KingPo Technology Development Limited

China,Hong kong ,Hong kong
Verified Supplier

Send Email



Leave a Message

we will call you back quickly!

Submit Requirement

Home>
Electrical Safety Test Equipment>
IEC60335-1 clause 25.14 Figure 8 Power Cord Flexing Test Apparatus Testing the

China IEC60335-1 clause 25.14 Figure 8 Power Cord Flexing Test Apparatus Testing the





IEC60335-1 clause 25.14 Figure 8 Power Cord Flexing Test Apparatus Testing the

MOQ： 1
Price： To be quoted
Get Latest Price


Packaging Details	Packing: safety plastic tool box or plywood package.
Payment Terms	100% T/T in advance
Delivery Time	30 working days
Power Supply	AC220V 50HZ
Angle of bending	0-360° adjustable
Bending rate	0~60rpm (PLC control)
Test Station	1 working station (it is customizable)
weight	5N,10N*1
Maximum load bearing of samples	30kg
Brand Name	KINGPO
Certification	iso9001
Place of Origin	DONGGUAN
Model Number	KP-8820

View Detail Information

Contact Now Ask for best deal

Get Latest Price Request a quote

Explore similar products

IEC60335-2-84 Ammonia and Hydrochloric Acid Test Chamber 0.055% Ammoniac 0

Get Latest Price
Aluminum CAN/CSA-C358-03 Oven And Cooktop Test Blocks

Get Latest Price
IEC 60335-2-23 Flexing Test Apparatus For Swivel Connection - Skin Or Hair Care

Get Latest Price
IEC60238-Figure 36 Dielectric Strength Test Equipment For Testing Surge Strength

Get Latest Price

Product Details
Company Details

Product Specification


Packaging Details	Packing: safety plastic tool box or plywood package.	Payment Terms	100% T/T in advance
Delivery Time	30 working days	Power Supply	AC220V 50HZ
Angle of bending	0-360° adjustable	Bending rate	0~60rpm (PLC control)
Test Station	1 working station (it is customizable)	weight	5N,10N*1
Maximum load bearing of samples	30kg	Brand Name	KINGPO
Certification	iso9001	Place of Origin	DONGGUAN
Model Number	KP-8820
High Light	abrasion resistance test machine ，tv signal tester

IEC60335-1 clause 25.14 Figure 8 Power Cord Flexing Test Apparatus Testing the Protection Capability of Cord

Product information:

This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it enters the appliance. This does not apply for appliances with automatic cord reels.

Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it enters the appliance.

Note 1: This does not apply to appliances with automatic cord reels that are tested by 22.16 instead.

Compliance is checked by the following test that is carried out on an apparatus having an oscillating member as shown in figure 8.

The part of the appliance that includes the inlet opening is fixed to the oscillating member so that, when the supply cord is at the middle of its travel, the axis of the cord where it enters the cord guard or inlet is vertical and passes through the axis of oscillation. The major axis of the section of flat cords shall be parallel to the axis of oscillation.

The cord is loaded so that the force applied is:

10 N, for cords having a nominal cross-sectional area exceeding 0.75 mm²;

5 N, for other cords.

The distance X, as shown in figure 8, between the axis of oscillation and the point where the cord or cord guard enters the appliance, is adjusted so that when the oscillating member moves over its full range, the cord and load make the minimum lateral movement.

The oscillating member is moved through an angle of 90° (45°on either side of the vertical), the number of flexings for type Z attachments being 20000 and for other attachments 10000. The rate of flexing is 60 per minute.

Note 2: A flexing is one movement of 90°.

The cord and its associated parts are turned through an angle of 90°after half the number of flexings, unless a flat cord is fitted.

During the test, the conductors are supplied at rated voltage and loaded with the rated current of the appliance.Current is not passed through the earthing conductor.

The test shall not result in:

1. A short circuit between the conductors;

2. A breakage of more than 10% of the strands of any conductor;

3. Separation of the conductor from its terminal;

4. Loosening of any cord guard;

5. Damage to the cord or cord guard which could impair compliance with this standard;

6. Broken strands piercing the insulation and becoming accessible.

Technical parameters:

Power Supply	AC220V 50HZ
Angle of bending	0-360° adjustable
Bending rate	0~60rpm (PLC control)
Test Station	1 working station (it is customizable)
Maximum output voltage	0-240V
Maximum output power	3KW
Maximum current output	12A
Maximum load bearing of samples	30kg
The load weight	5N,10N*1
Counter	0~999999
It is equipped with sample clamp or it is customized according to the sample

Company Details

Bronze Gleitlager

Bronze Sleeve Bushings

and

Graphite Plugged Bushings

from Quality China Factory



Business Type:

Manufacturer,Trading Company,Exporter,Seller 


Year Established:

2000 


Total Annual:

8000000-1500000


Employee Number:

50~200 


Ecer Certification：

Verified Supplier 

KingPo Technology Development Limited is a global leader in manufacturing battery testing machines, environmental test chambers, and safety compliance testing equipment. As an industry pioneer, we provide one-stop solutions for laboratories worldwide, spanning R&D, testing, production, and after... KingPo Technology Development Limited is a global leader in manufacturing battery testing machines, environmental test chambers, and safety compliance testing equipment. As an industry pioneer, we provide one-stop solutions for laboratories worldwide, spanning R&D, testing, production, and after...

+ Read More