High Efficiency Bottom Ash Handling System For Cooling Bulk Material

Product Specification

  Rotary ash cooler,Its material is 1Cr18Ni9Ti and Q235,for the CFB boiler:

  Drum Type Ash Cooler:

  General Introduction:

  The drum type ash cooler is a drum type heat exchanger used for cooling the bulk material, the structure and heat exchanging process of which are different from that of the usual heat exchanger. For the drum type ash cooler, three methods of heat transfer as thermal radiation, conduction, and convection are working in the same time, and primary cooling medium is water and the secondary is air. It is a high efficiency ash cooling equipment, which is designed to meet the requirement of the large-volume CFB boiler. The drum ash cooler consists of drum, ash filling device, ash discharge device, drive device, transmission device, cooling water system and electric control device, which is specifically used for the hot ash cooling of CFB boiler

  Main Structure:

  1, The drum ash cooler consists of drum, rotating system, drive system, ash falling device, ash discharge device, cooling water system and electric control device. The main structure and functions are as follows:

  2, Drum: it is composed by the inner drum and outer drum, and form an enclosed water cavity together with rotary joint and water return pipe. The inner wall of the inner drum has welded with spiral-arranged screw blades and longitudinal blades, which can transfer the heat of slag to the circulating cooling water by thermal conduction, convection and radiation.

  3, The drum is the major working part of the drum ash cooler, and the ash cooler can be divided into GTL series single drum ash cooler and GTLS series multi-tube screening drum ash cooler according to the structure of the drum.

  4, Rotating system: it is composed of supporting ring, supporting wheel, and catch wheel. The supporting ring is installed in the outside of the drum, which is driven by the driving mechanism to push the drum rotating on the four supporting wheels. The height of the drum can be set by adjusting the supporting wheel. The catch wheel can limit the axial displacement of the drum.

  5, Ash falling device: it is made up of manhole, expansion joint, ash falling pipe, ash tank, ash sealing device. The boiler bottom ash will fall into the drum of the ash cooler through the ash filling pipe. The ash tank has a negative-pressure sealing port. The ash sealing device can prevent the ash from leaking by the anti-spin action.

  6, Ash discharge device: it is composed of ash outlet sealing cover and ash outlet, and installed with negative-pressure air port and ash discharge port. The sealing cover is made up of two removable parts (upper and lower parts), which is convenient for maintenance.

  7, Cooling water system: it is made up of rotating joint, water pipe to drum, return water pipe, metal hose. This system can bring away the heat absorbed from the ash. The rotating joint distributes the inlet water and return water evenly at the outlet end, which is convenient for maintenance and safe as well. The rotating joint is equipped with safety accessories as pressure meter, RTD, safety valve. Those accessories can be installed on the cooling water pipeline in accordance with the requirement of the works.

  8, Electric control device: it mainly refers to the electric control cabinet and related control instrument, which can supply power and control signals to ash cooler. It can send out remote signal to achieve remote control.