Durable CCT Composite Cycle Corrosion Test Chamber for Temperature Range of 10

Product Specification

Product introduction:

CCT composite cycle corrosion test chamber can be traditional salt spray, dry and wet alternating mixed salt spray test and most of the automotive cycle corrosion test.

Specifically for the specification requirements will be salt spray, condensation humidity, relative humidity control, air drying, brine immersion, automatic spray, rotating spray, low temperature and other functional modes of development and design assembly, testing metal parts swim coating parts, paint and paint parts, electronic parts, etc.

Product features.

1. The box is a comprehensive anti-corrosion structure, using multi-layer glass fiber polyester resin box, corrosion-resistant materials.

2. Touch screen programmable controller, can be operated in English and Chinese, data acquisition

3. Specific nozzles can evenly drop the solution to spray on the specimen, and the solution flow rate can be adjusted by itself.

4. Nozzles are mounted on a separate module, which can be easily removed when the atomization function is enabled

5. Large spraying solution area, high flow rate, and shorter spraying time than the salt spray function under the atomization solution.

6. Spray on/off time can be programmed directly for better corrosion control

7. Standard test sample holder is provided to accommodate flat samples, and for oversized and overweight 3D samples (e.g. automotive wheel perseverance, engine parts, etc.), a grill kit with equal height of the holder can be used, and the box structure is robust to distribute the load evenly.

Specification table

Environment mode

Drying mode Temperature control + cooling mode Condensation mode

Spraying mode Water Mist Mode

Meet the test requirements of different standards such as functionality

FAQ
Q :How to provide after sales service?
A:If customers need our engineers on site service, the company only need pay the ticket accommodation to our engineers, service is for free.
If Products still can't use after our engineers repair, we will produce a new test chamber (same as the old one) to our customers with no charge.
You can contact our local service center in overseas market to get service and product.

Q :Do you have an agent?
A:Currently we have agents in Europe, Asia, North America, South Africa, and can provide sales and technical services.

Q :Can we come to your factory to study and train?
A:Welcome to our factory for study and training, we provide this service free of charge.

Q :Can you send engineers to our company?
A:Yes, sure. We will communicate in advance to facilitate the bringing of tools and components

Q :Can I install and debug calibration on site?
A :Yes, we can send technicians and engineers to the customer site for installation, commissioning and calibration.

Q :What are the modes of transportation?
A :Air, sea, rail, multimodal transport.

Q :What is the packaging?
A :Standard export wooden box packaging, solid and firm.

Q :How do you calibrate the equipment?
A :We have our own calibration and third-party calibration such as ISO17025

Q: Is there a door to door service?
A :Yes, there is door to door service. We will arrange a one-stop service.

Q :What are the payment methods?
A Payment methods are T/T, Paypal, L/C, VISA

Q:How long is the warranty period?
A :Warranty period is 3 years, free service for life

Q :Can you ship quickly?
A :Our delivery period is 3-21 days. Some of the hot-selling equipments are in stock and can be shipped within 1-3 days.