| Resolution | 160x160 pixels |
| Panel outline | 20.12 ±0.15 x 22.30 ±0.15 mm |
| Storage temperature | −30 to +80 °C, illustrated configuration |
| Display shape | Round |
| Panel FPC | 12 contacts; 0.50 mm pitch |
| FPC including PI reinforcement | 0.30 ±0.03 mm |
| Display mode | Normally black, illustrated configuration |
| Display interface | 4-Wire SPI |
| Operating temperature | −20 to +70 °C, illustrated configuration |
| Active-area spans | 18.0 x 18.0 mm (horizontal x vertical) |
| Display driver IC | GC9D01 |
| Display type | TFT LCD panel |
| Diagonal size | 0.71 inch |
| Panel thickness | 1.81 ±0.15 mm |
| Model Number | BY-NT071BB-C12-02 |
| Brand Name | Baiyou Display |
View Detail Information
Explore similar products
3.97 Inch 480x800 Resolution Sunlight Readable IPS LCD Display with MIPI
0.96 Inch TFT LCD Display Module with 80x160 Resolution and SPI Interface for
Nuclear Radiation Detector TFT LCD Display Module with 0.96 Inch 80x160 Pixels
High Resolution 4.96 Inch TFT LCD Display Module
Product Specification
| Resolution | 160x160 pixels | Panel outline | 20.12 ±0.15 x 22.30 ±0.15 mm |
| Storage temperature | −30 to +80 °C, illustrated configuration | Display shape | Round |
| Panel FPC | 12 contacts; 0.50 mm pitch | FPC including PI reinforcement | 0.30 ±0.03 mm |
| Display mode | Normally black, illustrated configuration | Display interface | 4-Wire SPI |
| Operating temperature | −20 to +70 °C, illustrated configuration | Active-area spans | 18.0 x 18.0 mm (horizontal x vertical) |
| Display driver IC | GC9D01 | Display type | TFT LCD panel |
| Diagonal size | 0.71 inch | Panel thickness | 1.81 ±0.15 mm |
| Model Number | BY-NT071BB-C12-02 | Brand Name | Baiyou Display |
Baiyou Display BY-NT071BB-C12-02 is a compact 0.71-inch round TFT LCD panel with 160 x 160 pixels, a GC9D01 driver and a four-wire SPI interface. It can be evaluated for small graphical indicators and control interfaces.
The drawing and connection information describe the illustrated panel arrangement. Confirm the supplied panel revision, mechanical fit, electrical limits and SPI settings before design-in.
![]()
| Model | BY-NT071BB-C12-02 |
|---|---|
| Display type | TFT LCD panel |
| Diagonal size | 0.71 inch |
| Resolution | 160x160 pixels |
| Display shape | Round |
| Display mode | Normally black, illustrated configuration |
| Active-area spans | 18.0 x 18.0 mm (horizontal x vertical) |
| Panel outline | 20.12 ±0.15 x 22.30 ±0.15 mm |
| Panel thickness | 1.81 ±0.15 mm |
| Display driver IC | GC9D01 |
| Display interface | 4-Wire SPI |
| Panel FPC | 12 contacts; 0.50 mm pitch |
| FPC including PI reinforcement | 0.30 ±0.03 mm |
| Operating temperature | −20 to +70 °C, illustrated configuration |
| Storage temperature | −30 to +80 °C, illustrated configuration |
The panel outline, active-area spans, free FPC length and reinforced contact end are separate dimensions. Preserve the full FPC route and clearances when reviewing an enclosure. The drawing specifies a normally black display and an unspecified dimensional tolerance of ±0.1 mm; specific tolerances shown beside a dimension take precedence.
![]()
The twelve-position table describes the panel FPC. The four-wire SPI reference circuit includes a separate seven-position host-side MCU header and backlight connections. Confirm supply and logic levels, rail naming, contact orientation, reset timing and initialization for the supplied configuration before wiring.
| Position | Signal name |
|---|---|
| 1 | GND |
| 2 | LEDK |
| 3 | LEDA |
| 4 | VDD |
| 5 | GND |
| 6 | GND |
| 7 | D/C |
| 8 | CS |
| 9 | SCL |
| 10 | SDA |
| 11 | RESET |
| 12 | GND |
![]()
Consider the panel for compact status indicators, small instrument readouts and graphical controls. Share your available space, FPC routing, host processor, viewing conditions and operating requirements for project review.
Quote BY-NT071BB-C12-02 and send your enclosure drawing, host interface, supply and logic levels, required UI, viewing conditions, touch needs and estimated quantity. Baiyou Display will review the matching configuration and documentation before design-in.
The BY-NT071BB-C12-02 mechanical drawing and connection information are provided in the product PDF attachment.
Company Details
Business Type:
Manufacturer
Year Established:
2009
Total Annual:
100000000-500000000
Employee Number:
300~350
Ecer Certification:
Verified Supplier
Hunan Baiyou Technology Co., Ltd. 1. Who We Are Hunan Baiyou Technology Co., Ltd. is a leading specialized manufacturer and supplier of small-to-medium-sized Liquid Crystal Displays (LCDs) based in Hunan, China. With a focus on technical precision and industrial reliability, we provide high-perfor... Hunan Baiyou Technology Co., Ltd. 1. Who We Are Hunan Baiyou Technology Co., Ltd. is a leading specialized manufacturer and supplier of small-to-medium-sized Liquid Crystal Displays (LCDs) based in Hunan, China. With a focus on technical precision and industrial reliability, we provide high-perfor...
Get in touch with us
Leave a Message, we will call you back quickly!