Product Specification

QR Code Recognition Swing Gate Turnstile Smart Campus Visitor Access 550mm Wide Channel

Product Description

Visitor access in smart campuses, office towers and serviced apartment lobbies still depends on paper sign-in sheets and temporary access cards. Both slow the lobby down and both leave a security gap once a card is mislaid. The QR code recognition swing gate turnstile replaces that routine with appointment-linked digital passes: a visitor books online, receives a time-limited QR code, and the reader verifies the code and opens the acrylic swing arm in 0.5 seconds, with no reception desk involvement and no plastic card to hand back.

Every QR code carries a validity window stored in the visitor management platform, so an expired or already used pass is rejected at the reader instead of being waved through. Four pairs of infrared sensors check that exactly one person crosses the channel before the arm resets, which stops tailgating at busy peak hours. The lane is built on a 304 stainless steel frame (or painted 201 stainless steel) with a 550mm to 850mm channel width, IP43 or IP54 protection grade, and it runs indoors or outdoors between -30℃ and 70℃.

Employees can keep using IC or ID cards, face or fingerprint terminals, NFC phones or a keypad on the same swing barrier gate, so a single lane serves both visitor traffic and staff traffic. RS485 and TCP/IP communication let the gate report every passage record back to the property management system, and the onboard LCD screen allows parameter setup in multiple languages without a laptop on site.

Product Features & Advantages

1. Half-Second QR Code Verification

The QR code recognition swing gate turnstile verifies a visitor pass in 0.5 seconds and clears 30 people per minute, or up to 40 people per minute in normally open mode. Contactless scanning keeps the lobby queue moving at morning peak without a staff member checking screens.

2. Appointment-Linked Pass Validity

Each QR code is tied to a booking record and a time slot. Once the slot ends the code stops working at the reader, so a screenshot forwarded to someone else cannot be reused later. Passage records are written back to the visitor management platform for audit and reporting.

3. Anti-Tailgating Infrared Detection

Four pairs of infrared sensors monitor the channel and confirm single-person passage before the swing arm closes. Unauthorised entry or a second person following through triggers the audible and visual alarm, which gives the security desk a clear signal instead of a silent breach.

4. One Lane for Visitors and Staff

Alongside QR code scanning, the swing barrier gate accepts RFID/IC/ID cards, face or iris recognition, fingerprint, mobile NFC, password entry and remote door release. A single cabinet therefore covers visitor flow, staff attendance and contractor access without extra hardware.

5. Stainless Steel Build for Continuous Duty

The 304 stainless steel passage frame with acrylic swing arms is rated for at least 5 million passages, draws 100W at AC220V, and is finished to suit premium lobby interiors. Built-in fault self diagnosis and a multilingual LCD setting board keep daily maintenance simple.

Frequently Asked Questions

1. Which sites suit a QR code recognition swing gate turnstile?

Smart campuses, office towers, high-end residential communities, exhibition halls and serviced apartment lobbies - anywhere visitor traffic needs a recorded, appointment-based entry rather than a paper register.

2. What does a visitor actually do at the gate?

The visitor finishes online registration, receives a QR code by message or email, and holds it under the reader. The swing arm opens in 0.5 seconds once the code matches a valid booking and has not expired.

3. Can the gate work with our existing visitor or access platform?

Yes. The controller exposes relay switch, 12V level and 12V pulse signals (pulse width above 100ms) plus RS485 or TCP/IP, so it connects to common visitor management and property management software.

4. What happens during a power failure?

The emergency release logic can be configured to unlock the swing arms automatically when power drops, so the lane opens for evacuation and the fire alarm loop stays clear.

5. How is the reader maintained?

Wipe the scan window with a dry soft cloth, keep the channel clear of dust and check the infrared sensors monthly. The controller reports faults on its own LCD panel, which keeps service visits short.