High Throughput Flexible Wheel Sorter for Warehouse Distribution Centers

Product Specification

High Throughput Flexible Wheel Sorter for Warehouse Distribution Centers

Product Overview

The wheel sorter is an automated conveying and diverting unit designed for warehouse distribution centers, regional logistics hubs, and automated parcel handling systems. It is mainly used for the continuous conveying and automatic diverting of parcels, cartons, and other regular packaged goods in outbound distribution operations.

This model uses an electric roller conveying drive unit together with a servo motor driven diverting unit. Based on the provided parameters, the sorter supports adjustable speeds of 30 / 60 / 72 / 90 / 120 / 150 m/min. Under the stated reference condition of average parcel length about 400 mm, the sorting capacity reaches 4,500–7,200 parcels/hour.

For warehouse distribution projects, this equipment is suitable where the main requirements are continuous parcel flow, multi-destination routing, flexible chute layout, and automation system integration.

Application Background

In warehouse distribution centers, the sorting line usually needs to address several practical operating conditions:

• continuous parcel release during outbound peaks
• automatic routing to multiple regions, routes, or shipping exits
• mixed parcel sizes within one system range
• different site layouts that may require different diverting directions
• linkage with WMS, WCS, barcode scanning, DWS, and conveyor control systems

For this type of project, a wheel sorter is often used as a key diverting node because it combines mainline conveying and automatic side diversion in one line section. The value of this model lies in its adjustable speed range, multi-angle diverting configuration, and practical integration capability for distribution center automation.

Technical Solution

This wheel sorter mainly consists of a main conveying section, diverting wheel modules, electric roller drive units, servo motor diverting units, powder-coated steel frame, and related control interfaces. Parcels move continuously on the main line. When a parcel reaches the target diverting position, the wheel modules change its direction and guide it to the assigned exit or chute.

The conveying section uses electric rollers rated at 60W per unit, while the diverting section uses a 220V / 50Hz / 750W single-phase servo motor. This configuration is suitable for automatic parcel turning and route allocation under matched conveyor rhythm conditions.

The machine also supports RS485 / RS232 / Ethernet / IO interfaces, making it suitable for connection with warehouse control systems, barcode scanning systems, weighing and dimensioning systems, and upstream/downstream conveyor equipment.

Transmission Features

• Sorting speed: 30 / 60 / 72 / 90 / 120 / 150 m/min, adjustable
• Sorting capacity: 4,500–7,200 parcels/hour, based on average parcel length of about 400 mm
• Diverting angles: single-side or double-side 30° / 45° / 60° / 90°
• Minimum parcel size: 90 × 90 × 10 mm
• Minimum parcel weight: 0.1 kg
• Maximum parcel size: 1200 × 1000 × 1000 mm
• Working temperature: -10℃ to 40℃
• Equipment noise: ≤75 dB
• Maximum distributed load: 60 kg/㎡
• Communication interfaces: RS485 / RS232 / Ethernet / IO

Application Boundary

This page refers to a wheel sorter for regular parcel and carton handling in automated logistics systems.

It is mainly suitable for:

• courier parcels
• cartons
• e-commerce packages
• retail distribution boxes
• other goods with relatively stable bottom surfaces

It is not automatically suitable for soft bags, heavily deformed packages, loose irregular items, or packages with unstable bottom support unless separately confirmed in the project.

The stated throughput of 4,500–7,200 parcels/hour is a reference range based on the stated condition of average parcel length about 400 mm. Actual output depends on parcel mix, spacing, induction timing, divert logic, and chute layout.

Specifications

Specification Notes

• 4,500–7,200 parcels/hour is a reference throughput range, not a fixed value for all parcel combinations
• 150 m/min is the maximum configurable line speed and should be matched with parcel spacing and divert timing
• 30° / 45° / 60° / 90° diverting angles provide flexibility for different exit arrangements
• 60 kg/㎡ is a distributed load parameter, not a confirmed maximum single-parcel weight
• Parcel compatibility should be confirmed according to bottom flatness, package rigidity, size distribution, and routing logic

Applications

Warehouse Distribution Centers
Used for automatic sorting of order parcels, store replenishment cartons, and regional delivery packages.

Regional Logistics Hubs
Suitable for parcel allocation to different regions, routes, and shipping exits.

E-commerce Centralized Outbound Systems
Used for automatic parcel sorting during order peaks and centralized outbound release periods.

Retail Supply Chain Distribution Centers
Applicable to retail order parcels, store delivery cartons, and replenishment packages.

Multi-Destination Outbound Lines
Suitable for automated outbound operations with multiple sorting chutes and multiple destination regions.

System Integration

This wheel sorter can be integrated with:

• WMS systems
• WCS systems
• barcode scanning systems
• DWS systems
• upstream induction conveyors
• downstream sort chutes and collection lines

The supported RS485 / RS232 / Ethernet / IO interfaces provide a practical basis for data coordination and equipment linkage in warehouse distribution automation projects.

Advantages

1. High Throughput for Peak Warehouse Operations
Under the stated reference condition, the system can reach 4,500–7,200 parcels/hour, which is suitable for continuous parcel handling during outbound peaks.

2. Flexible Diverting Layout
Support for single-side or double-side diverting and multiple angle options makes the sorter suitable for different chute layouts and route designs.

3. Broad Parcel Size Coverage Within the Stated Range
It can handle parcels from 90 × 90 × 10 mm up to 1200 × 1000 × 1000 mm, provided the package condition is suitable for wheel-based diversion.

4. Practical Automation Compatibility
The available interfaces support integration with warehouse control, scanning, and conveyor systems.

5. Stable Continuous Conveying Structure
The combination of electric roller conveying and servo-driven diverting is suitable for long-shift automated parcel handling.

6. Suitable for New Projects and Retrofit Lines
Its flexible structure makes it suitable for new automated distribution centers and for upgrading existing sorting lines.

How to Select

Choose by throughput target
Confirm whether the required parcel flow matches the stated reference capacity range of 4,500–7,200 parcels/hour.

Choose by parcel profile
Check actual parcel size, bottom flatness, package rigidity, and weight distribution against the supported range.

Choose by exit layout
Select single-side or double-side diverting and confirm the required angle according to chute quantity, exit direction, and available site space.

Choose by integration requirement
Confirm whether the project requires connection with WMS, WCS, barcode scanning, DWS, or other upstream and downstream equipment.

Choose by operating environment
The stated working range is -10℃ to 40℃. If the project has colder, corrosive, or special hygiene conditions, the configuration should be confirmed separately.

FAQ

1. Is this machine suitable for warehouse distribution centers?
Yes. It is suitable for automatic parcel allocation involving multiple destinations, multiple exits, and mixed parcel sizes.

2. What is the sorting capacity?
Under the stated reference condition, the machine can sort about 4,500–7,200 parcels per hour.

3. What diverting angles are supported?
It supports 30° / 45° / 60° / 90° in single-side or double-side diverting configurations.

4. What parcel types can it handle?
It is suitable for cartons, courier parcels, e-commerce packages, and other regular packaged goods with relatively stable bottom surfaces.

5. Can it integrate with automation systems?
Yes. It can be integrated with WMS, WCS, barcode scanning systems, DWS systems, and conveyor equipment.

6. Is customization available?
Yes. Color, interface type, and diverting layout can be customized according to project requirements.

7. Is it suitable for low-temperature environments?
The current configuration is designed for -10℃ to 40℃. For lower-temperature or special-condition projects, project-specific confirmation is recommended.