Neware Technology Limited
| Payment Terms | T/T |
| Supply Ability | 50 Units Per Month |
| Delivery Time | 45 working days |
| Packaging Details | Wooden Box , W - D - H , 1300 - 800 - 1800 mm |
| Discharge Voltage | 50V - 500V |
| Discharge Current | 0.2A - 100A |
| precision | 0.05 percent of FS |
| Stability | 0.1 percent of FS |
| Max cycles | 65535 |
| Max steps | 254 |
| Brand Name | Neware |
| Model Number | CTE-6001n-500V100A-IG |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
100V 200A Regenerative Battery Pack Test System
60V60A Channel Parallel Regenerative Battery Pack Test System CE Listed
24bit Electric Crane 60V 200A Regenerative Battery Pack Test System
500V300A Battery Cell Test Equipment , Energy Feedback High Rate Discharge Cell
Product Specification
| Payment Terms | T/T | Supply Ability | 50 Units Per Month |
| Delivery Time | 45 working days | Packaging Details | Wooden Box , W - D - H , 1300 - 800 - 1800 mm |
| Discharge Voltage | 50V - 500V | Discharge Current | 0.2A - 100A |
| precision | 0.05 percent of FS | Stability | 0.1 percent of FS |
| Max cycles | 65535 | Max steps | 254 |
| Brand Name | Neware | Model Number | CTE-6001n-500V100A-IG |
| Certification | CE | Place of Origin | China |
| High Light | 500V battery charge discharge tester ，4 channels battery charge discharge tester ，4 channels battery pack test equipment | ||
Neware 500V100A Regenerative Battery Pack Testing equipment and Charge Discharge Tester
The CE - 6000 series battery testing system supports channels to expand .
Modularization - Each module is 4 channels 120V50A . Expandable for 8 channels / 12 channels, etc , in one cabinet .
Parallelled , Up to 4 channels to be parallelled connection , can reach 200A in one module .
Regeneration - The regenerative function is included to greatly reduce power consumption during the discharge test .
Communication - Able to log parameters from BMS , Chamber, I / O signals as a condition for cut - off or protection during testing . Support CANbus , RS485 protocol , SMbus , I2C.
Simulation - Because of high dynamic response speed , it supports the profile dynamic simulation , such as DCIR , HPPC , NEDC , FUDC , and other tests .
| Charge | Charge modes | Constant current , Constant voltage , Constant current and voltage , Constant power |
| Cut - off condition | Main channel - Voltage , Current , delta Time , Capacity , - delta V | |
| Discharge | Discharge modes | Constant current , Constant voltage , Constant power , Constant resistance |
| Cut - off condition | Main channel - Voltage , Current , delta Time , Capacity |
| Pulse | Charge | Constant current , Constant power |
| Discharge | Constant current , Constant power | |
| Min pulse width | 100ms | |
| Pulse counts | Each pulse step supports 32 different pulses | |
| Chg and Dschg switch | Supported | |
| Cut - off condition | Voltage , Time | |
| Simulated Condition | Charge modes | Constant current , Constant power |
| Discharge modes | Constant current , Constant power | |
| Cut - off condition | Time , Line Number | |
| Continuous switching Chg and Dischg | One simulation step can realize a continuous switching from charging to discharging | |
| Limit step number | 1 million | |
| Cycle | Max cycles | 65535 |
| Max steps | 254 | |
| Cycle nest | Nested loop Function , Max Support 3 Layers | |
| Protection | Software protection | Power - off data protection |
| Off - line operation mode | ||
| User - defined protection conditions , such as upper and lower limited current / voltage , delay time , temperature , etc . | ||
| Charge and discharge efficifency | more than 90 percent | |
| Protection | Anti - surge , anti - islanding , over - under - frequency , over - under - voltage , phase - loss protection , etc. | |
| Protection grade | IP20 | |
| Channel parallel | supported , Parallel channels do not support pulse and simulation testing | |
| Energy feedback | The discharge energy can be fed back to the power grid | |
| Channels feature | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure |
| Channels control mode | Independent control |
| Noise | ≤65dB |
| Database | MySQL |
| Communication | TCP/IP |
| Operating system | Windows 7/8/10 64bit |
| Data export | EXCEL, TXT |
| Min. disk drive | 500GB |
| Communication port | Ethernet port |
Company Details
Business Type:
Manufacturer
Year Established:
1998
Total Annual:
250000000-350000000.00
Employee Number:
350~500
Ecer Certification：
Active Member
Neware is a leading battery testing system provider headquartered in Shenzhen, China. Neware has been committed to providing high performance battery testing system since 1998. Neware Battery Charge and Discharge Test System, ranging from μA single cell applications up to 1MW packs, is a ... Neware is a leading battery testing system provider headquartered in Shenzhen, China. Neware has been committed to providing high performance battery testing system since 1998. Neware Battery Charge and Discharge Test System, ranging from μA single cell applications up to 1MW packs, is a ...
Get in touch with us
Leave a Message, we will call you back quickly!