KingPo Technology Development Limited
| Payment Terms | T/T |
| Supply Ability | 200 pcs per month |
| Delivery Time | 7 working days |
| Packaging Details | safety carton pack or plywood box |
| number of cycles | 100 |
| holding time,th, at Tmax | 1 h or until DUT temperature stabilization is reached |
| transition duration | <20 s |
| test fluid | de-ionized water |
| water temperature | 0 °C to +4 °C |
| water flow | between 3 l and 4 l per 3 s (splash duration) |
| Brand Name | Kingpo |
| Model Number | ISO 16750-4-figure4 |
| Certification | Calibration Certificate (ISO17025) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60529 IP Testing Equipment Ingress Protection Chamber
JIS D 0203 Method Of Moisture Rain And Spray Test For Automobile Parts -R1/R2
Ipx9k Iec 60529 Ip Stainless Steel Nozzle For Rain Test Chamber , φ24mm Diameter
Nozzle IP Testing Equipment Parts According To IEC60529 Calibration Certificate
Product Specification
| Payment Terms | T/T | Supply Ability | 200 pcs per month |
| Delivery Time | 7 working days | Packaging Details | safety carton pack or plywood box |
| number of cycles | 100 | holding time,th, at Tmax | 1 h or until DUT temperature stabilization is reached |
| transition duration | <20 s | test fluid | de-ionized water |
| water temperature | 0 °C to +4 °C | water flow | between 3 l and 4 l per 3 s (splash duration) |
| Brand Name | Kingpo | Model Number | ISO 16750-4-figure4 |
| Certification | Calibration Certificate (ISO17025) | Place of Origin | China |
| High Light | rain test equipment ，salt spray test chamber | ||
ISO 16750-4 Figure 4 Stainless Steel Test Set - Up For Splash Water Test Jet
5.4.2 Splash water test
5.4.2.1 Test method
Heat the DUT in a hot air oven at Tmax for the specified holding time,th. Then splash the DUT with ice water for 3 s. If the DUT is splashed in the vehicle from only one direction, splash it from this direction only while it is in an as-installed position. If the equipment is splashed from various directions in the vehicle, then these directions shall be taken into account. In this case, use a new DUT for each splash direction. The width of the splash directed at the DUT shall always be greater than the width of the DUT. If the DUTs to be splashed prove too big for one jet, arrange several jets in a row to produce a line of splash impact on the DUT. See Figures 4 to 6.
Test parameters include:
⎯number of cycles: 100;
⎯holding time,th, at Tmax: 1 h or until DUT temperature stabilization is reached;
⎯transition duration:<20 s (for manual transition of DUT between temperature storage and splashing);
⎯test fluid: de-ionized water;
⎯water temperature: 0 °C to +4 °C;
⎯water flow: between 3 l and 4 l per 3 s (splash duration);
⎯distance between jet and DUT surface: (325±25) mm (water shall be applied over the complete width of the DUT);
⎯operating modes: see Figure 5;
⎯orientation of the DUT: as in the vehicle.
Packaging
Company Details
Business Type:
Manufacturer
Year Established:
2000
Employee Number:
50~200
Ecer Certification：
Verified Supplier
Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cos... Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cos...
Get in touch with us
Leave a Message, we will call you back quickly!