SET M88048/M88010 Inch Tapered Roller Bearing 33.338x68.262x22.225mm Cone And

SET M88048/M88010 is single‑row inch‑size tapered roller bearing assembly, composed of separable cone M88048 (inner ring with rollers & cage) and cup M88010 (outer ring). Dimensions:33.338 mm inner bore × 68.262 mm outer diameter × 22.225 mm total width.

This bearing can bear combined moderate‑heavy radial load and one‑direction axial thrust load. Separate design allows mounting preload adjustment during assembly. Precision machined tapered raceway and rollers ensure even stress distribution. Adopt high‑quality GCr15 bearing steel for all rolling components. Widely used for agricultural machinery, light truck axle hubs, trailer wheel assemblies, off‑road equipment, small gear reducers and general machinery requiring combined radial‑axial load capacity.

Mounting shoulder dimension drawing, preload adjustment guide and performance test reports can be provided upon customer request.

1. Separable cone‑cup construction, convenient installation, disassembly and pre‑load adjustment to meet different equipment clearance requirements.
2. Excellent combined load capacity: withstand moderate‑heavy radial load plus large unidirectional axial thrust load, ideal for agricultural and light vehicle wheel‑hub positions.
3. Precision tapered raceway and roller surface grinding, uniform contact stress, low running noise and stable performance under shock and intermittent impact load.
4. GCr15 fully quenched bearing steel, good wear‑resistance and contact‑fatigue performance, long service‑life for heavy‑duty cyclic working conditions.
5. Stamped steel cage with stable rigidity, keeps tapered rollers in correct position, reduces roller skew during high‑impact operation.
6. Standard inch series interchangeable dimension, fully interchangeable with global SET M88048/M88010 tapered roller bearing sets, direct replacement without housing modification.
7. Strictly controlled taper angle tolerance, consistent contact pattern after mounting, avoid local over‑heating and premature wear.
8. Rich custom options: P0/P6 precision grade, special anti‑corrosion coating, OEM laser marking on cone/cup, neutral export anti‑rust carton, special high‑temperature grease filling.

SET M88048/M88010 inch‑size single‑row tapered roller bearing set is heavy‑duty separable rotary spare‑part for equipment with 33.338 mm shaft requiring combined radial‑axial load support:

• Agricultural machinery wheel and transmission assemblies
• Light‑duty truck and small trailer wheel hub bearing units
• Off‑road equipment rotary support positions
• Small‑size heavy‑duty gear reducer intermediate shaft supporting points
• General industrial equipment with unidirectional axial thrust load

Aftermarket interchangeable inch‑series SET M88048/M88010 tapered roller bearing

Moderate‑heavy‑load impact‑resistant bearing solution for agricultural‑equipment manufacturers, light‑vehicle OEMs and machinery maintenance bulk‑procurement.

• 25‑years manufacturing experience of inch‑size single‑row tapered roller bearings including SET M88048/M88010.
• SET M88048/M88010 full‑set dimensionally interchangeable with international‑standard counterparts, consistent dynamic/static load rating, taper angle and dimensional tolerance standards.
• Complete OEM & ODM custom service covering multi‑precision‑grade, surface anti‑corrosion treatment and special‑temperature‑resistant grease filling.
• Strict pre‑shipment QC: GCr15 raw‑material metallurgy & hardness inspection, roller sorting screening, long‑cycle impact rotation aging test, contact‑pattern inspection after assembly.
• Professional tapered‑roller‑bearing engineering team provides one‑on‑one combined‑load calculation, pre‑load adjustment guidance and installation torque tips within 24 working hours.
• Large‑scale production workshop offers competitive factory‑direct bulk‑wholesale price, stable long‑term supply for global agricultural, light‑truck and general‑machinery spare‑part buyers.

We specialize in inch‑series separable tapered roller bearings, precise taper‑angle control, universal interchangeable dimensions, pursuing win‑win long‑term cooperation with agricultural‑and‑light‑vehicle transmission‑equipment suppliers.

• Raw‑material chemical‑composition, internal‑defect and hardness inspection for GCr15 cone, cup and tapered roller blanks
• Precision turning, multiple stress‑relief tempering, ultra‑precision grinding for tapered raceway and roller surfaces
• Tapered roller high‑temperature quenching, mirror‑polishing and high‑precision auto‑sorting production‑line
• Stamped‑steel cage stamping & riveting, cone‑cup matching inspection, contact‑pattern checking assembly process
• Targeted performance‑tests: SET M88048/M88010 long‑cycle heavy‑impact rotation aging test, combined radial‑axial load fatigue wear‑detection
• Full re‑check for dimension‑tolerance, taper‑angle, surface‑finish before anti‑rust‑oil coating and export moisture‑proof‑carton packing.

Each production batch of SET M88048/M88010 undergoes wheel‑hub simulation cyclic‑rotation test to guarantee stable heavy‑load anti‑impact rotary‑support performance for axle systems.

If you need SET M88048/M88010 inch‑size tapered roller bearing sets for agricultural‑machine / light‑truck axle manufacturing, heavy‑equipment‑assembly and machinery‑maintenance bulk‑matching, send your purchase‑inquiry directly.

Full professional supporting‑services after inquiry submission:

• Official formal quotation reply within 24 working‑hours
• One‑on‑one radial‑&‑axial‑combined‑load calculation, pre‑load adjustment and installation technical‑support from professional‑bearing‑engineers
• Custom‑bearing‑performance‑upgrade options including multi‑precision‑grade and special‑temperature‑resistant‑grease
• Favorable factory‑direct bulk‑wholesale price for large‑volume SET M88048/M88010 single‑model‑orders

Please provide purchase‑quantity, working‑conditions (heavy impact / vibration / operating temperature) to get detailed official‑quotation‑documents.