Used A6LF1 Transmission Oil Pump Rotor Gear Kit 46100‑3B030 For Hyundai Veracruz

1.Product Overview

This listing focuses on screened second‑hand internal rotor & gear components for A6LF1 6‑speed automatic transmission oil pump. These critical gear parts are stripped off original dismantled A6LF1 pump. Many transmission rebuild projects only require replacing worn rotor gears while the pump housing is still serviceable. This rotor gear set is a cost‑effective spare for remanufacturing transmission pumps instead of purchasing a full new pump assembly.

2.Fitment & Parameter Table

3.Inspection & Testing Standard

Each used rotor gear is inspected for tooth surface pitting, scoring, chipping and excessive clearance. We measure rotor‑to‑housing running clearance with precision feeler gauge. Any gear with deep scratch or over‑limit clearance will be rejected. All gears are carefully steam‑cleaned to eliminate old clutch debris and sludge before stock‑in. There is no hydraulic pressure test for loose rotor gears; final functional test must be completed after assembling back into pump housing.

4.Core Competitive Advantages

Original OEM dismantled rotor gears, material hardness is consistent with factory specification. Comparing with low‑cost aftermarket replacement gears which are prone to premature wear. Suitable for remanufacturers who have reusable original pump housings in stock. Short delivery time, available for bulk wholesale to transmission overhaul factories.

5.Professional Installation Guidance

Before assembling rotor gear back into pump housing, carefully inspect pump housing inner bore for scratch or grooving. Even if new rotor gear is fitted, a scored pump housing will still result in low hydraulic pressure. Lubricate rotor gears generously with transmission fluid during assembly. After full pump reassembly, perform pump pressure testing on test bench before installing back into transmission.

6.Packaging & Transportation

The rotor gear components are individually wrapped with anti‑rust paper and bubble sheet. Put into separate inner carton box to avoid collision and gear tooth damage during transit. Outer export carton with cushioning filler. Mark component name and part number on outside for easy warehouse stock management.

7.Factory Strength Introduction

Our warehouse accumulates large inventory of dismantled internal hard parts for Korean‑market automatic transmissions, including pump rotors, planet gears, clutch drums and shafts. We serve many local and overseas transmission remanufacturing plants, sorting, cleaning and screening dismantled core components in‑house. We can support mixed container loading with multiple transmission spare parts for B2B wholesale clients.

8.FAQ

Q1: Does the performance of this A6LF1 oil pump get affected when customers install upgraded heavy‑duty valve bodies on the transmission assembly?

A1: Generally speaking, the A6LF1 oil pump can work together with an upgraded heavy‑duty valve body, yet there are several critical points your downstream repair technicians need to notice. The modified heavy‑duty valve body raises the overall system working oil pressure requirement. Even if the oil pump passed our static pressure test, an aging internal clearance inside the pump may struggle to sustain continuous higher working pressure under heavy‑load driving conditions. Therefore, we strongly advise mechanics to measure actual line pressure after finishing the whole transmission rebuild. If sustained low‑pressure codes appear after road testing, you should re‑evaluate whether this existing used oil pump is suitable to match the upgraded valve‑body modification project.

Q2: Could you explain what exact checkpoints your workers complete when inspecting the oil‑pump sealing journals?

A2: During the inspection workflow for A6LF1 used oil pumps, our technicians carefully examine the sealing journals. First, visual observation searches for obvious scoring, deep grooves and corrosion marks on the journal surface. Afterwards, we run manual rotating checks to assess shaft run‑out. If noticeable circular grooves have already formed where the rubber seal rides, we directly scrap that pump instead of releasing it for export. Even shallow faint grooves will trigger extra hydraulic testing to verify whether fluid leakage will occur under simulated working pressure. This inspection procedure helps us filter out risky stock, and we aim to decrease the chance of subsequent front‑seal oil leakage complaints after the product arrives at overseas repair facilities.

Q3: When placing repeat orders, is it possible for us to request that you select pumps sourced exclusively from gasoline‑engine vehicles rather than diesel vehicles?

A3: We can prioritize picking A6LF1 oil pumps disassembled from gasoline‑engine vehicles for your repeat order, but we cannot offer one‑hundred‑percent absolute guarantee due to fluctuating raw core supply conditions. At the moment of core receiving, our warehouse team records basic vehicle information including engine fuel type wherever the dismantling data is available. When gasoline‑sourced cores are in sufficient stock, we will allocate them for your consignment and mark relevant notes on internal picking documents. Nevertheless, when gasoline cores become scarce because of market supply fluctuations, we need to communicate ahead of time whether you will accept a small quantity of diesel‑sourced pumps, or hold the order and wait for new gasoline cores to come into our inventory.