KingPo Technology Development Limited

China,Hong kong ,Hong kong
Verified Supplier

Send Email



Leave a Message

we will call you back quickly!

Submit Requirement

Home>
Plug Socket Tester>
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2

China AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2





AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2

MOQ： 1
Price： To be quoted
Get Latest Price


Payment Terms	T/T
Supply Ability	2 units per month
Delivery Time	30 working days
Packaging Details	plywood box
Standard	AS/NZS 3112:2011
Clause	2.13.7.2
test sample	pin
interval between successive cycles	10 s
duration of one cycle	60 s
warranty	1 year
Brand Name	kingpo
Certification	iso9001 ce
Place of Origin	china
Model Number	AS/NZS 3112:2011 Clause 2.13.7.2

View Detail Information

Contact Now Ask for best deal

Get Latest Price Request a quote

Explore similar products

UL498 Plug Socket Tester American Standard Plug And Socket Gauge

Get Latest Price
BS1363-1:1995 Figure 5 | Gauge For Plug Pins | British Standard BS1363 Figure 5

Get Latest Price
IEC60884-1 Figure 44 Clause 19 Temperature Rise Test Equipment

Get Latest Price
UL 2251 IEC 62196 Charging Gun Endurance Tester 220V

Get Latest Price

Product Details
Company Details

Product Specification


Payment Terms	T/T	Supply Ability	2 units per month
Delivery Time	30 working days	Packaging Details	plywood box
Standard	AS/NZS 3112:2011	Clause	2.13.7.2
test sample	pin	interval between successive cycles	10 s
duration of one cycle	60 s	warranty	1 year
Brand Name	kingpo	Certification	iso9001 ce
Place of Origin	china	Model Number	AS/NZS 3112:2011 Clause 2.13.7.2
High Light	AS/NZS 3112 Pin Bending Tester ，Calibration Certificate Pin Bending Tester ，Clause 2.13.7.2 Pin Bending Tester

AS/NZS 3112:2011 Clause 2.13.7.2 Force for pin bending tester

2.13.7.2 Pin bending test

All flat pins of plugs rated up to and including 15 A shall be subjected to a pin bending test.

Three sample plugs not subjected to any previous tests shall be tested as follows:

Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test.

The pins shall be straight at the beginning of the test. If there is any doubt about the straightness of the pin, it shall be checked by the appropriate plug gauge shown in Appendices A, B or F.

The point of application of the force shall be 14 ±0.5 mm from the face of the plug.

The direction of the force shall be along a line parallel to the face of the plug.

Active and neutral pins shall be forced towards the centroid of the plug and then back to the starting point. On the first sample plug, any earth pin shall be forced but in one direction only and then forced back to the starting point. On the second sample plug, any earth pin shall be forced in the opposite direction to that used for testing the first sample plug. On the

third sample plug, any earth pin shall be forced in the direction that gave the least favourable result during testing of the first two sample plugs.

NOTE: This is intended to simulate damage that may occur when a plug is walked on and bent

pins are straightened.

The distance moved from the point of application shall be 7.5 ±0.3 mm, and then the pin shall be forced back to the starting point. Any ‘spring-back’ is ignored.

NOTE: ‘Spring-back’ means that the pin is allowed to move back to a position less than the travel distance, when the force is removed.

The travel from the starting point to the end point (7.5 mm) and back to the starting point is one cycle (i.e. one cycle is two separate movements).

The speed of deflections shall be a maximum of 50 mm/s, without intentional delay between consecutive movements within each cycle.

The interval between successive cycles shall be a minimum of 10 s.

The duration of one cycle shall be a maximum of 60 s.

The pins shall be tested for 20 complete cycles.

After the tests the pins shall be inspected with normal or corrected to normal vision.The pin shall not be broken off.

NOTE: Cracking of the pin, less than full thickness, is not deemed to be broken off.If in doubt, pins shall be disassembled from the plug and any insulation removed.

NOTE: In some cases the break may be below the face of the plug or the insulation may hold the broken pieces together, retaining electrical contact.

Figure 2.8 Application Of Force For Pin Bending Test AS / NZS 3112

Figure 2.1	dimensions of plugs
Figure 2.2	apparatus for flexing test
Figure 2.3	form of pin
Figure 2.4	dimensions of insulation on insulated live pins
Figure 2.5	pressure test apparatus for insulation on insulated plug pins at high temperature
Figure 2.6	impact test apparatus for insulation on insulated plug pins at low temperature
Figure 2.7	abrasion test apparatus for insulation on insulated pin plugs
Figure 2.8	application of force for pin bending test
Figure 2.9	mounting of plug for temperature rise test
Figure 2.10	pin clamping unit for the temperature rise test

Company Details

Bronze Gleitlager

Bronze Sleeve Bushings

and

Graphite Plugged Bushings

from Quality China Factory



Business Type:

Manufacturer,Trading Company,Exporter,Seller 


Year Established:

2000 


Total Annual:

8000000-1500000


Employee Number:

50~200 


Ecer Certification：

Verified Supplier 

KingPo Technology Development Limited is a global leader in manufacturing battery testing machines, environmental test chambers, and safety compliance testing equipment. As an industry pioneer, we provide one-stop solutions for laboratories worldwide, spanning R&D, testing, production, and after... KingPo Technology Development Limited is a global leader in manufacturing battery testing machines, environmental test chambers, and safety compliance testing equipment. As an industry pioneer, we provide one-stop solutions for laboratories worldwide, spanning R&D, testing, production, and after...

+ Read More

Reach Us
KingPo Technology Development Limited
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
https://www.batterytestingmachine.com/

Send Email

Leave a Message, we will call you back quickly!