Hangzhou Cuberyllium Metal Technology Co.,Ltd.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 200T/Month |
| Delivery Time | 10~15days |
| Packaging Details | Pack in coil+waterproofing winding film+Drier+Wooden Case |
| Name | CUBE2-UNS.C17200 BERYLLIUM COPPER RODS |
| CUBERYLLIUM® Grade | CUBERYLLIUM® 172 |
| Standard | ASTM Standard |
| Safe Handling | No special health risk. |
| Machining Property | Good |
| Surface | Bright/Polished |
| Flatness | Good |
| State | TF00 |
| Dia. | 12MM 15MM 20MM 25MM 30MM |
| Application | for industry |
| Brand Name | CUBERYLLIUM® |
| Model Number | CUBE2-UNS.C17200 |
| Certification | ISO,SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
Beryllium Copper Rod / Strip/ Plate / Wire / Tube C17200 C17300 C17510 C17500
Soft TB00 Beryllium Copper Alloy Strip BrBNT1.9 Qbe1.9 0.3mmx200mm For
CuBe2(Qbe2.0) Beryllium Bronze Wires 0.1-0.8mm For High Precision Electronics
8.25gcm3 Density Beryllium Copper Foil Strip QBe2 Thickness 0.1mm 0.2mm 0.4mm 0
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 200T/Month |
| Delivery Time | 10~15days | Packaging Details | Pack in coil+waterproofing winding film+Drier+Wooden Case |
| Name | CUBE2-UNS.C17200 BERYLLIUM COPPER RODS | CUBERYLLIUM® Grade | CUBERYLLIUM® 172 |
| Standard | ASTM Standard | Safe Handling | No special health risk. |
| Machining Property | Good | Surface | Bright/Polished |
| Flatness | Good | State | TF00 |
| Dia. | 12MM 15MM 20MM 25MM 30MM | Application | for industry |
| Brand Name | CUBERYLLIUM® | Model Number | CUBE2-UNS.C17200 |
| Certification | ISO,SGS | Place of Origin | China |
| High Light | Bright C17200 Beryllium Copper Rods ，15mm Beryllium Copper Round Bar ，Industry C17200 Beryllium Copper Rods | ||
CUBE2-UNS.C17200 BERYLLIUM COPPER RODS DIA.12MM 15MM 20MM 25MM 30MM
Introduction of CuBe2-UNS.C17200 Grade Mateial:
Be: 1.80-2.00; Ni + Co: 0.20 Min; Ni +Co +Fe: 0.60 Max; Al: 0.20 Max; Si: 0.20 Max; Cu: Balance
| High hardness |
| High explosion resistance |
| Good corrosion resistance |
| High electrical conductivity |
| Excellent heat dissipation performance |
| High yield limit and fatigue limit |
The alloy has high chemical stability in the atmosphere, fresh water and sea water, has a small intergranular corrosion tendency and is resistant to impact corrosion. It also has good corrosion resistance in media such as dilute hydrochloric acid, acetic acid and phosphoric acid, but the corrosion speed is faster in wet ammonia, nitric acid and chromate solutions.
As Cube2 beryllium copper is easy to process and with its cooling effect, it is used in various fields:
| Electromic and electrical equipment |
| Aerospace |
| Automobile manufacturing |
| Hot runner cooling systems |
| Communication preparation equipment |
| Instrumentation |
| High electronics |
| Plastic and optical molds |
| Mold cores |
| Punches |
Material Standard of CuBe2:
| DIN | ASTM | RWMA |
| w.nr.2.1247 | C17200 | Class IV |
Technical parameters of CuBe2:
| Density | 8.36g/cm³ |
| Hardness | 36-46HRC |
| Tempere | TB00, TF00, TH04, TD04 |
| Thermal Expansion Coefficient | 17.5×10-6m/m℃ |
| Thermal Conductivity | 105W/m℃ |
| Melting Point(solidus) | 870℃ |
Product Photos:
CuBe2-UNS.C17200 Grade Mateial Aging
The aging of the parts should be carried out in a special fixture to prevent warping, deformation and ensure the dimensional accuracy of the parts. When bright treatment is required, a controlled atmosphere or vacuum furnace should be used. When the surface quality is not high or surface oxides are to be removed in subsequent processes, neutral salt furnaces or air circulation furnaces are allowed.
Surface treatment process
Soak in aqueous sodium hydroxide solution
Surface finish
To loosen the oxide film, then pre-corrode in aqueous hydrochloric acid solution, and finally perform bright treatment in a mixture of sulfuric acid and nitric acid.
Passivation treatment
Weakly corrode in dilute sulfuric acid solution first, then impregnate in a mixture of tyrosine (90g/L) and sulfuric acid (30g/L) at room temperature.
Machining and Grinding Performance The machinability of the alloy is 20% of that of the free-cutting brass HPb63-3.
FAQ:
1. How can I contact with your company?
We are always ready to serve you via Email, Telephone, Fax, Whatsapp or Mobile telephone.
Mobile/Wechat/Whatsapp: +86-17376550856
Email:info@cuberyllium.com
2. What is the lead time?
Usually 7 days after payment has been confirmed.
3. What is your payment terms?
T/T,L/C,Western Union,MoneyGram,Paypal.
4. What’s your advantage?
1) Professional production equipment.
2)Smooth surface.
3) Complete specification
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2002
Total Annual:
8000K-10000K
Employee Number:
100~130
Ecer Certification：
Verified Supplier
Cuberyllium Metal Technology Co.,Ltd., is a national-level high-tech company. It is a production-oriented enterprise mainly engaged in the production of high-performance beryllium copper materials. CUBERYLLIUM® established in 2002 years and located in Zhejiang Prov., China. It is a membe... Cuberyllium Metal Technology Co.,Ltd., is a national-level high-tech company. It is a production-oriented enterprise mainly engaged in the production of high-performance beryllium copper materials. CUBERYLLIUM® established in 2002 years and located in Zhejiang Prov., China. It is a membe...
Get in touch with us
Leave a Message, we will call you back quickly!