Corrugated 45 Degree Steep Rubber Sidewall Belt Conveyor

Product Specification

Continuous Transporting Corrugated 45 Degree Steep Rubber Sidewall Belt Conveyor Machine

Advantages And Features

• Adopt corrugated flang belt, the max angle can be 90 degree, save place;
• Simple structure and easy maintenance;
• Sidewall belt conveyor have two horizontal parts , can connect with other machine easily;

• No spillage at the steep angle when transfer bulk material.

Feature

Sidewall belt conveyor adopts conveyor belt with wave sides and baffle, can transport material in large angle up to vertical.
Sidewall belt conveyor is continuous transporting equipment of loose bulk materials such as coke, coal, limestone, sand and gravel. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle.
Sidewall belts are used to convey material up inclines. The sidewall increases the carrying capacity of the belt and prevents product from falling off the edges of the belt. Hot vulcanization provides a 5x greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt. Greater adhesion also prevents the sidewall from lifting and separating from the base belt, extending the belt life.
Structure info.(Including Base Materials)
Sidewall belt conveyor mainly consists of construction, conveyor roller, conveyor drum, conveyor belt and driven device etc.
Construction : carbon steel, also can be stainless steel.
Conveyor roller : carbon steel, also can be stainless steel.
Conveyor drum :carbon steel, also can be stainless steel.
Conveyor belt : rubber.

Technical parameters for reference

 Remarks: the below capacity is based on coal  and speed 1m/s to caculated for reference.

Selection Conditions

♦Material to be processed: _____

♦Max. granule size of the feeding material: _____mm

♦Handling capacity (Ps. It means the total material capacity feeding from the inlet): _____t/h

♦Percentage of Max. granule in material:_________%

♦Upstream equipment (Ps. It means what kind of Equipment is used to feed the material):____

♦Bulk Density: _____t/m3

♦Material temperature: _____℃;

♦Downstream equipment (Ps. It means what kind of equipment is used to discharge the material): _____

♦Water content:____%

♦Material is corrosive or not: ____ (Ps. Yes or No)

♦Working power supply: _____V ______HZ

♦Material is sticky or not: ____ (Ps. Yes or No)

♦Working environment is indoor or outdoor: ______________ 　

♦Working environment temperature: ______ ℃

♦Please refer to the following picture and provide the relevant parameters:L1____m, L2___m, H___m, α____°

Operation regulation and maintenance

• Belt conveyor should be operated in according to design requirement.

• Belt conveyors are not allowed to overload run.

• All safe alarming should be in good condition.

• Walkway of emergency switch should be free. The switch should be regular inspected to see whether they are in good condition.

• All transition load point should have enough light facilities.

• Fence should be provided under gravity type tensioning devices and the area where man easily access.