KingPo Technology Development Limited
| Payment Terms | T/T |
| Supply Ability | 200 pcs per month |
| Delivery Time | 7 working days |
| Packaging Details | safety carton pack or plywood box |
| number of cycles | 100 |
| holding time,th, at Tmax | 1 h or until DUT temperature stabilization is reached |
| transition duration | <20 s |
| test fluid | de-ionized water |
| water temperature | 0 °C to +4 °C |
| water flow | between 3 l and 4 l per 3 s (splash duration) |
| Brand Name | kingpo |
| Model Number | ISO 16750-4-figure4 |
| Certification | iso9001 ce |
| Place of Origin | china |
View Detail Information
Explore similar products
UL Rain Test Water Spray Nozzle.UL60507-ENGL 1999 ANSI Z21.58 CSA4.3-2004 Water
IPX1-6 Ingress Protection Test Equipmnent IEC60529 Waterproof Degrees Test
Ipx9k Iec 60529 Ip Stainless Steel Nozzle For Rain Test Chamber , φ24mm Diameter
IEC 60529 IP Testing Equipment , IPX1 IPX2 Movable Rain Drip Box Ingress
Product Specification
| Payment Terms | T/T | Supply Ability | 200 pcs per month |
| Delivery Time | 7 working days | Packaging Details | safety carton pack or plywood box |
| number of cycles | 100 | holding time,th, at Tmax | 1 h or until DUT temperature stabilization is reached |
| transition duration | <20 s | test fluid | de-ionized water |
| water temperature | 0 °C to +4 °C | water flow | between 3 l and 4 l per 3 s (splash duration) |
| Brand Name | kingpo | Model Number | ISO 16750-4-figure4 |
| Certification | iso9001 ce | Place of Origin | china |
| High Light | rain test equipment ，salt spray test chamber | ||
ISO 16750-4 Figure 4 Stainless Steel Test Set - Up For Splash Water Test Jet
5.4.2 Splash water test
5.4.2.1 Test method
Heat the DUT in a hot air oven at Tmax for the specified holding time,th. Then splash the DUT with ice water for 3 s. If the DUT is splashed in the vehicle from only one direction, splash it from this direction only while it is in an as-installed position. If the equipment is splashed from various directions in the vehicle, then these directions shall be taken into account. In this case, use a new DUT for each splash direction. The width of the splash directed at the DUT shall always be greater than the width of the DUT. If the DUTs to be splashed prove too big for one jet, arrange several jets in a row to produce a line of splash impact on the DUT. See Figures 4 to 6.
Test parameters include:
⎯number of cycles: 100;
⎯holding time,th, at Tmax: 1 h or until DUT temperature stabilization is reached;
⎯transition duration:<20 s (for manual transition of DUT between temperature storage and splashing);
⎯test fluid: de-ionized water;
⎯water temperature: 0 °C to +4 °C;
⎯water flow: between 3 l and 4 l per 3 s (splash duration);
⎯distance between jet and DUT surface: (325±25) mm (water shall be applied over the complete width of the DUT);
⎯operating modes: see Figure 5;
⎯orientation of the DUT: as in the vehicle.
Packaging
Company Details
Business Type:
Manufacturer,Trading Company,Exporter,Seller
Year Established:
2000
Total Annual:
8000000-1500000
Employee Number:
50~200
Ecer Certification：
Verified Supplier
KingPo Technology Development Limited is a global leader in manufacturing battery testing machines, environmental test chambers, and safety compliance testing equipment. As an industry pioneer, we provide one-stop solutions for laboratories worldwide, spanning R&D, testing, production, and after... KingPo Technology Development Limited is a global leader in manufacturing battery testing machines, environmental test chambers, and safety compliance testing equipment. As an industry pioneer, we provide one-stop solutions for laboratories worldwide, spanning R&D, testing, production, and after...
Get in touch with us
Leave a Message, we will call you back quickly!