Shanghai Juyi Electronic Technology Development Co., Ltd
| Payment Terms | T/T,L/C,Paypal |
| Supply Ability | 1000pcs/day |
| Delivery Time | 3-5 working days |
| Packaging Details | PE bag+ carton |
| Operating Voltage | 12V-24V-48V |
| Color | green |
| Working Temperature | -20℃—85℃ |
| Speed Pulse Output | Yes |
| Analog Voltage | 0-5V |
| PWM speed control | PWM frequency:1-20KHZ; Duty cycle 0-100% |
| Brand Name | JUYI |
| Model Number | JYQD_V6.3B |
| Certification | ISO9001:2015 |
| Place of Origin | China |
View Detail Information
Explore similar products
12V 24V 36V BLDC Motor Driver Motor Controller for 3 Phase Sensorless DC Motor
12V-24V 15A BLDC Motor Controller PWM Speed Driver For Sensorless BLDC Motor
12V-36V JUYI Brushless Motor Controller Driver Board With Three-phases for
JUYI JYQD-V8.3E Bare Board Bldc Motor Control Board , High Voltage Dc Motor
Product Specification
| Payment Terms | T/T,L/C,Paypal | Supply Ability | 1000pcs/day |
| Delivery Time | 3-5 working days | Packaging Details | PE bag+ carton |
| Operating Voltage | 12V-24V-48V | Color | green |
| Working Temperature | -20℃—85℃ | Speed Pulse Output | Yes |
| Analog Voltage | 0-5V | PWM speed control | PWM frequency:1-20KHZ; Duty cycle 0-100% |
| Brand Name | JUYI | Model Number | JYQD_V6.3B |
| Certification | ISO9001:2015 | Place of Origin | China |
| High Light | 12V BLDC motor driver with JY01 IC ，24V BLDC motor driver 10A current ，48V BLDC motor driver wide voltage | ||
JUYI 12V 24V 36V 48V Wide Voltage 3 Phase bldc Motor Controller 10A with JY01 IC
1. Confirm the voltage and power parameters of the motor; they must not exceed the range specified by this driver board.
2. This driver board is suitable for driving three-phase brushless DC motors, but not all three-phase brushless DC motors can
be used directly. If poor driving effects occur (such as startup jitter, reverse rotation, excessive current at high motor speeds,
unstable rotational speed, reduced efficiency, or failure to start after loading), customers can adjust parameters such as
resistors and capacitors on the driver board according to actual conditions to achieve the optimal driving effect .
3. The JYQD_V6.3B driver board is a bare board. For driving motors with power below 100W, forced heat dissipation is not
required, but normal ventilation must be ensured.
4. The 5V output port on the driver board prohibits external electrical equipment connection; it is only suitable for connecting
external potentiometers and switches to this board for speed regulation and direction reversal.
5. The "Signal" terminal on the JYQD_V6.3B driver board is the motor speed pulse output signal, with an output current of less
than 5mA.
PRODUCT DIAGRAM
PORTS DESCRIPTION:
1. Control Ports (SET)
♦ GND: Internal control ground of the driver board.
♦ VR: Speed control port. Analog voltage speed regulation (0V-5V), with linear speed adjustment from low to high.
PWM speed regulation requires a common ground with the driver board.
♦ Z/F: Forward/reverse control port. Connect to 5V or leave it floating for rotation in one direction; connect to GND
for rotation in the other direction.
♦ Signal: Motor speed pulse signal output port, providing 5V pulse signals.
♦ 5V: Internal 5V output of the control board, only used to power potentiometers, switches for speed regulation and direction reversal.
2. Power Ports
♦ P+/VCC: Positive terminal of the DC power supply (+)
♦ P-/GND: Negative terminal of the DC power supply (-)
♦ MC: One of the three-phase wires of the motor
♦ MB: One of the three-phase wires of the motor
♦ MA: One of the three-phase wires of the motor
3. Note that the motor's phase wires and Hall wires should not be too long; excessive wire length may cause signal interference issues.
4. For the control terminals, the ports adopt a 2.54mm pitch. For the power terminals, a 3.96mm pitch is used.
5. When adding a heat sink or installing the driver board, pay attention to the insulation of the driver board.
PPRDUCT DIMENSION DRAWING:
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Shanghai Juyi Electronic Technology Development Co., Ltd established in 2010, Its a high-tech enterprise specializing in research, development, production and sales of brushless motor controller products. Its headquarters and research and development base are established in international economy, fi... Shanghai Juyi Electronic Technology Development Co., Ltd established in 2010, Its a high-tech enterprise specializing in research, development, production and sales of brushless motor controller products. Its headquarters and research and development base are established in international economy, fi...
Get in touch with us
Leave a Message, we will call you back quickly!