover, Jaguar, BMW, Mercedes-Benz series rear and front diff carriers. We own dedicated differential remanufacturing workshop and full-function load simulation test benches. We supply fully calibrated remanufactured differential units to global European car repair wholesalers with direct factory price and flexible negotiable after-sales warranty service.

Q1: For full rear axle overhaul, do this differential assembly, axle oil seals and drive shaft universal joints share matching service life so we suggest replacing all together?

A1: Their service cycles are inconsistent. This remanufactured LR061681 diff adopts new gears and bearings with long service life, while oil seals and universal joints are quick-wear parts prone to aging and leakage. We recommend replacing all wear parts together during overhaul to avoid repeated disassembly and secondary maintenance costs for repair shops.

Q2: Does the basic quotation only cover the differential unit itself? Will the upgraded thick solid wood reinforced wooden case be provided free of charge for bulk orders?

A2: The base price only includes the remanufactured differential without wooden case cost. For bulk orders reaching our agreed quantity threshold, we offer upgraded thick reinforced wooden boxes at no extra fee. Small-batch orders still charge a small packing fee for wooden cases, and we can adjust packing solutions to cut your overall logistics expense.

Q3: Can you shoot real videos of batch differential counting and load noise testing before shipment to confirm no collision damage, oil leakage and complete accessories before delivery?

A3: Yes, we support this service fully. Before delivery, our QC team will record full videos including quantity counting, appearance inspection and bench noise testing. We send the footage to you for confirmation. We only arrange shipment after you confirm all products are intact, so you can avoid receiving defective or incomplete differential assemblies.